Panasonic Mastering Playback Functions for PV GS29 and PV GS39 Camcorder Accessories

Playback Mode

The recorded scene can be played back immediately after the recording.

o Open the LCD Monitor or extend the Viewfinder before turning on the power.

1Set the [OFF/ON] Switch to [ON],

•The [STATUS] Indicator lights Red.

OFF, "ON ®

2Set the Mode Dial to Tape Playback Mode,

•The [ [] TAPE PLAYBACK MODE] is displayed on the screen.

•The One-Touch Navigation icon is displayed on the lower right of the screen.

Adjust the speaker volume for playback.

1Push the [- _ / VOL +] Lever to adjust the volume.

. Towards [+]: increases the volume Towards [-]:decreases the volume

(Nearer the bar to [+], larger the volume.)

-_ v01+

WT

On the Remote Control, press the [T] Button to increase the volume or the [W] Button to decrease it. (PV-GS59 Only)

3 Move the Joystick Control [41 to rewind the tape.

•Rewind the tape to the point where you want to start playback.

•When the tape reaches the beginning, rewinding stops automatically.

Move the Joystick Control [A] to start playback.

• The [1_] Indication appears.

•If a cassette recorded with copyright protection signal is played back, the picture is distorted by mosaic-like patterns.

I	To	Pause		Playback
	Move		the	Joystick	Control	[A] to	seiect[	_l	]
	during		playback.
I	To	Stop		Playback
	Move		the	Joystick	Control	[_'] to	select	[ []	].

Notes:

•When the adjustment is completed, the volume indication [dd] wil( disappear.

•If you do not hear the sound, check the settings of

[ _ SETUP] >> [ [] 12bit AUDIO].		"O
		$-
		,<
When the tape end is reached, the tape will be
rewound and played back again.
1 Set [ _ ADVANCED]	>> [ © REPEAT PLAY]	o
		Q,,

>> [ON].

2Move the Joystick Control [A] to start

playback.

. The [O_] Indication appears.

I To cancel Repeat Playback Mode

Set [ 0 REPEAT PLAY] >> [OFF] or set [OFF/ON] Switch to [OFF].

. When you set [_ USB FUNCTION] >> [WEB CAM] and then connect the USB Cable, the Repeat Playback Mode is canceled.

•If you cannot listen to the desired audio when playing back a tape, check the settings in

[ _;_SETUP] >> [ [] 12bit AUDIO].

•When you record or dub the audio in [12bit] and set [ _ SETU P] >> [ [] 12bit AUDIO] >> [MIX], the audio will be played back in stereo sound regardless of the settings in [ J_ AUDIO OUT].

45