AXIS M10 Series | Page 15 |
Configure the wireless connection
AXIS
Note: For even greater security, use HTTPS. Once the camera has been connected to the wired network, go to Setup > System Options > Security > HTTPS and refer to the camera’s online help for instructions.
Status of Wireless Networks
Go to Setup > Basic Setup > Wireless in the camera’s internal web pages.
This list is the result of a network scan. The network the AXIS
•SSID - The name of a wireless network (or
•Mode - An Access Point (Master) or
•Security - Indicates the type of security the network uses. See below for the supported security types.
•Channel - Shows the wireless channel currently in use.
•Signal strength - Shows the signal strength.
•Bit rate - The current bit rate in Mbit/s. This is only shown for
the access point currently in use.
Note: Access points with a disabled SSID Broadcast will not appear unless the SSID is manually entered.