Panasonic BM-ET330 Precautions, General Safety Requirement, To avoid fire or personal injury

Page 8
0 °C to 40 °C {32 °F to 104 °F}
30 % to 80 % relative humidity, non- condensing
12 V DC/24 V AC

PRECAUTIONS

General Safety Requirement

For Installation:

Refer all work related to the installation of the appliance to qualified service personnel or system installers.

Consult an expert for help in evaluating load bearing capacity of the installation surface and structure. If the surface is not strong enough, the appliance may fall down. Refer to the appliance specifications for weights.

To avoid fire or personal injury:

Do not drop metallic parts through slots. This could permanently damage the appliance.

Do not attempt to disassemble the appliance.

There are no user-serviceable parts inside. Panasonic is not responsible for regulatory compliance of a disas- sembled Panasonic appliance by unauthorized person- nel. Contact qualified service personnel for mainte- nance.

Do not strike or shake the appliance.

Handle the appliance with care, or it could cause the trouble of it.

Do not expose nor operate the appliance in wet/damp conditions.

Take immediate action if the appliance gets wet. Refer servicing to qualified service personnel. Moisture could damage the appliance and also cause electric shocks.

Do not use strong or abrasive detergents when cleaning the appliance.

Use soft and dry cloth to clean the appliance when it is dirty. When the dirt is hard to remove, use a mild deter- gent and wipe gently.

Do not use the appliance beyond operating requirements.

It is designed to operate properly for environment spec-

ified below: Temperature Humidity

Source voltage

Important notes specific to the appliance:

This unit has no power switch.

Power is supplied from an external 12 V DC/24 V AC power-supply device. Refer to service personnel for how to turn on/off the power.

Note: While the power is turned off, recognition and entrance will NOT be available.

The third-party external power supply should meet the specifications. (Refer to p. 35.)

Replacement part

Exchange the following parts for the same type. F1: K5D402BK0002

Adopting tamper-proof structure.

Refer to service personnel for relocating or servicing the appliance.

As the unit has been designed in tamper-proof struc- ture, buzzer sound will be activated with alarm notifica- tion when you try to open the front cover or detach the appliance from the wall. Then, recognition will become unavailable, the alarm notification will also be sent to the iris server, and the stored data may be erased from the unit.

Use of near-infrared ray

Near-infrared ray is used when iris data are captured by the appliance. The near-infrared ray is compliant with the radiological safety standard of IEC60825-1.

Indication label

Refer to the indication placed on the bottom of the appliance as to the indications of equipment classifica- tion and power source, etc.

This appliance is not designed to prevent theft.

The appliance is designed to perform roles of capturing personal iris data, of recognizing individuals and of pro- ducing output signals only. To ensure your entrance/gate security, you must use the appliance together with other security system or devices including electric locks.

Panasonic is NOT RESPONSIBLE FOR ANY CRIME OR TROUBLE CAUSED BY USING THIS APPLIANCE.

In some cases, recognition or enrollment doesn’t work properly.

It could be invalid in recognition or enrollment when the appliance has difficulty in getting iris information due to dirt in front of lens, reflection of glasses or insufficiency of physical requirement.

Iris data is a nature of privacy.

Take enough care not to leak the data out of the iris server. It is also recommended that you should get an agreement from a person to register his or her data.

8

Image 8
Contents Operating Instructions English Version Important Safety Instructions Limitation of Liability Trademarks and Registered TrademarksContents Preface As a recognition iris reader for iris recognitionFeatures Access control system can be composedSupporting a common access control interface Built-in video surveillance cameraTo avoid fire or personal injury PrecautionsGeneral Safety Requirement Settings of this appliance are configured by the iris server Document Convention Notification about this Document External View Front ViewRear tamper detection switch Rear ViewInternal View Mounting hook holeConnection terminal Specifications of RS-485 Connectors for Card Reader Specifications of Alarm Output Connectors AcceptInstallation and Connections Description about the Connection ExampleNotification about the Installation Site PreparationPreparing the Necessary Items Cable PreparationCheck the Capturing Range Installation Space and Recognition RangeKeep the Installation Space Installation WallAttach the LAN cable to the LAN connector Instructions for Proper Enrollment and Recognition If you are wearing contact lensesYes How to Position Your Eyes in the MirrorStand where you can see the iris reader from the front side Hold the tilt handles at the sides of the front panel Make sure that you can see both eyes in the mirrorIf You are Wearing an Eyepatch, etc Cases of Enrollment/Recognition FailureHow to Carry out Enrollment Stand Sit down in front of the iris readerIf you are wearing glasses/sunglasses, take them off Start iris image capturingResult is output How to Carry out Recognition Recognition by an Iris Reader onlyMove your face so as your eyes are positioned within 50 cm 64 ft. from the iris readerDuring capturing, open your eyes widely Voice guidance Recognition by an Iris Reader and a Card ReaderPass a card through the card reader Rejectaccept Troubleshooting When Enrollment/Recognition Becomes InvalidBefore Requesting for Repair Cases of Enrollment/Recognition FailureProblem Check item Remedy Specifications GeneralInput/Output FunctionStandard Accessories Osaka, Japan

BM-ET330 specifications

The Panasonic BM-ET330 is a state-of-the-art electronic message board designed to meet the modern demands of communication in various professional environments. This device seamlessly combines functionality and advanced technology, making it an ideal solution for businesses, educational institutions, and public spaces.

One of the standout features of the BM-ET330 is its high-resolution display. The screen ensures that messages are clear and easy to read from a distance, making it perfect for capturing attention in busy areas. With vibrant colors and sharp text, users can convey information effectively and attractively.

The BM-ET330 employs cutting-edge LED technology, allowing for significant energy savings compared to traditional displays. This environmentally friendly design not only lowers operational costs but also reduces the device's carbon footprint. The long lifespan of LED components further enhances its value, as users can expect years of reliable service without the need for frequent replacements.

Another notable aspect of the BM-ET330 is its user-friendly interface. The device supports intuitive navigation, allowing users to create, edit, and manage messages effortlessly. Whether it's a promotional announcement, schedule information, or directional signage, the functionality of the BM-ET330 makes it easy to keep communication up to date.

Connectivity is also a key characteristic of the BM-ET330. It offers multiple connection options, including USB, Ethernet, and wireless capabilities. This versatility allows users to upload content and updates from various devices, ensuring that information can be shared quickly and efficiently.

Moreover, the BM-ET330 includes robust scheduling features. Users can automate messages to display at specific times or dates, making it a highly efficient tool for ongoing communication needs. This can be especially beneficial for businesses looking to promote special offers, announce events, or provide timely information to customers and employees alike.

In conclusion, the Panasonic BM-ET330 is a remarkable electronic message board that stands out due to its high-quality display, energy-efficient LED technology, user-friendly interface, and versatile connectivity options. Its scheduling features further enhance its applicability for a variety of communication needs, making it an excellent investment for anyone looking to modernize their messaging system.