If any one of the following indications lights up or flashes, please check the Camcorder.
Confirmatory Indications
:A cassette with the accidental erasure prevention slider placed in the [SAVE] position is inserted.
No cassette is inserted.
[] : The Warning/Alarm Indication appears when you record yourself. Turn the LCD Monitor towards the Viewfinder and check the Warning/Alarm Indication.
:No card is inserted.
REMOTE: An incorrect Remote Control mode has been selected. (p. 15)
END : The tape came to the end during recording.
@ : The video heads are dirty. (p. 73)
Textual Indications
[3_ DEW DETECT/[3_ EJECT TAPE: Condensation has occurred. Take out the cassette and wait for a while. It takes some time until the cassette holder opens, but this is not a malfunction. (p. 73)
TAPE END:
The tape came to the end during recording.
NEED HEAD CLEANING:
The video heads are dirty. (p. 73)
PUSH THE RESET SWITCH:
An irregularity in the equipment has been detected. Press the [RESET] Button (p. 78). This
may solve the problem.
LOW BATTERY:
The Battery is low. Recharge it. (p. 15)
NO TAPE:
No tape is inserted. (p. 18)
CHECK REMOTE MODE:
An incorrect Remote Control Mode has been selected, This is only displayed at the first operation of the Remote Control after
CHECK REC TAB:
You are attempting to record pictures on a tape with the accidental erasure prevention slider placed in the [SAVE] position.
You are attempting Audio Dubbing or Digital Dubbing on a tape with the accidental erasure prevention slider placed in the [SAVE] position,
WRONG TAPE FORMAT:
You are attempting to play back a tape section that has been recorded with a different TV
system, This cassette is incompatible.
CLOSE CASSETTE DOOR:
The cassette cover is open. Close the cassette cover. (pp. 18~19)
UNABLE TO A.DUB (LP RECORDED):
Because the original recording was in LP Mode,
audio dubbing cannot be performed.
UNABLE TO A.DUB:
You are attempting to perform audio dubbing on
a
COPY PROTECTED:
Images cannot be recorded correctly because the medium is protected by a copy guard.
CARD ERROR:
The Card is not compatible with this Camcorder. You are attempting to format a failed card.
It displays, when you attempt to insert the incompatible card to Card Slot.
NO CARD:
No card is inserted.
CARD FULL:
Card does not have sufficient memory remaining.
Select Picture Playback Mode and delete unnecessary files.
NO DATA:
There are no recorded files on the card.
UNPLAYABLE CARD:
You are attempting to play back data not compatible with this Camcorder.
FILE LOCKED:
You are attempting to erase protected files.
CARD LOCKED:
The write protection switch on the SD Memory Card is set to [LOCK].
CHANGE MODE TO USE USB:
The USB Cable is connected to the Camcorder
in Card Recording Mode.
CANCEL MAGICPIX MODE:
You are attempting to select an item other than [OFF] in [_[N SCENE MODE] during MagicPix Mode.
DISCONNECT USB CABLE:
You are attempting to turn the Mode Dial in PC Mode with the USB Cable connected to the Camcorder.
You are attempting to record pictures on a Tape/Card with the USB Cable connected to the Camcorder.
PC DOES NOT SUPPORT USB2.0:
The Camcorder is connected to a personal computer that does not support USB2.0.
CAN NOT USE USB:
You are connecting the USB Cable with the DV Cable connected in MotionDV Mode.
o
::r tD
71