AXIS M3114-R Network Camera
Events
Events
The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include:
•Applications — use installed applications to trigger the rule, see Applications, on page 27.
•Detectors
-Motion Detection — trigger the rule when motion is detected, see Motion Detection, on page 24.
-Tampering — trigger the rule when tampering is detected, see Camera Tampering, on page 24.
•Hardware
-Network — trigger the rule if network connection is lost or restored.
•Input Signal
-Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see Controls on the Live View Page, on page 8 . This can for example be used to validate actions during product installation and configuration.
•PTZ
•Storage
-Available — trigger the rule when the storage device is unmounted or removed. This can for example be used to send maintenance notifications.
-Full — trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be overwritten to prevent the storage device from becoming full.
-Locked — trigger the rule if the storage device is locked (write protected).
•System
-System Initializing — trigger the rule when the product is being started. This can for example be used to send a notification when the product restarts.
•Time
-Recurrence — trigger the rule periodically, see Recurrences, on page 30. This can for example be used to upload an image every 5 minutes.
-Use Schedule — trigger the rule according to the selected schedule, see Schedules, on page 30.
Available actions include:
•PTZ Control
-Preset Position — go to a preset position.
-Guard Tour — start a guard tour, see Guard Tour, on page 22.
•Record Video — record video to a selected storage.
•Send Images — send images to a recipient.
•Send Notifications — send a notification message to a recipient.
28