Axis Communications FD-R M12 user manual LED Indicators, Led

Page 7

AXIS 209FD/FD-R/FD-R M12 7

Control button - Press this button to install using the AXIS Internet Dynamic DNS Service, or to restore the factory default settings, as described in Resetting to the factory default settings, on page 30.

LED Indicators

LED	Color	Description

Network	Green	Steady for connection to 100 Mbit/s network. Flashes for network activity.

	Amber	Steady for connection to 10 Mbit/s network. Flashes for network activity.

	Unlit	No connection.

Status	Green	Shows steady green for normal operation.
		Note: The Status LED can be configured to be unlit during normal operation,
		or to flash only when the camera is accessed. See the online help files for
		more information. Go to Setup > System Options > LED settings

	Amber	Steady during startup, reset to factory default or when restoring settings.

	Red	Slow flash for failed upgrade.

Power	Green	Normal operation.

	Amber	Flashes green/amber during firmware upgrade.

Image 7

Contents User’s Manual Canada About this DocumentContents Glossary of Terms Index Product overview Key featuresDescription Overview LED LED IndicatorsAccess from a browser Accessing the CameraAxis Media Control Accessing the camera from the Internet Setting the root passwordLive View Video Streams How to stream MPEG-4Axis Media Control AMC Alternative methods of accessing the video streamMPEG-4 clients Motion JpegAccessing the Setup tools ConfigurationVideo Stream Video & Image SettingsText Overlay Settings Image AppearanceOverlay/Mask Type Overlay/MaskOverlay image requirements Upload and use an overlay/maskImage Formats Image Size Lighting Conditions Advanced Camera SettingsLow Light Behavior GOV Settings Advanced MPEG-4 SettingsBit Rate Control Action Buttons Live View ConfigDefault Video Format LayoutViewer Settings Default ViewerDefinitions Event ConfigurationEvent Servers Event TypesPre-trigger and Post-trigger buffers How to set up a triggered eventTriggered Events Click Add triggered on the Event typesCamera Tampering Axis 209 FD-R/FD-R M12 Scheduled EventsObject Size Motion DetectionReferrals System OptionsSecurity IP Address FilteringDate & Time Network Basic TCP/IP SettingsIP Address Configuration ServicesNetwork Advanced TCP/IP Settings WAN internet Network TrafficQoS Settings QoS Quality of serviceSmtp email Bonjour LED SettingsMaintenance UPnPUsing the Control Button Resetting to the factory default settingsUnit connectors ConfigurationAxis 209FD/FD-R/FD-R M12 Upgrading the firmware TroubleshootingEmergency recovery procedure Checking the firmwareAxis Support Browser Symptoms, Possible Causes and Remedial ActionsCamera is accessible locally, but not externally Camera is inaccessibleBrowser freezes Poor quality snapshot imagesMotion Detection triggers unexpectedly Specification Models Technical SpecificationsSpecification Installation Optimizing your system General performance considerationsBandwidth Axis 209FD/FD-R/FD-R M12 Etrax Ethernet Token Ring Axis Axis own microprocessor Glossary of TermsSee also IP Internet Protocol VOP See VOP Megapixel See PixelURL Uniform Resource Locator An address on the network SSL/TSL Secure Socket Layer/Transport Layer SecurityAxis 209FD/FD-R/FD-R M12 AMC Index

LED Indicators

LED

Color

Description

more information. Go to Setup > System Options > LED settings