Axis Communications M1011-W Legal Considerations, Electromagnetic Compatibility EMC, Safety, RoHS

Page 2

Legal Considerations

Video and audio surveillance can be prohibited by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes.

These network cameras include one (1) H.264 decoder license; and (1) MPEG-4 decoder license (AXIS M1054 excepted). To purchase further licenses, contact your reseller.

Electromagnetic Compatibility (EMC)

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Re-orient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a different circuit to the receiver. Consult your dealer or an experienced radio/TV technician for help. Shielded (STP) network cables must be used with this unit to ensure compliance with EMC standards. See Radio Transmission Regulatory Information & EMC, on page 113 for more information on this product’s compliance with radio frequency and safety standards.

Safety

Complies to EN 60950-1 (IEC 60950-1), Safety of Information Technology Equipment.

Equipment Modifications

This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user-serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals.

Liability

Every care has been taken in the preparation of this document. Please inform your local Axis office of any inaccuracies or omissions. Axis Communications AB cannot be held responsible for any technical or typographical errors and

reserves the right to make changes to the product and documentation without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material.

RoHS

This product complies with both the European RoHS directive, 2002/95/EC, and the Chinese RoHS regulations,

ACPEIP.

WEEE Directive

The European Union has enacted a Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE Directive). This directive is applicable in the European Union member states.

The WEEE marking on this product (see right) or its documentation indicates that the product must not be disposed of together with household waste. To prevent possible harm to human health and/or the environment, the product must be disposed of in an approved and environmentally safe recycling process. For further information on how to dispose of this product correctly, contact the product supplier, or the local authority responsible for waste disposal in your area.

Business users should contact the product supplier for information on how to dispose of this product correctly. This product should not be mixed with other commercial waste. For more information, visit www.axis.com/techsup/.

Support

Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:

download user documentation and firmware updates

find answers to problems in the FAQ database. Search by product, category, phrases.

report problems to Axis support by logging in to your private support area.

