Axis Communications FD-R M12 Date & Time, Network Basic TCP/IP Settings, IP Address Configuration

Page 25

AXIS 209FD/FD-R/FD-R M12 25

Date & Time

Current Server Time - displays the current date and time (24h clock). The time can be displayed in 12h clock format in the Overlay (see below).

New Server Time - Select your time zone from the drop-down list. If you want the server clock to automatically adjust for daylight savings time, select the Automatically adjust for daylight saving time changes.

From the Time Mode section, select the preferred method to use for setting the time:

•Synchronize with computer time - sets the time from the clock on your computer.

•Synchronize with NTP Server - the camera will obtain the time from an NTP server every 60 minutes.

•Set manually - this option allows you to manually set the time and date.

Note: If using a host name for the NTP server, a DNS server must be configured under TCP/IP settings.

See Network > TCP/IP below.

Date & Time Format Used in Images - specify the formats for the date and time (12h or 24h) displayed in the video streams.

Use the predefined formats or use your own custom date and time formats. See Advanced File Naming & Date/Time Formats in the online help for information on how to create your own file formats.

Network - Basic TCP/IP Settings

IP Address Configuration

The AXIS 209FD/FD-R/FD-R M12 supports both IP version 4 and IP version 6. Both versions may be enabled simultaneously, and at least one version must always be enabled.

When using IPv4, the IP address for the camera can be set automatically via DHCP, or a static IP address can be set manually.

If IPv6 is enabled, the AXIS 209FD/FD-R/FD-R M12 will receive an IP address according to the configuration in the network router.

There are also options for setting up notification of changes in the IP address, and for using the AXIS Internet Dynamic DNS Service. For more information on setting the IP address, please see the online help.

Notes: • DHCP is a protocol for automatic IP address assignment on a network. IP address assignment via DHCP may lead to the situation where the IP address changes and you lose contact with the camera. Configure the options for notification of IP address change (under Services) to receive notification from the camera when the IP address changes.

•Alternatively, if your DHCP server can update a DNS server, you can access the AXIS 209FD/FD-R/FD-R M12 by host name which is always the same, regardless of the IP address.

Services

Enable ARP/Ping setting of IP address - The IP address can be set using the ARP/Ping method, which associates the unit's MAC address with an IP address. Check this box to enable the service. Leave disabled to prevent unintentional resetting of the IP address.

Notes: • The ARP/Ping service is automatically disabled 2 minutes after the unit is started, or as soon as an IP address is set.

• Pinging the unit will still be possible when this service is disabled.

Options for notification of IP address change - If the IP address for the camera changes, e.g. automatically by DHCP, you can choose to be notified of the change. Click Settings... and enter the required information.

AXIS Internet Dynamic DNS Service - Use the AXIS Internet Dynamic DNS service to assign a host name for easy access to your AXIS 209FD/FD-R/FD-R M12 (requires Internet access).

Page 24 Page 26
Image 25
Page 24 Page 26
Contents User’s Manual Canada About this DocumentContents Glossary of Terms Index Product overview Key featuresDescription Overview LED LED IndicatorsAccess from a browser Accessing the CameraAxis Media Control Accessing the camera from the Internet Setting the root passwordLive View Video Streams How to stream MPEG-4MPEG-4 clients Alternative methods of accessing the video streamMotion Jpeg Axis Media Control AMCAccessing the Setup tools ConfigurationText Overlay Settings Video & Image SettingsImage Appearance Video StreamOverlay/Mask Type Overlay/MaskOverlay image requirements Upload and use an overlay/maskImage Formats Image Size Lighting Conditions Advanced Camera SettingsLow Light Behavior GOV Settings Advanced MPEG-4 SettingsBit Rate Control Default Video Format Live View ConfigLayout Action ButtonsViewer Settings Default ViewerEvent Servers Event ConfigurationEvent Types DefinitionsTriggered Events How to set up a triggered eventClick Add triggered on the Event types Pre-trigger and Post-trigger buffersCamera Tampering Axis 209 FD-R/FD-R M12 Scheduled EventsObject Size Motion DetectionSecurity System OptionsIP Address Filtering ReferralsIP Address Configuration Network Basic TCP/IP SettingsServices Date & TimeNetwork Advanced TCP/IP Settings WAN internet Network TrafficQoS Settings QoS Quality of serviceSmtp email Maintenance LED SettingsUPnP BonjourUnit connectors Resetting to the factory default settingsConfiguration Using the Control ButtonAxis 209FD/FD-R/FD-R M12 Emergency recovery procedure TroubleshootingChecking the firmware Upgrading the firmwareAxis Support Camera is accessible locally, but not externally Symptoms, Possible Causes and Remedial ActionsCamera is inaccessible BrowserBrowser freezes Poor quality snapshot imagesMotion Detection triggers unexpectedly Specification Models Technical SpecificationsSpecification Installation Optimizing your system General performance considerationsBandwidth Axis 209FD/FD-R/FD-R M12 Etrax Ethernet Token Ring Axis Axis own microprocessor Glossary of TermsSee also IP Internet Protocol VOP See VOP Megapixel See PixelURL Uniform Resource Locator An address on the network SSL/TSL Secure Socket Layer/Transport Layer SecurityAxis 209FD/FD-R/FD-R M12 AMC Index
Top Page Image Contents