Panasonic PV-GS39 Connect to the TV with the AM Cable O, Turn on this Camcorder and set the Mode

Notes:

o The Lock Setting carried out by this Camcorder is only effective for this Camcorder.

o The SD Memory Card has a write protection switch

on it. If the switch is moved to the [LOCK] side, you cannot write to or format the Card. If it is moved

back. you can.

If a Card becomes unreadable by the Camcorder, format it for reuse. Formatting erases all the data recorded on a Card,

•When formatting the card all protected files (lock) are also deleted.

•Set to Picture Playback Mode.

. The One-Touch Navigation icon is displayed on the lower right of the screen.

1Set [ _ ADVANCED] >> [ 1_ FORMAT CARD] >> [YES].

•A confirmation message appears, select [YES] and formatting will be carried out.

•When the formatting is completed, the screen becomes gray.

Notes:

. Normally, it is not necessary to format the card. If a message appears even though you insert and remove the card several times, format it.

o In order to maintain full compatibility_ you must format the SD Memory Card using the Camcorder.

. PC formatted SD Memory Cards are not compatible with the Camcorder.

. The Camcorder supports SD Memory Cards formatted in FAT12 system (for SD Memory Card of 8, 16_ 32 and 64 MB) and FAT16 system (for

SD Memory Card of 128,256,512 MB, 1 GB and 2 GB).

By connecting your Camcorder with your TV_ the recorded scenes can be viewed on your TV screen.

•Before connecting them_ turn off the power of both the Camcorder and TV.

Insert a recorded tape into this

Camcorder.

2Connect the [AV OUT] Jack of the

Camcorder and the Video and Audio input Jacks of the TV.

_[VIDEOIN]

[AUDIO IN]

. Connect to the TV with the AM Cable O.

3 Turn on this Camcorder and set the Mode

Dial to the Tape Playback Mode.

4 For PV=GS39/PV-GS69 users :

Set [/_ SETUP] >> [ _ TV ASPECT] >> [4:31 or [16:91 .

5Select the input channel on the TV.

6Move the Joystick Control [A] to _@_ select the [ _, ] to start playback. _

" theTheTV.imageand audio are output on _ _

7Move the Joystick Control IT] to select the [ ! ] to stop playback.

I If the image or audio from this

Camcorder is not output on the TV

o Check that the plugs are inserted as far as they

go.

. Check the [12 bit AUDIO] settings. o Check the connected terminal.

o Check the TV'sinput setting (input switch). (For more information_ ptease read the operating instructions for the TV.)

,<

o Q., tb

51