Sound is not pJayed back from the
Is the volume too low? During playback, push the [- _ / VOL +] lever to display the volume indication and adjust it. (p. 45)
Different sounds are reproduced at the same time.
Have you set [ ]_i SETUP] >> [ _ 12bit AUDIO] >> [MIX]? If you set [,.h AUDIO REC] >> [12bit] and dub audio to a recorded tape, you can hear the sound on recording and the sound dubbed at a later time. To hear the sounds separately, set to [ST1] or [ST2]. (p. 53)
Have you set [ _:_SETUP] >> [ _ AUDIO OUT] >> [STEREO] and reproduced a picture containing the main sound and sub sound? Set to [L] to hear main sound, and set to [R] to hear the sub sound. (p. 29)
Audio dubbing cannot be performed
. Is the accidental erasure prevention slider on the cassette open? If it is open (set to [SAVE]), audio dubbing cannot be performed. (p. lg)
Are you attempting to edit a tape portion that was recorded in LP mode? LP mode does not allow
audio dubbing. (p. 29)
The original sound was erased when audio
dubbing was performed
If you perform audio dubbing on a recording made in [16bit] mode, the original sound wilt be erased. If you wish to preserve the original sound, be sure to select [12bit] mode when recording.
Sounds cannot be played back.
Although a cassette with no audio dubbing is being played, have you set [ _;_SETUP] >> [ 12bit AUDIO] >> [ST2]? To play back a cassette with no audio dubbing, set [ _ 12bit AUDIO] >> [ST1].
Is the vabable speed search function activated? Press the [VER SEARCH] button on the Remote
Control to cancel the variable speed search function.
This phenomenon is characteristic of digital video systems. It is not a malfunction.
Horizontal stripes appear on images during
cue and review playback.
. Horizontal stripes may appear depending on the scene, but this is not a malfunction.
Although the Camcorder is correctly
connected to a TV, playback images cannot be seen.
Have you selected video input on the TV?
Please read the operating instructions of your TV and select the channel that matches the input terminals used for the connection.
Playback picture is not clear.
Are the heads of the Camcorder dirty? If the heads are dirty, playback image cannot be clear. Clean the heads by using the head cleaner for digital video. (p. 73)
If the terminal for the AV cable is soiled, noises may appear on the screen. Wipe the soil off the terminal with a soft cloth, and then connect the cable to the AV terminal.
Is a picture containing a copyright protection signal (copy guard) being recorded? When a protected picture is played back by the Camcorder,
Recorded pictures are not clear.
Have you set [ _ BASIC] >> [ _!= PICT. QUALITY]
>>[ ._. (Normal)]? If recording is done with it set to [=If. (Normal)], pictures with fine details may
include a
A file recorded on a card cannot be deleted. Is the file locked? Locked flies cannot be deleted. (p. 50)
For the SD Memory Card, if its write protect switch is set to [LOCK], then deletion is disabled. (p. 20)
Photoshot playback images do not look normal,
The picture may be damaged. In order to prevent the loss of image data, backing up on a cassette or a personal computer is recommended.
Even if a card is formatted, Jt cannot be used. Either the Camcorder or the card may be damaged. Please consult a dealer.
During playback, [UNPLAYABLE CARD] is
displayed.
. The image was either recorded in a different format, or data is damaged.
o
tD
77