Axis Communications Q1765-LE PT Controls on the Live View, Axis Media Control viewer toolbar

Page 9

AXIS Q1765–LE PT Mount Network Camera

Access the Product

Controls on the Live View Page

Click View size to scale the image down to 800 pixels wide or to full scale. Only available in MJPEG.

Select a stream profile for the Live View page from the Stream Profile drop-down list. For information about how to configure stream profiles, see page 16.

The Manual Trigger button is used to trigger an action rule from the Live View page. For information about how to configure and enable the button, see Manual Trigger on page 9 .

Click Snapshot to save a snapshot of the video image. This button is primarily intended for use when the

AXIS Media Control viewer toolbar is not available. Enable this button from Live View Config > Action Buttons.

The product’s heater is controlled by the ambient temperature and is turned on and off automatically. If required, the heater can be activated manually by clicking the Heater button. To show the button, go to Setup > Live View Config . Under Action Buttons, select Show heater button and specify the number of minutes the heater should be activated.

Activate or de-activate IR illumination from Setup > Video > Camera Settings. Move the slider to increase or decrease the intensity of the LEDs. Enable this button from Live View Config > Action Buttons.

Manual Trigger

The Manual Trigger is used to trigger an action rule from the Live View page. The manual trigger can for example be used to validate actions during product installation and configuration.

To configure the manual trigger:

1.Go to Setup > Events.

2.Click Add to add a new action rule.

3.From the Trigger drop-down list, select Input Signal.

4.From the second drop-down list, select Manual Trigger.

5.Select the desired action and configure the other settings as required. For more information about action rules, see Events on page 31.

To show the manual trigger buttons in the Live View page:

1.Go to Setup > Live View Config .

2.Under Action Buttons, select Show manual trigger button.

AXIS Media Control viewer toolbar

The AXIS Media Control viewer toolbar is available in Internet Explorer only. See AXIS Media Control (AMC) on page 11 for more information. The toolbar displays the following buttons:

9

Image 9

Contents Axis Q1765-LE PT Mount Network Camera Legal Considerations About this documentLiability Intellectual Property RightsLearn More SupportAxis Q1765-LE PT Mount Network Camera Table of ContentsNetwork Connector Connectors and ButtonsFor technical specifications, see RJ45 Ethernet connector with Power over Ethernet PoEPower Connector LED IndicatorsRS485/RS422 Connector SD Card SlotAccess from a Browser Access the ProductAccess from the Internet Set the Root PasswordPTZ Mode Set Power Line FrequencyConfigure Capture Mode Live ViewControls on the Live View Go to Setup EventsAxis Media Control viewer toolbar Manual TriggerPTZ Controls How to Stream H.264 Media StreamsAxis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis Q1765-LE PT Mount Network Camera Basic Setup Set Up the ProductVideo Click Save to apply the new settingsVideo Stream Pixel Counter264 Stream ProfilesCapture Mode Camera SettingsGo to Setup Video Camera Settings Image AppearanceWhite Balance Exposure SettingsWide Dynamic Range Shutter & GainOverlay Date/Time Formats in the online help To enable overlaysBuilt-in IR Illuminations LEDs Day/NightGo to Video Overlay Image Overlay ImagePrivacy Mask Use Overlay Text in an Action RuleGo to Events Action Rules Default Viewer for Browsers Configure the Live ViewViewer Settings Browser Viewer DescriptionUser Defined Links Preset Positions PTZ Pan Tilt ZoomGuard Tour Device Settings Install PTZ DriverAdvanced Control QueueAxis Q1765-LE PT Mount Network Camera Detectors Set Up Motion Detection WindowsShock Detection Motion DetectionParameter Object Size History Sensitivity Description Default valuesHigh level 100% Medium level 50%Go to Setup Applications Install ApplicationApplications Application LicensesAxis Q1765-LE PT Mount Network Camera Events Set Up Action RulesAdd Recipients Go to Events Action Rules and click AddSet Up Email Recipients Set Up RecurrencesCreate Schedules Go to Events Schedules and click AddAxis Q1765-LE PT Mount Network Camera Recording List RecordingsContinuous Recording Go to Recordings ListLanguages System Options To log in again and be configured to use this functionalitySecurity UsersIeee Go to Setup System Options Security CertificatesCertificates Go to System Options Security IeeeClick Install certificate and upload the certificate Basic TCP/IP SettingsIPv4 Address Configuration Date & TimeAssign IP Address Using ARP/Ping IPv6 Address ConfigurationARP/Ping Linux/Unix syntaxAdvanced TCP/IP Settings Select Use the host name to set the host name manually Link-Local IPv4 AddressGo to System Options Security Https Smtp email QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 BonjourSD Card StorageNetwork Share To add a network sharePorts & Devices MaintenanceCOM Port Port StatusSupport Overview SupportSystem Overview Logs & ReportsReset to Factory Default Settings Plain ConfigFile Upload Upgrade the Firmware TroubleshootingEmergency Recovery Procedure Check the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyVideo and image problems, general Problems with streaming H.264Video Camera Settings Key framesStorage disruption Storage and disk management problemsRe-mount the storage device Reformat the SD card and then click MountTechnical Specifications Connectors RX pair for all modes combined RX/TX for 2-wire RS485 RS485/422 ConnectorPerformance Considerations Function PinM1.8