
This function reduces the sound of wind hitting the microphone when recording,
• Set to Tape Recording Mode.
1Set [ _ BASIC) >> [ _/_WIND CUT) >> [ON).
•The [ _,4]_Indication appears.
III To Cancel the Wind Noise Reduction Function
Set [ _;BASIC] >> [ _} WIND CUT] >> [OFF].
Notes:
= The default setting is [ON].
. Reduces the wind noise depending on the wind strength. (If this function is activated in strong winds, the stereo effect may be reduced. When the wind weakens, the stereo effect will be restored.)
This function is for recording a
•Set to Tape Recording Mode.
1 Set [_ BASIC] >> [ _ CINEMA] >> [ON).
*Black bars appear at the top and bottom of the screen.
IIITo Cancel the Cinema Function Set [ _ BASIC] >> [ _ CINEMA] >> [OFF].
Notes:
•images played back vary depending on the TV connected. Please refer to the operating instructions for your TV.
•This function does not widen the recording range.
•When images are played back on a TV screen, the Date/Time Indication may be erased in some cases.
•Depending on the TV, the picture quality may deteriorate.
•When a Cinema picture is imported onto a personal computer, the imported picture may not be displayed correctly, depending on the software in used.
|
|
|
|
|
| tD |
This allows you to record images compatible with | ||||||
TVs. |
|
|
|
| O | |
Wide Function: |
|
|
|
| P, | |
Images are recorded with a 16:9 | ||||||
|
| aspect | ratio. |
|
| |
4:3 Function: |
| Images | are recorded with | a 4:3 | ||
|
| aspect | ratio. |
| o | |
|
|
|
|
|
| cL |
Set to Tape/Card | Recording | Mode. | tb | |||
|
1Set [ _ BASIC) >> [ _ ASPECT) >> [4:3)
(4:3 Function) or [16:9) (Wide Function).
(4:3 Function) | (Wide (16:9) Function) |
Ill To Cancel the Wide/4:3 Function
Wide Function:
Set [ _ BASIC] >> [ _ ASPECT] >> [4:3]. 4:3 Function:
Set [ _ BASIC] >> [ _ ASPECT] >> [16:9].
Notes:
•In the
•When images are played back on a TV screen, the Date/Time Indication may be erased in some cases.
•Depending on the TV, the picture quality may deteriorate.
•If the 4:3 Function is set, the menus screen appears expanded vertically outside the screen.
•Concerning the TV to be connected and TV used for playback
-When playing back images taken by this unit on a TV screen, change the setting established by tape playback mode [ _ SETUP] >> [[88 TV ASPECT] to match the aspect ratio (4:3 or 16:9) of the TV monitor to be connected. (p. 51)
•Depending on the settings of the TV connected, the images may not be displayed properly. For more information, please read the operating instructions for the TV.
39