Panasonic PV-GS29, PV-GS39 Indication and the One-Touch Navigation icon appears, 100002

3Move the Joystick Control [4] or [_] until the [ _ ] Indication is displayed.

4Point the Camcorder at a full-screen white subject.

5Move the Joystick Control [A] until the [ _ ] indication stops flashing.

II To Resume Automatic Adjustment Move the Joystick Control [_] or [1_] until the [ [_ ] Indication appears. Or, set the [AUTO/ MANUAL/FOCUS] Switch to [AUTO].

1)The effective range of Automatic White Balance Adjustment on this Camcorder

2)Blue sky

3)Cloudy sky (rain)

4)TV screen

5)Sunlight

6)White fluorescent lamp

7)Halogen light bulb

8)Incandescent light bulb

9)Sunrise or sunset

10)Candlelight

Notes:

•When the Camcorder is turned on with the Lens

Cap attached, the automatic White Balance adjustment may not function properly. Please turn the Camcorder on after removing the Lens Cap.

•When setting both the White Balance and the Iris/ Gain, set the White Balance first.

•Whenever recording conditions change, re-set the White Balance for correct adjustment.

The White Balance Sensor O determines the nature of the light source during recording.

O"

,Do not cover the White Balance Sensor with your hand during recording because White Balance will not function normally.

10000_2)

In the following cases, you cannot change White Balance:

. When you set the Zoom higher than 30× o When you display a Menu

. When you use the MagicPix Mode

About flashing of the [ _'_] Indication:

When the manual adjustment mode is selected

. Flashing indicates that the White Balance

previously adjusted is stored. This setting is stored until the White Balance is adjusted again.

When white balance cannot be set in the

manual adjustment mode

. White balance may not be adjusted properly in the manual adjustment mode in dark places. If

8000K	...............................................................	3)	so, use the auto white balance mode.
ooo_			During	setting in	the manual	adjustment	mode
7O00K	4)		, When	the setting	is completed,	it will keep	lit.
BO00K

SO00K5)_

--6),_

4000K

3O00K 7)

2O00K - 9)

-1o)

i 0O0K

Outside of the effective range of Automatic White Balance Adjustment, the image will become

reddish or bluish. Even within the effective range of Automatic White Balance Adjustment, the Automatic White Balance Adjustment may not function properly if there is more than one light source. In this case, adjust the White Balance.

Useful for recording fast-moving subjects.

• Set to Tape/Card Recording Mode.

1 Set the [AUTO/MANUAL/FOCUS] Switch to [MANUAL].

MANUAL"

AUT0i_

FOCU

•The [ _ ] Indication and the One-Touch Navigation icon appears.

42