Axis Communications M3114-R user manual LED Indicators, Color Indication

Page 5

AXIS M3114-R Network Camera

Hardware Overview

Network connector - D-coded M12 connector. Supports Power over Ethernet (PoE).

NOTICE

The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network switch shall be shielded (STP) and intended for their specific use. Make sure that the network switch is properly grounded. See for regulatory requirements.

Control button - The control button is used for:

•Connecting to an AXIS Video Hosting System service. See page 35. To connect, press and hold the button for about 1 second until the Status LED flashes green.

•Connecting to AXIS Internet Dynamic DNS Service. See page 36. To connect, press and hold the button for about 3 seconds.

•Resetting the product to factory default settings. See page 41.

LED Indicators

LED	Color	Indication

Network	Green	Steady for connection to a 100 MBit/s network. Flashes for network activity.

	Amber	Steady for connection to a 10 MBit/s network. Flashes for network activity.

	Unlit	No network connection.

Status	Green	Steady green for normal operation.

	Amber	Steady during startup and when restoring settings.

	Red	Slow flash for failed upgrade.

Power	Green	Normal operation.

	Amber	Flashes green/amber during firmware upgrade.

Note

•The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.

•The Status LED can be configured to flash while an event is active.

•The Status LED can be configured to flash for identifying the unit. Go to Setup > System Options > Maintenance .

5

Image 5

Contents Axis M3114-R Network Camera Liability About this document Intellectual Property Rights Equipment ModificationsAxis M3114-R Network Camera Table of ContentsHardware Overview ConnectorsHardware Overview Color Indication LED IndicatorsAccess from a Browser Accessing the ProductAccessing the Product Set the Root Password Accessing the Product Access from the InternetNetwork TCP/IP Advanced Click Create self-signed certificateControls on the Live View Set Power Line FrequencyLive View PTZ Controls Axis Media Control viewer toolbarAxis M3114-R Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis M3114-R Network Camera Basic Setup Setting Up the ProductSetting Up the Product Video VideoVideo Stream Pixel Counter264 Stream ProfilesImage Exposure Settings Camera SettingsImage Appearance White BalanceOverlay Video View AreaOverlay Image Go to Video Video Stream and select the Image tabGo to Video Overlay Image Privacy MaskDefault Viewer for Browsers Live View ConfigLive View Config Browser Viewer Description Viewer SettingsUser Defined Links PTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom Guard TourControls AdvancedDetectors DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsRecommended values Default valuesLow level 0% Applications ApplicationsEvents EventsConvert Event Types to Action Rules Setting Up an Action RuleRecipients Go to Events Action Rules and click AddRecurrences SchedulesAxis M3114-R Network Camera Recordings RecordingsRecording List Continuous RecordingSystem Options System OptionsSecurity UsersCertificates Date & TimeIeee Network Basic TCP/IP SettingsAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 HttpSmtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourSupport System Options MaintenanceSupport Overview System OverviewPlain Config Reset to Factory Default SettingsScripting File UploadTroubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Basic Product is accessible locally but not externallyProblems with streaming H.264 Video and image problems, general Status and Network indicator LEDs are flashing red rapidlyVideo Camera Settings Key framesTechnical Specifications Technical SpecificationsMaintenance Installation aids Function/group Specifications System ApplicationMemory Power ConnectorsPerformance Considerations Function/group Specifications IncludedAccessories License Video M2.2