Axis Communications Q1765-LE PT user manual LED Indicators, Power Connector, RS485/RS422 Connector

Page 6

AXIS Q1765–LE PT Mount Network Camera

Hardware Overview

Power Connector

2-pin terminal block for power input. Use a Safety Extra Low Voltage (SELV) compliant limited power source (LPS) with either a rated output power limited to ≤100 W or a rated output current limited to ≤5 A.

RS485/RS422 Connector

Two terminal blocks for RS485/RS422 serial interface used to control auxiliary equipment such as PTZ devices.

SD Card Slot

A microSD card (not included) can be used for local recording with removable storage. For more information, see Technical Specifications on page 52.

NOTICE

To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System Options > Storage > SD Card and click Unmount.

Note

For SD card recommendations see www.axis.com

Control Button

The control button is used for:

Resetting the product to factory default settings. See page 47.

Connecting to an AXIS Video Hosting System service. See page 40. To connect, press and hold the button for about 3 seconds until the Status LED flashes green.

Connecting to AXIS Internet Dynamic DNS Service. See page 40. To connect, press and hold the button for about 3 seconds.

LED Indicators

LED

Color

Indication

 

 

 

Status

Unlit

Connection and normal operation

 

 

 

 

Amber

Steady during startup. Flashes during firmware upgrade.

 

 

 

 

Amber/red

Flashes amber/red if network connection is unavailable or lost.

 

 

 

 

Red

Flashes red for firmware upgrade failure.

 

 

 

 

Green

Shows steady green for 10 seconds for normal operation after restart.

 

 

 

Note

The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.

The Status LED can be configured to flash while an event is active.

The Status LED can be configured to flash for identifying the unit. Go to Setup > System Options > Maintenance .

6

Image 6
Contents Axis Q1765-LE PT Mount Network Camera Liability About this documentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q1765-LE PT Mount Network CameraFor technical specifications, see Connectors and ButtonsNetwork Connector RJ45 Ethernet connector with Power over Ethernet PoERS485/RS422 Connector LED IndicatorsPower Connector SD Card SlotAccess from the Internet Access the ProductAccess from a Browser Set the Root PasswordConfigure Capture Mode Set Power Line FrequencyPTZ Mode Live ViewAxis Media Control viewer toolbar Go to Setup EventsControls on the Live View Manual TriggerPTZ Controls How to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAxis Q1765-LE PT Mount Network Camera Set Up the Product Basic SetupVideo Stream Click Save to apply the new settingsVideo Pixel CounterStream Profiles 264Go to Setup Video Camera Settings Camera SettingsCapture Mode Image AppearanceWide Dynamic Range Exposure SettingsWhite Balance Shutter & GainBuilt-in IR Illuminations LEDs Date/Time Formats in the online help To enable overlaysOverlay Day/NightOverlay Image Go to Video Overlay ImagePrivacy Mask Use Overlay Text in an Action RuleGo to Events Action Rules Viewer Settings Configure the Live ViewDefault Viewer for Browsers Browser Viewer DescriptionUser Defined Links Preset Positions PTZ Pan Tilt ZoomGuard Tour Advanced Install PTZ DriverDevice Settings Control QueueAxis Q1765-LE PT Mount Network Camera Shock Detection Set Up Motion Detection WindowsDetectors Motion DetectionHigh level 100% Default valuesParameter Object Size History Sensitivity Description Medium level 50%Applications Install ApplicationGo to Setup Applications Application LicensesAxis Q1765-LE PT Mount Network Camera Add Recipients Set Up Action RulesEvents Go to Events Action Rules and click AddCreate Schedules Set Up RecurrencesSet Up Email Recipients Go to Events Schedules and click AddAxis Q1765-LE PT Mount Network Camera Continuous Recording RecordingsRecording List Go to Recordings ListLanguages Security To log in again and be configured to use this functionalitySystem Options UsersCertificates Go to Setup System Options Security CertificatesIeee Go to System Options Security IeeeIPv4 Address Configuration Basic TCP/IP SettingsClick Install certificate and upload the certificate Date & TimeARP/Ping IPv6 Address ConfigurationAssign IP Address Using ARP/Ping Linux/Unix syntaxAdvanced TCP/IP Settings Select Use the host name to set the host name manually Link-Local IPv4 AddressGo to System Options Security Https QoS Quality of Service Smtp emailRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM BonjourNetwork Share StorageSD Card To add a network shareCOM Port MaintenancePorts & Devices Port StatusSystem Overview SupportSupport Overview Logs & ReportsReset to Factory Default Settings Plain ConfigFile Upload Emergency Recovery Procedure TroubleshootingUpgrade the Firmware Check the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product is accessible locally but not externallyVideo Camera Settings Problems with streaming H.264Video and image problems, general Key framesRe-mount the storage device Storage and disk management problemsStorage disruption Reformat the SD card and then click MountTechnical Specifications Connectors Performance Considerations RS485/422 ConnectorRX pair for all modes combined RX/TX for 2-wire RS485 Function PinM1.8