Axis Communications M1011-W, M1031-W, M1054 manual Complete the wireless installation

Complete the wireless installation

1.Check that the wireless settings in the camera correspond to the settings in the access point.

2.Disconnect the network cable from the camera.

3.Refresh the web page after 20-30 seconds to confirm the wireless connection. If the camera cannot be accessed, run AXIS IP Utility and select it from the list.

Notes:

•To establish communication, the wireless settings must be exactly the same in the camera as in the access point or ad-hoc device.

•Keys, passphrases and certificates that are used for security must be entered manually. Contact your Network Administrator for the requirements for the selected access point or ad-hoc device.

•Wireless settings must always (during installation and at all other times) be configured or changed in the camera first, before changing the settings in the wireless access point. This ensures that the camera is always accessible when making changes.

•SSID (Service Set Identifier) is sometimes written as ESSID (Extended Service Set Identifier).

The installation for AXIS M1011-W/M1031-W is now complete.