Axis Communications M1011 Axis IP Utility single camera/small installation, Automatic discovery

AXIS IP Utility - single camera/small installation

AXIS IP Utility automatically discovers and displays Axis devices on your network. You can also manually set a static IP address

through this application. AXIS IP Utility is available on the Axis Network Video Product CD, or it can be downloaded from www.axis.com/techsup

Install the AXIS M10 Series Network Camera on the same network segment (physical subnet) as the computer running AXIS IP Utility.

Automatic discovery

1.Check that the AXIS M10 Series Network Camera is connected to the network and that power has been applied.

2.Start AXIS IP Utility.

3.When the AXIS M10 Series network camera appears in the window, double-click to open the camera’s home page.

4.See page 13 for instructions on how to set the password.

Set the IP address manually (optional)

1.Acquire an unused IP address on the same network segment your computer is connected to.

2.Select the AXIS M10 Series in the list.

3.Click the button Assign new IP address to selected device and enter the IP address.

4.Click the Assign button and follow on-screen instructions. Note that the camera must be restarted within two minutes for the new IP address to be set.

5.Click the Home Page button to access the camera’s web pages.

6.See page 13 for instructions on how to set the password.

ENGLISH