AXIS M10 Series |
| Page 19 |
| |
Other methods of setting the IP address |
| |||
|
|
|
|
|
| Use in | Notes |
|
|
| operating |
|
|
|
| system |
|
|
|
|
|
|
|
|
UPnP™ | Windows | When enabled on your computer, the camera |
|
|
| (ME or | is automatically detected and added to “My |
| ENGLISH |
| XP) | Network Places.” |
| |
|
|
| ||
|
|
|
|
|
Bonjour | MAC OSX | Applicable to browsers with support for |
|
|
| (10.4 or | Bonjour. Navigate to the Bonjour bookmark |
|
|
| later) | in your browser (e.g. Safari) and click on the |
|
|
|
| |||
|
| link to access the camera’s web pages. |
|
|
|
|
|
|
|
AXIS Dynamic | All | A free service from Axis that allows you to |
|
|
DNS Service |
| quickly and simply install your camera. |
|
|
|
| Requires an Internet connection with no HTTP |
|
|
|
| proxy. See www.axiscam.net for more |
|
|
|
| information. |
|
|
|
|
|
|
|
ARP/Ping | All | See user’s manual. The command must be |
|
|
|
| issued within 2 minutes of connecting power |
|
|
|
| to the camera. |
|
|
|
|
|
|
|
View DHCP server | All | To view the admin pages for the network |
|
|
admin pages |
| DHCP server, see the server’s documentation. |
|
|
|
|
|
|
|
Resetting to the Factory Default Settings
To reset all parameters and the IP address to Factory Default settings:
1.Disconnect power from the camera.
2.Press and hold the Control button and reconnect power.
3.Keep the Control button pressed until the Status indicator flashes amber (this may take up to 15 seconds).
4.Release the Control button. When the Status indicator displays green (which can take up to 1 minute) the process is complete and the camera has been reset.