Axis Communications M5013 user manual QoS Quality of Service, Smtp email

Page 37

AXIS M5013 PTZ Dome Network Camera

System Options

Note

This FTP server has nothing to do with the product’s ability to transfer images via FTP to other locations and servers.

RTSP

The RTSP server running in the Axis product allows a connecting client to start an H.264 stream. The RTSP port number can be changed under System Options > Network > TCP/IP > Advanced. The default port is 554.

Note

H.264 video streams will not be available if the RTSP server is disabled.

SOCKS

SOCKS is a networking proxy protocol. The Axis product can be configured to use a SOCKS server to reach networks on the other side of a firewall or proxy server. This functionality is useful if the Axis product is located on a local network behind a firewall, and notifications, uploads, alarms, etc need to be send to a destination outside the local network (for example the Internet).

SOCKS is configured under System Options > Network > SOCKS. For more information, see the online help .

QoS (Quality of Service)

QoS (Quality of Service) guarantees a certain level of a specified resource to selected traffic on a network. A QoS-aware network prioritizes network traffic and provides a greater network reliability by controlling the amount of bandwidth an application may use.

The QoS settings are configured under System Options > Network > QoS. Using DSCP (Differentiated Services Codepoint) values, the Axis product can mark the following types of traffic: live video, live audio, event/alarm traffic and management traffic.

Note

Live audio DSCP will be equal to live video DSCP if H.264 over RTSP is used.

SMTP (email)

To send email messages from the Axis product via SMTP (Simple Mail Transfer Protocol), an SMTP mail server must be set up. This is done under System Options > Network > SMTP (email).

Enter the host names or IP addresses and port numbers for the primary and secondary mail servers in the fields provided. A From email address is also required. If the mail server requires authentication, check Use authentication to log in to this server and enter the necessary information.

SNMP

The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is the group of devices and management station running SNMP. Community names are used to identify groups.

The Axis product can be configured to support SNMP on the System Options > Network > SNMP page.

Depending on the level of security required, select the version on SNMP to use.

SNMP v1/v2 provides the lowest level of security. The community name can be specified as a password for read or read/write access to all supported SNMP devices. The default password for the Read community is public and the default password for the Write community is write.

Note

If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled.

Traps for SNMP v1/v2 are used by the Axis product to send messages to a management system on important events and status changes. Check Enable traps and enter the IP address where the trap message should be sent and the Trap community that should receive the message.

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Axis M5013 PTZ Dome Network Camera Liability About this documentIntellectual Property Rights Equipment ModificationsAxis M5013 PTZ Dome Network Camera Table of ContentsHardware overview ConnectorsHardware overview Maintenance LED indicatorsColor Indication Accessing the product Accessing the productAccess from a browser Set the root password Access from the InternetNetwork TCP/IP Advanced Click Create self-signed certificateLive View Set Power Line FrequencyAxis Media Control viewer toolbar Controls on the Live ViewPTZ Controls AMC Audio controlsAxis M5013 PTZ Dome Network Camera Media streams How to stream H.264Media streams Axis Media Control AMCAlternative methods of accessing the video stream Accessing audio streams Setting up the product Setting up the productBasic Setup Video and Audio Video and AudioVideo Stream Pixel CounterStream Profiles Camera SettingsImage 264Overlay Audio SettingsG711 G726 Live View Config Default viewer for browsersLive View Config Browser Viewer DescriptionUser Defined Links Viewer SettingsPTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom Osdi ZonesControl Queue AdvancedLimits ControlsDetectors Set up motion detectionDetectors Motion DetectionAudio detection Applications ApplicationsEvents EventsConvert Event Types to Action Rules Setting Up an Action RuleGo to Events Action Rules and click Add Schedules RecipientsRecurrences Axis M5013 PTZ Dome Network Camera Recordings RecordingsRecording List Continuous recordingAxis M5013 PTZ Dome Network Camera System Options System OptionsSecurity UsersIeee Date & TimeAudio Support Network Basic TCP/IP SettingsIPv4 Address Configuration IPv6 Address ConfigurationAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourNetwork Share MaintenanceGo to System Options Storage Click Network Share Support Overview SupportSystem Overview Logs & ReportsFile Upload Reset to factory default settingsPlain Config Troubleshooting TroubleshootingEmergency recovery procedure Checking the firmwareProblems setting the IP address Symptoms, possible causes and remedial actionsProduct cannot be accessed from a browser Problems with the H.264 format Product is accessible locally but not externallySetup Video & Audio Camera Settings Video and image problems, generalProblems uploading files No images displayed on webStorage and disk management problems Technical Specifications Technical SpecificationsInstallation Alarm triggersMaintenance General Casing PowerPerformance considerations M3.3
Top Page Image Contents