52 en Advanced Mode | IP Camera 200 Series |
|
|
further information, contact your local customer service at Bosch Security Systems.
6.5.1Storage Management
Device manager
If the VRM option is activated, the VRM Video Recording Manager manages all recording and no further settings can be configured here.
Note:
Activating or deactivating VRM causes the current settings to be lost; they can only be restored through reconfiguration.
Recording media
Select the required recording media to activate them and then configure the recording parameters.
iSCSI Media
If an iSCSI system is selected as the storage medium, a connection to the desired iSCSI system is needed to set the configuration parameters.
The storage system selected must be available on the network and completely set up. Amongst other things, it must have an IP address and be divided into logical drives (LUN).
1.Enter the IP address of the required iSCSI destination in the iSCSI IP address field.
2.If the iSCSI destination is password protected, enter this into the Password field.
3.Click the Read button. The connection to the IP address is established. The Storage overview field displays the logical drives.
Local Media
The supported local recording media is displayed in the storage overview field.
SD card recording performance is highly dependent on the speed (class) and performance of the SD card. An SD card of Class 4 or higher is recommended.
| Installation and Operation Manual | Bosch Security Systems |