Image 2 Contents
Installation Guide Electromagnetic Compatibility EMC SafetyLegal Considerations Equipment ModificationsPackage contents Axis M10 SeriesFront view Axis M1031-W/AXIS M1054 Axis M1011/-W Hardware overviewRear view all models Function Pin Unit connectorsTerminal connector Axis M1054 only Connect input/output devices to the camera as follows LED indicatorsConnector block to the terminal Connector on the camera Once the cables are connected, attachSensitivity range up to 5m 16ft Axis M1031-W and Axis M1054 onlyAxis M1031-W and Axis M1054 are equipped with the following Wall mounting Install the hardwareMount the camera Shelf mountingAssembly with extension tubes Connect the cablesAssign an IP address Method Recommended for Operating systemAutomatic discovery Axis IP Utility single camera/small installationSee page 13 for instructions on how to set the password Start Axis IP UtilityAssign IP button Assign an IP address in a single deviceSelect Axis M1011 in Axis Camera Management and click Click the OK buttonSet the password Click the Create self-signed certificate buttonEnter the password as set above, and click OK Configure the wireless connection Click Save Wireless SettingsSecurity select one of the following methods Identity Enter the user identity to present to the network Eapol version SelectComplete the wireless installation Installation for Axis M1011-W/M1031-W is now completeResetting to the Factory Default Settings Other methods of setting the IP addressFurther information Re-assign the IP address, using any one of the methodsAccessing the camera from the Internet Série Axis M10 Procédure d’installationConfiguration du mot de passe. Voir Contenu de l’emballage Élément Modèles/variantes/remarquesVue arrière tous les modèles Série Axis M10 Présentation du matérielVue avant Axis M1031-W/AXIS M1054 Axis M1011/-W Connecteurs de l’unité Connecteur pour terminaux E/S Axis M1054 uniquementFonction RemarquesFaire, cliquez sur Setup System Options LED Témoins DELAxis M1031-W et Axis M1054 uniquement Montage mural Installation du matérielMontage de la caméra Montage sur tabletteClip pour câble Joint pour tube Branchement des câblesAssemblage à l’aide des tubes dextension Tube dextension courtRemarques Méthode Recommandée pour Système DexploitationAttribution d’une adresse IP Détection automatique Axis IP Utility Une seule caméra/petites installationsConfiguration manuelle de l’adresse IP facultatif Détection automatique Cliquez sur OK Attribution d’une adresse IP à un seul périphériqueAdresse IP Attribution d’adresses IP à plusieurs périphériquesConfiguration du mot de passe Pour configurer Configuration de la connexion sans fil État des réseaux sans filParamètres sans fil Cliquez sur Save EnregistrerEAP-TLS Fin de l’installation sans fil Autres méthodes de définition de l’adresse IP Axis M1011-W/M1031-W l’installation est à présent terminéeRétablissement des paramètres dusine par défaut Accès à la caméra sur Internet Plus d’informationsPage Wichtig InstallationsschritteAxis M10 Serie Komponente SeiteLieferumfang Modell/Varianten/AnmerkungenVorderansicht Axis M1031-W/AXIS M1054 Axis M1011/-W Axis M10 SerieSeite HardwareübersichtRückansicht alle Modelle Geräteanschlüsse Anschluss nur Axis M1054Hinweise Axis M10 SerieFunktion LED-Anzeigen Farbe BedeutungInstallation der Hardware Nur Axis M1031-W und Axis M1054Regalmontage Wandhalterung Grund- platte Montieren der KameraWandmontage Regalmontage optionalKurzes Verlängerungsrohr Langes Verlängerungsrohr Anschließen der KabelGrundabdeckung Methode Empfohlen für Betriebssystem Zuweisen einer IP-AdresseHinweise Anderen Subnetz Windows VistaStarten Sie Axis IP Utility Axis IP Utility einzelne Kamera/kleine InstallationAutomatische Erkennung Manuelle Zuweisung der IP-Adresse optionalAxis Camera Management mehrere Kameras/große Installationen Klicken Sie auf OK Zuweisen einer IP-Adresse für ein einzelnes GerätZuweisen Zuweisen von IP-Adressen an mehrere GeräteFestlegen des Kennworts Axis M10 Serie WLAN-Verbindung konfigurieren Wireless Setup Basiskonfiguration DrahtlosHinweis Access Points mit deaktivierter Ssid Service Set Status von WLAN-NetzwerkenKlicken Sie auf Save Speichern Einstellungen für die WLAN-VerbindungSecurity Sicherheit Wählen Sie eine der folgenden Methoden EAP-TLS Schließen Sie die Installation des WLAN-Netzwerks ab Seite Andere Methoden zum Festlegen der IP-Adresse Axis M10 Serie SeiteWiederherstellen der werkseitigen Standardeinstellungen Trennen Sie die Kamera von der StromversorgungZugriff auf die Kamera über das Internet Weitere InformationenAssegnazione di un indirizzo IP a pagina Procedura di installazioneSerie Axis M10 ImportanteArticolo Modelli/varianti/note PaginaContenuto della confezione Axis M1011-W Panoramica dell’hardwareVista posteriore tutti i modelli Connettori dell’unità Morsettiera I/O solo Axis M1054Funzione Pin Colore Indicazione Indicatori LEDLED settings Impostazioni LED. Per ulteriori Installazione dell’hardware Solo Axis M1031-W e Axis M1054Montaggio su mensola Montaggio della telecameraMontaggio a parete Staffa per il montaggio a muroCollegamento dei cavi Assemblaggio con tubi di prolungaAssegnazione di un indirizzo IP Metodo Consigliato per Sistema operativoRilevamento automatico Axis IP Utility telecamera singola/piccole installazioniAxis IP Utility rileva Impostazione manuale dell’indirizzo IP facoltativoPagina Assegnazione di un indirizzo IP a un singolo dispositivo Fare clic sul pulsante OKAssegnazione degli indirizzi IP a più telecamere Impostazione della password Per configurare Ssid nome della rete wireless o della periferica ad hoc Configurazione della connessione wirelessStato delle reti wireless Impostazioni wireless Versione Eapol Completamento dell’installazione wireless Scollegare il cavo di rete dalla telecameraSerie Axis M10 Utilizzo Nel Sistema Ripristino delle impostazioni predefiniteAltri metodi di assegnazione dell’indirizzo IP VisualizzazioneAccesso alla telecamera da Internet Ulteriori informazioniPage Guía de instalación de la Serie Axis M10 Pasos para la instalaciónArtículo PáginaContenido del paquete Modelos/variantes/notasPresentación del hardware Vista posterior todos los modelosConectores de la unidad Conector de terminales de E/S sólo Axis M1054Función Pines Notas Indicadores LED Color IndicaciónSólo Axis M1031-W y Axis M1054 Instalación del hardware Importante Montaje de la cámaraMontaje con tubos de extensión Montaje en paredMontaje en estante Conexión de los cables Método Recomendado para Sistema operativo Asignación de una dirección IPNotas Página Diferente Windows VistaInicie Axis IP Utility Configuración manual de la dirección IP opcionalDetección automática Español Haga clic en el botón OK Aceptar Asignación de una dirección IP en un dispositivo individualEl botón Assign IP Asignar IP Asignación de direcciones IP en varios dispositivos Configuración de la contraseña Para configurar Axis M1011/AXIS M1054 la instalación ha finalizadoConfiguración de la conexión inalámbrica Estado de las redes inalámbricasAl punto de acceso en uso en ese momento Parámetros inalámbricos EAP-TLS Finalización de la instalación inalámbrica Desconecte el cable de red de la cámaraOtros métodos para configurar la dirección IP Restablecimiento de los valores inicialesAcceso a la cámara desde Internet Más informaciónAxis M1011/M1011-W/M1031-W/AXIS M1054 Axis M1011-W/M1031-W WirelessRadio Transmission Regulatory Information & EMC Printed March
Related manuals
Manual 51 pages 25.95 Kb Manual 61 pages 7.07 Kb