Page 8 | AXIS M10 Series |
Install the hardware
Important!
AXIS M10 Series is not approved for outdoor use - the product may be installed in indoor environments only.
Mount the camera
AXIS M10 Series is shipped with the base plate and a short extension tube mounted. Unscrew the extension tube to release the base plate from the cover plate. Depending on whether the camera is to be mounted on a wall or shelf, follow the appropriate instructions below.
Wall mounting
1.Using the supplied screws, fix the base plate to a flat (horizontal or vertical) surface.
2.Place the cover plate over the base plate; if needed attach the short extension tube, and/or one or more of the long extension tubes (AXIS M1054 only) provided.
3.Attach the camera, adjust the angle and tighten the lock ring.
4.Secure the cables once connected, with the cable tie that is attached to the cover plate.
Shelf mounting
1.Position the clamp and tighten the fixing screw securely.
2.Attach the camera’s lock ring to the clamp, adjust the camera’s angle and tighten the lock ring.
Wall mount |
| Base plate | |
Cable tie |
| ||
|
| ||
|
|
|
|
|
|
|
|
Lock ring Cover plate
Extension tube (optional)
Shelf mount
Clamp
Lock ring
Fixing screw