Axis Communications FD-R M12 user manual MPEG-4 clients, Motion Jpeg, Axis Media Control AMC

Page 11

AXIS 209FD/FD-R/FD-R M12 11

MPEG-4 clients

AXIS Media Control (AMC)

The recommended method of accessing live video (MPEG-4 and

Motion JPEG) from the AXIS 209FD/FD-R/FD-R M12 is to use the

AXIS Media Control (AMC) in Microsoft Internet Explorer in

Windows.

The AMC control panel can be used to configure various video and audio settings. Please see the readme file included in the tool for more information.

The AMC control panel is automatically installed on first use, after which it can be configured.

Open the AMC Control Panel from:

•Windows Control Panel (from the Start menu)

•Alternatively, right-click the video image in Internet Explorer and click Settings in the menu.

QuickTime™ & Real Player™

To access the video stream from e.g. QuickTime™ or Real Player™ the following path can be used:

rtsp://<ip>/mpeg4/media.amp

Notes: • The AXIS 209FD/FD-R/FD-R M12 supports QuickTime 6.5.1 (or later) and Real Player 10.5 (or later)

•QuickTime adds latency to the video and audio stream (up to 3 seconds)

•It may be possible to use other players to view the MPEG-4 stream using the paths above, although this is not guaranteed by Axis

•<ip> = IP address

Motion JPEG

This format uses standard JPEG still images for the video stream. These images are then displayed and updated at a rate sufficient to create a stream that shows constantly updated motion.

The Motion JPEG stream uses considerable amounts of bandwidth, but provides excellent image quality and access to each and every individual image contained in the stream. The recommended method of accessing Motion JPEG live video from the AXIS 209FD/FD-R/FD-R M12 is to use the AXIS Media Control (AMC) in Microsoft Internet Explorer in Windows.

Note also that multiple clients accessing Motion JPEG streams can use different image settings.

Alternative methods of accessing the video stream

Video/images from the AXIS 209FD/FD-R/FD-R M12 can also be accessed in the following ways:

•Motion JPEG server push (if supported by the client, e.g. Mozilla/Firefox). This option maintains an open HTTP connection to the browser and sends data as and when required, for as long as required.

•Still JPEG images in a browser. Enter e.g. the path: http://<ip>/axis-cgi/jpg/image.cgi?resolu- tion=320x240

•Windows Media Player. This requires AMC and the MPEG-4 viewing client to be installed. The paths that can be used are listed below in the order of preference.

•Unicast via RTP: axrtpu://<ip>/mpeg4/media.amp

•Unicast via RTSP: axrtsp://<ip>/mpeg4/media.amp

•Unicast via RTSP, tunneled via HTTP: axrtsphttp://<ip>/mpeg4/media.amp

•Unicast via RTSP, tunneled via HTTPS: axrtsphttps://<ip>/mpeg4/media.amp

•Multicast: axrtpm://<ip>/mpeg4/media.amp

Note: <ip> = IP address

Page 10 Page 12
Image 11
Page 10 Page 12
Contents User’s Manual Canada About this DocumentContents Glossary of Terms Index Description Key featuresProduct overview Overview LED LED IndicatorsAxis Media Control Accessing the CameraAccess from a browser Live View Setting the root passwordAccessing the camera from the Internet Video Streams How to stream MPEG-4Axis Media Control AMC Alternative methods of accessing the video streamMPEG-4 clients Motion JpegAccessing the Setup tools ConfigurationVideo Stream Video & Image SettingsText Overlay Settings Image AppearanceOverlay/Mask Type Overlay/MaskImage Formats Image Size Upload and use an overlay/maskOverlay image requirements Low Light Behavior Advanced Camera SettingsLighting Conditions Bit Rate Control Advanced MPEG-4 SettingsGOV Settings Action Buttons Live View ConfigDefault Video Format LayoutViewer Settings Default ViewerDefinitions Event ConfigurationEvent Servers Event TypesPre-trigger and Post-trigger buffers How to set up a triggered eventTriggered Events Click Add triggered on the Event typesCamera Tampering Axis 209 FD-R/FD-R M12 Scheduled EventsObject Size Motion DetectionReferrals System OptionsSecurity IP Address FilteringDate & Time Network Basic TCP/IP SettingsIP Address Configuration ServicesNetwork Advanced TCP/IP Settings WAN internet Network TrafficSmtp email QoS Quality of serviceQoS Settings Bonjour LED SettingsMaintenance UPnPUsing the Control Button Resetting to the factory default settingsUnit connectors ConfigurationAxis 209FD/FD-R/FD-R M12 Upgrading the firmware TroubleshootingEmergency recovery procedure Checking the firmwareAxis Support Browser Symptoms, Possible Causes and Remedial ActionsCamera is accessible locally, but not externally Camera is inaccessibleMotion Detection triggers unexpectedly Poor quality snapshot imagesBrowser freezes Specification Models Technical SpecificationsSpecification Installation Bandwidth General performance considerationsOptimizing your system Axis 209FD/FD-R/FD-R M12 Etrax Ethernet Token Ring Axis Axis own microprocessor Glossary of TermsSee also IP Internet Protocol VOP See VOP Megapixel See PixelURL Uniform Resource Locator An address on the network SSL/TSL Secure Socket Layer/Transport Layer SecurityAxis 209FD/FD-R/FD-R M12 AMC Index
Top Page Image Contents