AXIS Q1765–LE PT Mount Network Camera
Hardware Overview
Hardware Overview
NOTICE
Never remove both the sunshield and the PT Mount bracket. One of them must remain to keep the camera assembly intact.
1Sunshield
2RS485/RS422 connector
3Power connector
4Network connector
5Back cover
6Status indicator LED
7microSD memory card slot
8Control button
9PT Mount bracket
Connectors and Buttons
For technical specifications, see page 52.
Network Connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
NOTICE
The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer’s instructions. For information about regulatory requirements, see Electromagnetic Compatibility (EMC) on page 2 .
5