Player, Press the Button to start playback

Player:

3 Press the [_] Button to start playback.

Recorder:

4Set [ _ ADVANCED] >> [ ®,, REC STDBY]

>>[YES], then move the Joystick Control [J,] to select [ ®/_l].

Or, while pressing the [o REC] Button, press the [1_] Button on the Remote Control. (PV-GS59 Only)

•Recording starts.

IIITo Cancel the Standby for Recording When the Camcorder is on standby for recording, move the Joystick Control [_']and select the [ [] ] or press the [ B ] Button on the Remote Control.

IIITo Stop Dubbing

Press the [Im] Button or the [ g ] Button, or move the Joystick Control [,L] to select [ ®/_1]again.

Unauthorized exchanging and/or copying

of copyrighted recordings may be copyright

CAUTION:i infringement.

Notes:

o Do not plug or unplug the DV Cable during dubbing, or the dubbing may not be completed properly.

. If a picture (bilingual video, etc.) containing main sound and sub sound has been dubbed, select the desired sound by [ _ SETUP] >> [ J_ AUDIO OUT] on playback.

. Regardless of the menu settings on the recorder, digital dubbing is carried out in the same mode as the [ _ AUDIO REC] mode of the playback tape.

. The images on the recorder monitor may be disturbed, but it does not affect the recorded images.

o Even if you use a device equipped with DV Terminals such as IEEE1394, you may not be able to perform Digital Dubbing in some cases. For more

information, see the instructions for equipment connected.

•Date or other information to be displayed cannot be displayed if the software of the connected equipment does not support the display function.

•While pictures are input from the DV terminal, the One-Touch Navigation icon blinks on instead of appearing from the side of the screen when you press the center of the Joystick Control.

•While pictures are input from the DV terminal, the TV aspect will not change even if you change the setting for [ _ TV ASPECT] in the [ _ SETUP] menu.

A video clip can be transferred directly to your PC (Personal Computer) via a DV interface Cable (Optional) using products and software from a number of video editing software companies.

Using products from video editing software

companies allows you to capture and edit video clips using the DV Interface.

I Our DVC being OHCl compliant should _

have no problem working with any OHCl compliant Firewire Card/video- Editing

•Personal Computer must be equipped with an DV Terminal.

• During Camcorder playback, do not disconnect the m DV Interface Cable or turn the Camcorder off as

this may cause a PC hang-up error.

•1394 (i.LINK) Interface must conform to OHCt (Open Host Controller Interface Specification).