Axis Communications P3384-V user manual Detectors, Camera Tampering, Motion Detection

Page 30

AXIS P3384–V Fixed Dome Network Camera

Detectors

Detectors

Camera Tampering

Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severely defocused. To send an alarm, for example an email, an action rule must be set up.

To configure tampering:

1.Go to Detectors > Camera Tampering.

2.Set the Minimum duration, that is, the time that must elapse before an alarm is generated. Increase time to prevent false alarms for known conditions that affect the image.

3.Select Alarm for dark images if an alarm should be generated if lights are dimmed or turned off, or if the lens is sprayed, covered, or rendered severely out of focus.

4.Click Save.

To configure the product to send an alarm when tampering occurs:

1.Go to Events > Action Rules.

2.Click Add to set up a new action rule.

3.Enter a Name for the action rule.

4.Under Condition, select Detectors from the Trigger list.

5.Select Tampering from the list of detectors.

6.Optionally, select a schedule and set additional conditions.

7.Select the action. To send an email, select Send Notification and select a Recipient from the list of defined recipients.

Note

The While the rule is active option under Duration cannot be used with camera tampering, since camera tampering does not have a duration and once it has been triggered it will not automatically return to its untriggered state.

For more information on actions rules, see Events on page 35.

Motion Detection

Motion detection is used to generate an alarm whenever movement starts or stops in the camera view.

Motion detection is configured by defining up to 10 Include and Exclude windows:

Include windows — define areas where motion should be detected

Exclude windows — define areas within an Include window that should be ignored (areas outside Include windows are automatically ignored).

For instructions, see Set Up Motion Detection Windows on page 31.

To control the number of motion detection alarms, the parameters Object Size, History and Sensitivity can be adjusted. See Motion Detection Parameters on page 31.

Once motion detection windows are configured, the Axis product can be configured to perform actions when motion is detected. Possible actions include uploading images and start recording. For more information, see Set Up Action Rules on page 35.

30

Image 30
Contents Axis P3384-V Fixed Dome Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis P3384-V Fixed Dome Network CameraReset to Factory Default Settings Connectors Performance ConsiderationsConnector Connectors and ButtonsNetwork Connector Hardware OverviewSD Card Slot LED IndicatorsAudio Connector Control ButtonAccess from the Internet Access the ProductAccess from a Browser Set the Root PasswordControls on the Live View Set Power Line FrequencyLive View Click Use HttpsManual Trigger Go to Setup EventsAxis Media Control viewer toolbar To show the manual trigger buttons in the Live ViewPTZ Controls AMC Audio ControlsAxis P3384-V Fixed Dome Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingSet Up the Product Basic SetupVideo Stream Click Save to apply the new settingsVideo and Audio ImageStream Profiles MjpegImage Appearance Camera SettingsLightfinder Mode White BalanceShutter & Gain Exposure SettingsIris adjustment Set Shutter toOverlay Select an Aspect ratio and a Video stream resolutionView Area Go to Video & Audio View AreaPrivacy Mask Overlay ImageGo to Video & Audio Overlay Image Focus & Zoom Audio SettingsWhen satisfied, click Enable iris to enable the iris Audio ModesAudio Input Audio OutputAudio Clips Viewer Settings Configure the Live ViewDefault Viewer for Browsers Browser Viewer DescriptionOutput Buttons Go to Setup Live View ConfigUser Defined Links For more information about I/O ports, see I/O Ports onGuard Tour Preset PositionsPTZ Pan Tilt Zoom AdvancedOperator Same as administrator but with lower priority Control QueueMotion Detection DetectorsCamera Tampering Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersAudio Detection Go to Detectors Audio DetectionApplications Install ApplicationGo to Setup Applications Application LicensesAxis P3384-V Fixed Dome Network Camera Triggers Set Up Action RulesEvents Go to Events Action Rules and click AddStorage Input SignalHardware SystemRecipient Types Add RecipientsActions PTZ ControlSet Up Email Recipients Create SchedulesRecipient Use with action Set Up Recurrences Go to Events Schedules and click AddGo to Events Recurrences and click Add Play Recording RecordingsFind Recordings Go to Recordings ListExport Video Clip Recording ListContinuous Recording Go to Recordings ContinuousLanguages Users System OptionsSecurity IP Address FilterIeee CertificatesCA Certificate Date & Time Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate CertificatesBasic TCP/IP Settings NetworkLinux/Unix example Axis Internet Dynamic DNS ServiceLinux/Unix syntax Axis Video Hosting System AvhsNTP Configuration Advanced TCP/IP SettingsDNS Configuration Host Name ConfigurationHttps NAT traversal port mapping for IPv4QoS Quality of Service SocksRTP/H.264 StorageUPnPTM BonjourFormat SD Card Network ShareMount and Unmount SD Card To add a network sharePorts MaintenancePorts & Devices Port StatusSystem Overview SupportSupport Overview Logs & ReportsReset to Factory Default Settings Plain ConfigFile Upload Firmware To upgrade the product’s firmware TroubleshootingUpgrade the Firmware Check the FirmwareProblems setting the IP address Emergency Recovery ProcedureSymptoms, Possible Causes and Remedial Actions Product cannot be accessed from a browserProduct is accessible locally but not externally Problems with streaming H.264Basic Setup Video & Audio Camera Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general SettingsVideo cannot be recorded Technical Specifications Maintenance Function/group Specifications Network SecurityInstallation SupportedConnectors Function/group Specifications General CasingPower DimensionsConnectors Function Pin SpecificationsPerformance Considerations Audio InputAudio Output M2.13