AXIS M10 Series | Page 3 |
AXIS M10 Series Installation Guide
This guide helps you to install the AXIS M10 Series Network Camera on your network. For further information, please see the User’s Manual available on the CD, or from www.axis.com/techsup
Installation steps
1.Check the package contents against the list below.
2.Hardware overview on page 4.
3.Install the hardware on page 8.
4.Assign an IP address on page 10.
5.Set the password on page 13.
6.Configure the wireless connection on page 15.
(AXIS
Important!
This product must be used in compliance with local laws and regulations.
ENGLISH
Package contents
Item | Models/variants/notes |
|
|
Network Camera | AXIS M1011, AXIS |
| AXIS M1054 |
|
|
Indoor power | |
adaptor | Europe, UK, USA/Japan, Australia, Korea, Argentina, China |
(country specific) | *power adaptor extension cable 1.8m (5.9ft), |
|
|
Extension tube | • Attached short extension tube, 4 mounting screws/plugs |
| • 1 long extension tube, 1 cable clip, 1 tube joint (AXIS |
| M1054 only) |
|
|
Flexible clamp | For shelf mounting |
|
|
CD | AXIS Network Video Product CD, including product |
| documentation, installation tools and other software |
|
|
Printed Materials | AXIS M10 Series Installation Guide (this document) |
| Axis Warranty Document |
|
|