Axis Communications M3114-R user manual Advanced TCP/IP Settings

Page 36

AXIS M3114-R Network Camera

System Options

Always - The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered the product will stay connected to the service. This option can be used when the product is already installed and it is not convenient to use the one-click installation.

AXIS Internet Dynamic DNS Service

AXIS Internet Dynamic DNS Service assigns a host name for easy access to the product. For more information, see www.axiscam.net

To register the Axis product with AXIS Internet Dynamic DNS Service, go to System Options > Network > TCP/IP > Basic. Under Services, click the AXIS Internet Dynamic DNS Service Settings button (requires access to the Internet). The domain name currently registered at AXIS Internet Dynamic DNS service for the product can at any time be removed.

Advanced TCP/IP Settings

DNS Configuration

DNS (Domain Name Service) provides the translation of host names to IP addresses. The DNS settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain DNS server address via DHCP to use the DNS settings provided by the DHCP server.

To make manual settings, select Use the following DNS server address and specify the following:

Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the first part of a fully qualified domain name, for example, myserver is the host name in the fully qualified domain name myserver.mycompany.com where mycompany.com is the domain name.

Primary/Secondary DNS server - Enter the IP addresses of the primary and secondary DNS servers. The secondary DNS server is optional and will be used if the primary is unavailable.

NTP Configuration

NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain NTP server address via DHCP to use the NTP settings provided by the DHCP server.

To make manual settings, select Use the following NTP server address and enter the host name or IP address of the NTP server.

Host Name Configuration

The Axis product can be accessed using a host name instead of an IP address. The host name is usually the same as the assigned DNS name. The host name is configured under System Options > Network > TCP/IP > Advanced.

Select Obtain host name via IPv4 DHCP to use host name provided by the DHCP server running on IPv4.

Select Use the host name to set the host name manually.

Select Enable dynamic DNS updates to dynamically update local DNS servers whenever the Axis product’s IP address changes.

For more information, see the online help .

Link-Local IPv4 Address

Link-Local Address is enabled by default and assigns the Axis product an additional IP address which can be used to access the product from other hosts on the same segment on the local network. The product can have a Link-Local IP and a static or DHCP-supplied IP address at the same time.

This function can be disabled under System Options > Network > TCP/IP > Advanced.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Axis M3114-R Network Camera About this document LiabilityIntellectual Property Rights Equipment ModificationsTable of Contents Axis M3114-R Network CameraConnectors Hardware OverviewHardware Overview LED Indicators Color IndicationAccessing the Product Accessing the ProductAccess from a Browser Accessing the Product Access from the Internet Set the Root PasswordNetwork TCP/IP Advanced Click Create self-signed certificateSet Power Line Frequency Live ViewControls on the Live View Axis Media Control viewer toolbar PTZ ControlsAxis M3114-R Network Camera How to Stream H.264 Media StreamsMedia Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis M3114-R Network Camera Setting Up the Product Setting Up the ProductBasic Setup Video VideoVideo Stream Pixel CounterStream Profiles Image264 Camera Settings Exposure SettingsImage Appearance White BalanceVideo View Area OverlayOverlay Image Go to Video Video Stream and select the Image tabPrivacy Mask Go to Video Overlay ImageLive View Config Live View ConfigDefault Viewer for Browsers Viewer Settings User Defined LinksBrowser Viewer Description Preset Positions PTZ Pan Tilt ZoomPTZ Pan Tilt Zoom Guard TourAdvanced ControlsDetectors DetectorsCamera Tampering Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersDefault values Low level 0%Recommended values Applications ApplicationsEvents EventsSetting Up an Action Rule Convert Event Types to Action RulesRecipients Go to Events Action Rules and click AddSchedules RecurrencesAxis M3114-R Network Camera Recordings RecordingsRecording List Continuous RecordingSystem Options System OptionsSecurity UsersDate & Time IeeeCertificates Basic TCP/IP Settings NetworkAdvanced TCP/IP Settings Http NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailStorage UPnPTMRTP/H.264 BonjourSystem Options Maintenance SupportSupport Overview System OverviewReset to Factory Default Settings Plain ConfigScripting File UploadTroubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with streaming H.264Basic Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalVideo Camera Settings Key framesTechnical Specifications Technical SpecificationsFunction/group Specifications System Application Maintenance Installation aidsMemory Power ConnectorsFunction/group Specifications Included Accessories License VideoPerformance Considerations M2.2
Top Page Image Contents