Axis Communications P3384-V Axis Media Control viewer toolbar, Manual Trigger, Go to Setup Events

Page 10

AXIS P3384–V Fixed Dome Network Camera

Access the Product

Click the Active/Inactive buttons to manually activate and inactive the product’s output port. For information about how to enable and configure output buttons, see page 27.

The Manual Trigger button is used to trigger an action rule from the Live View page. For information about how to configure and enable the button, see Manual Trigger on page 10.

Click Snapshot to save a snapshot of the video image. This button is primarily intended for use when the

AXIS Media Control viewer toolbar is not available. Enable this button from Live View Config > Action Buttons.

The Audio clip drop-down list allows you to play an audio clip from the Live View page. Select the audio clip and click the Play button.

The product’s fan is controlled by the ambient temperature and is turned on and off automatically. If required, the fan can be activated manually by clicking the Fan button. To show the button, go to Setup > Live View Config . Under Action Buttons, select Show fan button and specify the number of minutes the fan should be activated.

Activate or de-activate IR illumination from Setup > Video & Audio > Camera Settings. Move the slider to increase or decrease the intensity of the LEDs. Enable this button from Live View Config > Action Buttons.

Manual Trigger

The Manual Trigger is used to trigger an action rule from the Live View page. The manual trigger can for example be used to validate actions during product installation and configuration.

To configure the manual trigger:

1.Go to Setup > Events.

2.Click Add to add a new action rule.

3.From the Trigger drop-down list, select Input Signal.

4.From the second drop-down list, select Manual Trigger.

5.Select the desired action and configure the other settings as required. For more information about action rules, see Events on page 35.

To show the manual trigger buttons in the Live View page:

1.Go to Setup > Live View Config .

2.Under Action Buttons, select Show manual trigger button.

AXIS Media Control viewer toolbar

The AXIS Media Control viewer toolbar is available in Internet Explorer only. See AXIS Media Control (AMC) on page 13 for more information. The toolbar displays the following buttons:

The Play button connects to the Axis product and starts playing a media stream.

The Stop button stops the media stream.

10

Image 10

Contents Axis P3384-V Fixed Dome Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis P3384-V Fixed Dome Network CameraReset to Factory Default Settings Connectors Performance ConsiderationsConnector Connectors and ButtonsNetwork Connector Hardware Overview SD Card Slot LED Indicators Audio Connector Control ButtonAccess from the Internet Access the ProductAccess from a Browser Set the Root PasswordControls on the Live View Set Power Line FrequencyLive View Click Use HttpsManual Trigger Go to Setup EventsAxis Media Control viewer toolbar To show the manual trigger buttons in the Live ViewPTZ Controls AMC Audio ControlsAxis P3384-V Fixed Dome Network Camera Media Streams How to Stream H.264Axis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingSet Up the Product Basic SetupVideo Stream Click Save to apply the new settingsVideo and Audio ImageStream Profiles MjpegImage Appearance Camera SettingsLightfinder Mode White BalanceShutter & Gain Exposure SettingsIris adjustment Set Shutter toOverlay Select an Aspect ratio and a Video stream resolutionView Area Go to Video & Audio View AreaOverlay Image Privacy MaskGo to Video & Audio Overlay Image Focus & Zoom Audio SettingsWhen satisfied, click Enable iris to enable the iris Audio ModesAudio Input Audio OutputAudio Clips Viewer Settings Configure the Live ViewDefault Viewer for Browsers Browser Viewer DescriptionOutput Buttons Go to Setup Live View ConfigUser Defined Links For more information about I/O ports, see I/O Ports onGuard Tour Preset PositionsPTZ Pan Tilt Zoom AdvancedOperator Same as administrator but with lower priority Control QueueMotion Detection DetectorsCamera Tampering Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersAudio Detection Go to Detectors Audio DetectionApplications Install ApplicationGo to Setup Applications Application LicensesAxis P3384-V Fixed Dome Network Camera Triggers Set Up Action RulesEvents Go to Events Action Rules and click AddStorage Input SignalHardware SystemRecipient Types Add RecipientsActions PTZ ControlCreate Schedules Set Up Email RecipientsRecipient Use with action Go to Events Schedules and click Add Set Up RecurrencesGo to Events Recurrences and click Add Play Recording RecordingsFind Recordings Go to Recordings ListExport Video Clip Recording ListContinuous Recording Go to Recordings ContinuousLanguages Users System OptionsSecurity IP Address FilterCertificates IeeeCA Certificate Date & Time Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate CertificatesBasic TCP/IP Settings NetworkLinux/Unix example Axis Internet Dynamic DNS ServiceLinux/Unix syntax Axis Video Hosting System AvhsNTP Configuration Advanced TCP/IP SettingsDNS Configuration Host Name ConfigurationHttps NAT traversal port mapping for IPv4QoS Quality of Service SocksRTP/H.264 StorageUPnPTM BonjourFormat SD Card Network ShareMount and Unmount SD Card To add a network sharePorts MaintenancePorts & Devices Port StatusSystem Overview SupportSupport Overview Logs & ReportsPlain Config Reset to Factory Default SettingsFile Upload Firmware To upgrade the product’s firmware TroubleshootingUpgrade the Firmware Check the FirmwareProblems setting the IP address Emergency Recovery ProcedureSymptoms, Possible Causes and Remedial Actions Product cannot be accessed from a browserProblems with streaming H.264 Product is accessible locally but not externallyBasic Setup Video & Audio Camera Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general SettingsVideo cannot be recorded Technical Specifications Maintenance Function/group Specifications Network SecurityInstallation SupportedConnectors Function/group Specifications General CasingPower DimensionsConnectors Function Pin SpecificationsAudio Input Performance ConsiderationsAudio Output M2.13