Page 6 | AXIS M10 Series |
Connect input/output devices to the camera as follows:
1. Attach the cables for the device securely to the supplied connector block.
2. Once the cables are connected, attach | I/O connector | ||
the connector block to the terminal |
| ||
connector on the camera. |
| ||
LED indicators |
|
| |
LED | Color | Indication |
|
Network | Green | Steady for connection to a 100 Mbit/s network. Flashes | |
|
| for network activity. |
|
| Amber | Steady for connection to 10 Mbit/s network. Flashes for | |
|
| network activity. |
|
| Unlit | No network connection. |
|
|
| Note: Configure Network LED to be unlit during normal | |
|
| operation, from Setup > System Options > LED settings. | |
|
| See the online help files for more information. | |
Status | Green | Steady green for normal operation. |
|
|
| Note: Configure the Status LED to be unlit during normal | |
|
| operation, or to flash only when the camera is accessed | |
|
| from Setup > System Options > LED. See the online help | |
|
| files for more information. |
|
| Amber | Steady during startup, reset to factory default or when | |
|
| restoring settings. |
|
| Red | Slow flash for failed upgrade. |
|
Power | Green | Normal operation. |
|
| Amber | Flashes green/amber during firmware upgrade. | |
Wireless | Unlit | Wired mode. |
|
| Green | Steady for connection to a wireless network. Flashes for | |
|
| network activity. |
|
| Red | Steady for no wireless network connection. Flashes when | |
|
| scanning for wireless networks. |
|