Axis Communications FD-R M12 Video & Image Settings, Image Appearance, Text Overlay Settings

Page 13

AXIS 209FD/FD-R/FD-R M12 13

Video & Image Settings

Image Appearance

Use these settings to change the image as required. The image can be rotated, the image resolution and compression can be adjusted, and the white balance can be changed.

The configuration of the video image will affect the camera’s overall performance, depending on how it is used and on the available bandwidth. Setting higher resolution and lower compression improves video image quality, but increases the amount of bandwidth required.

Please see the online help for further information on these settings.

Text Overlay Settings

The date, time, and user defined text can be included on one line, either on the top or bottom of the video image.

It is also possible to set how the text and text background are displayed. You can set the text to be either black or white, and the text background can also be set to black, white, semi-transparent, or transparent.

Please see the online help for further information on these settings.

Video Stream

Text, date and time overlay

Define the maximum video stream time per session in seconds, minutes or hours. When the set time has expired, a new stream can be started by refreshing the page in the browser. For unlimited video stream time, select the Unlimited radio button. Note that the maximum video stream time does not apply to clients connecting via multicast.

The frame rate allowed to each viewer can also be limited, to avoid bandwidth problems on the network. To allow the highest available frame rate, select the Unlimited radio button.

Image 13
Contents User’s Manual Canada About this DocumentContents Glossary of Terms Index Product overview Key featuresDescription Overview LED LED IndicatorsAccess from a browser Accessing the CameraAxis Media Control Accessing the camera from the Internet Setting the root passwordLive View Video Streams How to stream MPEG-4MPEG-4 clients Alternative methods of accessing the video streamMotion Jpeg Axis Media Control AMCAccessing the Setup tools ConfigurationText Overlay Settings Video & Image SettingsImage Appearance Video StreamOverlay/Mask Type Overlay/MaskOverlay image requirements Upload and use an overlay/maskImage Formats Image Size Lighting Conditions Advanced Camera SettingsLow Light Behavior GOV Settings Advanced MPEG-4 SettingsBit Rate Control Default Video Format Live View ConfigLayout Action ButtonsViewer Settings Default ViewerEvent Servers Event ConfigurationEvent Types DefinitionsTriggered Events How to set up a triggered eventClick Add triggered on the Event types Pre-trigger and Post-trigger buffersCamera Tampering Axis 209 FD-R/FD-R M12 Scheduled EventsObject Size Motion DetectionSecurity System OptionsIP Address Filtering ReferralsIP Address Configuration Network Basic TCP/IP SettingsServices Date & TimeNetwork Advanced TCP/IP Settings WAN internet Network TrafficQoS Settings QoS Quality of serviceSmtp email Maintenance LED SettingsUPnP BonjourUnit connectors Resetting to the factory default settingsConfiguration Using the Control ButtonAxis 209FD/FD-R/FD-R M12 Emergency recovery procedure TroubleshootingChecking the firmware Upgrading the firmwareAxis Support Camera is accessible locally, but not externally Symptoms, Possible Causes and Remedial ActionsCamera is inaccessible BrowserBrowser freezes Poor quality snapshot imagesMotion Detection triggers unexpectedly Specification Models Technical SpecificationsSpecification Installation Optimizing your system General performance considerationsBandwidth Axis 209FD/FD-R/FD-R M12 Etrax Ethernet Token Ring Axis Axis own microprocessor Glossary of TermsSee also IP Internet Protocol VOP See VOP Megapixel See PixelURL Uniform Resource Locator An address on the network SSL/TSL Secure Socket Layer/Transport Layer SecurityAxis 209FD/FD-R/FD-R M12 AMC Index