Axis Communications M5013 user manual Events

Page 26

AXIS M5013 PTZ Dome Network Camera

Events

Events

The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.

Available Action Rule triggers and conditions include:

•Applications — use installed applications to trigger the rule, see Applications, on page 25.

•Detectors

-Audio Detection — trigger the rule when audio is detected, see Audio detection, on page 24.

-Motion Detection — trigger the rule when motion is detected, see Motion Detection, on page 23.

•Hardware

-Network — trigger the rule if network connection is lost or restored. This can for example be used to start recording to the SD card.

-Temperature — trigger the rule if the temperature falls outside or inside the operating range of the product. This can for example be used to send maintenance notifications.

•Input Signal

-Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see Controls on the Live View page, on page 9 . This can for example be used to validate actions during product installation and configuration.

•PTZ

-Moving — trigger the rule when the camera view moves due to a PTZ operation. This can for example be used as an additional condition to prevent an action rule triggered by motion detection to record video while the camera view moves due to a PTZ operation.

-Preset Reached — trigger the rule when the camera stops at a preset position. This can be for example be used with the Send Images action to upload images from the preset position.

•Storage

-Available — trigger the rule when the storage device is unmounted or removed. This can for example be used to send maintenance notifications.

-Full — trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be overwritten to prevent the storage device from becoming full.

-Locked — trigger the rule if the storage device is locked (write protected).

•System

-System Initializing — trigger the rule when the product is being started. This can for example be used to send a notification when the product restarts.

•Time

-Recurrence — trigger the rule periodically, see Recurrences, on page 28. This can for example be used to upload an image every 5 minutes.

-Use Schedule — trigger the rule according to the selected schedule, see Schedules, on page 28.

Available actions include:

•PTZ Control

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Axis M5013 PTZ Dome Network Camera Intellectual Property Rights About this documentLiability Equipment ModificationsTable of Contents Axis M5013 PTZ Dome Network CameraHardware overview ConnectorsHardware overview Color Indication LED indicatorsMaintenance Access from a browser Accessing the productAccessing the product Network TCP/IP Advanced Access from the InternetSet the root password Click Create self-signed certificateSet Power Line Frequency Live ViewPTZ Controls Controls on the Live ViewAxis Media Control viewer toolbar AMC Audio controlsAxis M5013 PTZ Dome Network Camera Media streams How to stream H.264Media streams Axis Media Control AMCAlternative methods of accessing the video stream Accessing audio streams Basic Setup Setting up the productSetting up the product Video Stream Video and AudioVideo and Audio Pixel CounterImage Camera SettingsStream Profiles 264Audio Settings OverlayG711 G726 Live View Config Default viewer for browsersLive View Config Browser Viewer DescriptionViewer Settings User Defined LinksPTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom Osdi ZonesLimits AdvancedControl Queue ControlsDetectors Set up motion detectionDetectors Motion DetectionAudio detection Applications ApplicationsEvents EventsGo to Events Action Rules and click Add Setting Up an Action RuleConvert Event Types to Action Rules Recurrences RecipientsSchedules Axis M5013 PTZ Dome Network Camera Recording List RecordingsRecordings Continuous recordingAxis M5013 PTZ Dome Network Camera Security System OptionsSystem Options UsersAudio Support Date & TimeIeee IPv4 Address Configuration Basic TCP/IP SettingsNetwork IPv6 Address ConfigurationAdvanced TCP/IP Settings Link-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailRTP/H.264 StorageUPnPTM BonjourGo to System Options Storage Click Network Share MaintenanceNetwork Share System Overview SupportSupport Overview Logs & ReportsPlain Config Reset to factory default settingsFile Upload Emergency recovery procedure TroubleshootingTroubleshooting Checking the firmwareProduct cannot be accessed from a browser Symptoms, possible causes and remedial actionsProblems setting the IP address Product is accessible locally but not externally Problems with the H.264 formatProblems uploading files Video and image problems, generalSetup Video & Audio Camera Settings No images displayed on webStorage and disk management problems Technical Specifications Technical SpecificationsMaintenance General Casing Alarm triggersInstallation PowerPerformance considerations M3.3
Top Page Image Contents