Axis Communications M5013 Network, Basic TCP/IP Settings, IPv4 Address Configuration, ARP/Ping

Page 34

AXIS M5013 PTZ Dome Network Camera

System Options

To change the date and time settings, select the preferred Time mode under New Server Time:

•Synchronize with computer time sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically.

•Synchronize with NTP Server obtains date and time from an NTP server. With this option, date and time settings are updated continuously. For information on NTP settings, see NTP Configuration, on page 35.

If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration, on page 35.

•Set manually allows you to manually set date and time.

If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving time changes.

The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the

predefined formats or see File Naming & Date/Time Formats in the online help for information on how to create custom date and time formats. To include date and time in the overlay text, go to Video & Audio and select Include date and Include time.

Network

Basic TCP/IP Settings

The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one version must always be enabled.

IPv4 Address Configuration

By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are configured under System Options > Network > TCP/IP > Basic.

DHCP (Dynamic Host Configuration Protocol) allows network administrators to centrally manage and automate the assignment of IP addresses. DHCP should only be enabled if using dynamic IP address notification, or if the DHCP can update a DNS server. It is then possible to access the Axis product by name (host name).

If DHCP is enabled and the product cannot be accessed, run AXIS IP Utility to search the network for connected Axis products, or reset the product to the factory default settings (see page 41) and then perform the installation again.

To use a static IP address, check Use the following IP address and specify the IP address, subnet mask and default router.

IPv6 Address Configuration

If IPv6 (IP version 6) is enabled, the Axis product will receive an IP address according to the configuration in the network router.

To enable IPv6, go to System Options > Network > TCP/IP > Basic. Other settings for IPv6 should be configured in the network router.

ARP/Ping

The IP address can be set using ARP and Ping. For instructions, see the product’s Installation Guide.

ARP/Ping is enabled by default. To disable, uncheck the box under System Options > Network > TCP/IP > Basic.

The ARP/Ping service is automatically disabled two minutes after the product is started, or as soon as an IP address is set. To reset the IP address, the product must be restarted to activate ARP/Ping for an additional two minutes.

Pinging the product is still possible when this service is disabled.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Axis M5013 PTZ Dome Network Camera Intellectual Property Rights About this documentLiability Equipment ModificationsTable of Contents Axis M5013 PTZ Dome Network CameraHardware overview ConnectorsHardware overview Maintenance LED indicatorsColor Indication Accessing the product Accessing the productAccess from a browser Network TCP/IP Advanced Access from the InternetSet the root password Click Create self-signed certificateSet Power Line Frequency Live ViewPTZ Controls Controls on the Live ViewAxis Media Control viewer toolbar AMC Audio controlsAxis M5013 PTZ Dome Network Camera Media streams How to stream H.264Media streams Axis Media Control AMCAlternative methods of accessing the video stream Accessing audio streams Setting up the product Setting up the productBasic Setup Video Stream Video and AudioVideo and Audio Pixel CounterImage Camera SettingsStream Profiles 264Audio Settings OverlayG711 G726 Live View Config Default viewer for browsersLive View Config Browser Viewer DescriptionViewer Settings User Defined LinksPTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom Osdi ZonesLimits AdvancedControl Queue ControlsDetectors Set up motion detectionDetectors Motion DetectionAudio detection Applications ApplicationsEvents EventsConvert Event Types to Action Rules Setting Up an Action RuleGo to Events Action Rules and click Add Schedules RecipientsRecurrences Axis M5013 PTZ Dome Network Camera Recording List RecordingsRecordings Continuous recordingAxis M5013 PTZ Dome Network Camera Security System OptionsSystem Options UsersIeee Date & TimeAudio Support IPv4 Address Configuration Basic TCP/IP SettingsNetwork IPv6 Address ConfigurationAdvanced TCP/IP Settings Link-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailRTP/H.264 StorageUPnPTM BonjourNetwork Share MaintenanceGo to System Options Storage Click Network Share System Overview SupportSupport Overview Logs & ReportsFile Upload Reset to factory default settingsPlain Config Emergency recovery procedure TroubleshootingTroubleshooting Checking the firmwareProblems setting the IP address Symptoms, possible causes and remedial actionsProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with the H.264 formatProblems uploading files Video and image problems, generalSetup Video & Audio Camera Settings No images displayed on webStorage and disk management problems Technical Specifications Technical SpecificationsMaintenance General Casing Alarm triggersInstallation PowerPerformance considerations M3.3
Top Page Image Contents