Axis Communications M3114-R user manual QoS Quality of Service, Smtp email

Page 38

AXIS M3114-R Network Camera

System Options

Note

H.264 video streams will not be available if the RTSP server is disabled.

SOCKS

SOCKS is a networking proxy protocol. The Axis product can be configured to use a SOCKS server to reach networks on the other side of a firewall or proxy server. This functionality is useful if the Axis product is located on a local network behind a firewall, and notifications, uploads, alarms, etc need to be sent to a destination outside the local network (for example the Internet).

SOCKS is configured under System Options > Network > SOCKS. For more information, see the online help .

QoS (Quality of Service)

QoS (Quality of Service) guarantees a certain level of a specified resource to selected traffic on a network. A QoS-aware network prioritizes network traffic and provides a greater network reliability by controlling the amount of bandwidth an application may use.

The QoS settings are configured under System Options > Network > QoS. Using DSCP (Differentiated Services Codepoint) values, the Axis product can mark the following types of traffic: live video, event/alarm traffic and management traffic.

SMTP (email)

To send email messages from the Axis product via SMTP (Simple Mail Transfer Protocol), an SMTP mail server must be set up. This is done under System Options > Network > SMTP (email).

Enter the host names or IP addresses and port numbers for the primary and secondary mail servers in the fields provided. A From email address is also required. If the mail server requires authentication, check Use authentication to log in to this server and enter the necessary information.

SNMP

The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is the group of devices and management station running SNMP. Community names are used to identify groups.

The Axis product can be configured to support SNMP on the System Options > Network > SNMP page.

Depending on the level of security required, select the version on SNMP to use.

SNMP v1/v2 provides the lowest level of security. The community name can be specified as a password for read or read/write access to all supported SNMP devices. The default password for the Read community is public and the default password for the Write community is write.

Note

If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled.

Traps for SNMP v1/v2 are used by the Axis product to send messages to a management system on important events and status changes. Check Enable traps and enter the IP address where the trap message should be sent and the Trap community that should receive the message.

The following traps are available:

Cold start

Warm start

Link up

Authentication failed

SNMP v3 provides encryption and secure passwords. To use traps with SNMP v3, an SNMP v3 management application is required.

38

Image 38
Contents Axis M3114-R Network Camera Intellectual Property Rights About this documentLiability Equipment ModificationsTable of Contents Axis M3114-R Network CameraHardware Overview ConnectorsHardware Overview LED Indicators Color IndicationAccess from a Browser Accessing the ProductAccessing the Product Network TCP/IP Advanced Accessing the Product Access from the InternetSet the Root Password Click Create self-signed certificateControls on the Live View Set Power Line FrequencyLive View Axis Media Control viewer toolbar PTZ ControlsAxis M3114-R Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis M3114-R Network Camera Basic Setup Setting Up the ProductSetting Up the Product Video Stream VideoVideo Pixel Counter264 Stream ProfilesImage Image Appearance Camera SettingsExposure Settings White BalanceOverlay Image Video View AreaOverlay Go to Video Video Stream and select the Image tabPrivacy Mask Go to Video Overlay ImageDefault Viewer for Browsers Live View ConfigLive View Config Browser Viewer Description Viewer SettingsUser Defined Links PTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom Guard TourAdvanced ControlsCamera Tampering DetectorsDetectors Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersRecommended values Default valuesLow level 0% Applications ApplicationsEvents EventsRecipients Setting Up an Action RuleConvert Event Types to Action Rules Go to Events Action Rules and click AddSchedules RecurrencesAxis M3114-R Network Camera Recording List RecordingsRecordings Continuous RecordingSecurity System OptionsSystem Options UsersCertificates Date & TimeIeee Basic TCP/IP Settings NetworkAdvanced TCP/IP Settings Http NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailRTP/H.264 StorageUPnPTM BonjourSupport Overview System Options MaintenanceSupport System OverviewScripting Reset to Factory Default SettingsPlain Config File UploadEmergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Basic Product is accessible locally but not externallyProblems with streaming H.264 Video Camera Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Key framesTechnical Specifications Technical SpecificationsMemory Power Function/group Specifications System ApplicationMaintenance Installation aids ConnectorsPerformance Considerations Function/group Specifications IncludedAccessories License Video M2.2