Axis Communications M5013 user manual Live View, Set Power Line Frequency

Page 8

AXIS M5013 PTZ Dome Network Camera

Accessing the product

Note

•The default administrator user name root is permanent and cannot be deleted.

•If the password for root is lost, the product must be reset to the factory default settings. See Reset to factory default settings, on page 41.

Set Power Line Frequency

Power line frequency is set the ﬁrst time the Axis product is accessed and can only be changed from Plain Conﬁg or by resetting the product to factory default.

Select the power line frequency (50 Hz or 60 Hz) used at the location of the Axis product. Selecting the wrong frequency may cause image ﬂicker if the product is used in ﬂuorescent light environments.

When using 50 Hz, the maximum frame rate is limited to 25 fps.

Note

Power line frequency is different in different geographic regions. In the Americas, 60 Hz is usually used; most other parts of the world use 50 Hz. Local variations may apply, always check with the local authorities.

The Live View page

If the Axis product has been customized to meet speciﬁc requirements, not all the items described below will appear in the Live View page. The following provides an overview of each available button.

8

Image 8

Contents Axis M5013 PTZ Dome Network Camera About this document LiabilityIntellectual Property Rights Equipment ModiﬁcationsTable of Contents Axis M5013 PTZ Dome Network CameraHardware overview ConnectorsHardware overview Color Indication LED indicatorsMaintenance Access from a browser Accessing the productAccessing the product Access from the Internet Set the root passwordNetwork TCP/IP Advanced Click Create self-signed certiﬁcateSet Power Line Frequency Live ViewControls on the Live View Axis Media Control viewer toolbarPTZ Controls AMC Audio controlsAxis M5013 PTZ Dome Network Camera How to stream H.264 Media streamsMedia streams Axis Media Control AMCAlternative methods of accessing the video stream Accessing audio streams Basic Setup Setting up the productSetting up the product Video and Audio Video and AudioVideo Stream Pixel CounterCamera Settings Stream ProﬁlesImage 264Audio Settings OverlayG711 G726 Default viewer for browsers Live View ConﬁgLive View Conﬁg Browser Viewer DescriptionViewer Settings User Deﬁned LinksPreset Positions PTZ Pan Tilt ZoomPTZ Pan Tilt Zoom Osdi ZonesAdvanced Control QueueLimits ControlsSet up motion detection DetectorsDetectors Motion DetectionAudio detection Applications ApplicationsEvents EventsGo to Events Action Rules and click Add Setting Up an Action RuleConvert Event Types to Action Rules Recurrences RecipientsSchedules Axis M5013 PTZ Dome Network Camera Recordings RecordingsRecording List Continuous recordingAxis M5013 PTZ Dome Network Camera System Options System OptionsSecurity UsersAudio Support Date & TimeIeee Basic TCP/IP Settings NetworkIPv4 Address Conﬁguration IPv6 Address ConﬁgurationAdvanced TCP/IP Settings Link-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailStorage UPnPTMRTP/H.264 BonjourGo to System Options Storage Click Network Share MaintenanceNetwork Share Support Support OverviewSystem Overview Logs & ReportsPlain Conﬁg Reset to factory default settingsFile Upload Troubleshooting TroubleshootingEmergency recovery procedure Checking the ﬁrmwareProduct cannot be accessed from a browser Symptoms, possible causes and remedial actionsProblems setting the IP address Product is accessible locally but not externally Problems with the H.264 formatVideo and image problems, general Setup Video & Audio Camera SettingsProblems uploading ﬁles No images displayed on webStorage and disk management problems Technical Speciﬁcations Technical SpeciﬁcationsAlarm triggers InstallationMaintenance General Casing PowerPerformance considerations M3.3