Panasonic PV-GS29, PV-GS39 Indication appears, Ill To Cancel the Image Stabilizer, Function

This function is useful when you want to record close-up shots of subjects located beyond a normal zoom range of 1× to 30× magnification. With the Digital Zoom Function, you can select a magnification from 50× up to 1000×.

* Bet to Tape Recording Mode.

1Bet [ _ ADVANCED] >> [ [] D.ZOOM] >> [_0x] or [1000×].

If the Camcorder is shaken while recording, the camera shake in the image can be corrected.

•If the Camcorder shakes too much, the images may not be stabilized.

•Set to Tape Recording Mode.

1 Bet [_ADVANCED] >> [_ EIS] >> [ON].

OFF	Optical	zoom	only	(Up	to 30×)
50x	IDigital	zooming	to	50×
	i
_Dgta		zoom ng to		1000×

2 Push the [W/T] Lever towards [W] or

towards [T] to zoom in or out.

-_,voL+

• The [ _ ] Indication appears.

2Press the Recording Start/Stop Button or [PHOTO SHOT] Button to start recording.

__ ,, _

IIITo Cancel the Digital Zoom Function

Set [ _ ADVANCED] >> [ [] D.ZOOM] >> [OFF].

Notes:

, The larger the digital zoom magnification, the more the image quality is degraded.

. When the Card Recording mode is used, the Digital Zoom Function cannot be used.

,White Balance cannot be set in the Digital Zoom range.

. When pushing the [W/T] Lever as far as it will go, you can zoom from f × to 30× in 3.3 seconds at the maximum in the Recording Mode,

. The zoom speed varies according to the amount of movement of the [W/T] Lever,

°The Variable Speed Zoom Function cannot be used with the Remote Control, (PV-GS59 Only)

Ill To Cancel the Image Stabilizer

Function

Set [ _ ADVANCED] >> [ _ EIS] >> [OFF].

Notes:

•When the MagicPix Function is used, the image

stabilizer function does not work. If so, the [ [_[] ] indication flashes.

•When the Gain Up mode is set to ON, the image

stabilizer	function does not work. If so, the [ _	]
indication	flashes.

•Under fluorescent lighting, image brightness may change or colors may not look natural.

•After-images may appear.

•When a tripod is used, we recommend that you turn the Image Stabilizer off.

•In the following cases, the Image Stabilizer Function may not work effectively.

-When the digital zoom is used

-When a conversion lens is used

-When recording is done in an extremely dark place

-When the Camcorder is shaken greatly

-When you record a moving subject while tracking it

36