Axis Communications FD-R M12 user manual Network Traffic, WAN internet

Page 27

AXIS 209FD/FD-R/FD-R M12 27

Use NAT traversal when your AXIS 209FD/FD-R/FD-R M12 is located on an intranet (LAN) and you wish to make it available from the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT router will be forwarded to the camera.

LAN (intranet)

WAN (internet)

Broadband

(NAT)ISP router

Notes: • For NAT traversal to work, this must also be supported by the broadband router.

•The broadband router has many different names: “NAT router”, “Network router“, Internet Gateway”, “Broadband sharing device” or “Home firewall” but the essential purpose of the device is the same.

Enable/Disable - When enabled, the AXIS 209FD/FD-R/FD-R M12 will attempt to configure port mapping in a NAT router on your network, using UPnP™. Note that UPnP™ must be enabled in the camera (see System Options > Network > UPnP).

Use manually selected NAT router - Select this option to manually select a NAT router and enter the IP address for the router in the field provided.

If a router is not manually specified, the AXIS 209FD/FD-R/FD-R M12 will automatically search for NAT routers on your network. If more than one router is found, the default router will be selected.

Alternative HTTP port - Select this option to manually define an external HTTP port. Enter the port number in the field provided. If no port is entered here a port number will automatically be selected when NAT traversal is enabled.

Notes: • An alternative HTTP port can be used/be active even if NAT traversal is disabled. This is useful if e.g. your NAT router does not support UPnP and you need to manually configure port forwarding in the NAT router.

•If you attempt to manually enter a port that is already in use, another available port will automatically be selected.

•When the port is selected automatically it will be displayed in this field. This can be changed by entering a new port number and clicking Save.

FTP

The FTP server running in the AXIS 209FD/FD-R/FD-R M12 enables the upload of e.g. new firmware, user applications, etc. Check the box to enable the service.

RTSP

The RTSP protocol allows a connecting client to start an MPEG-4 stream. Check the box to enable the server and enter the RTSP port number to use. The default setting is 554. Note that MPEG-4 video streams will not be available if this service is not enabled.

Network Traffic

Connection Type - The default setting is Auto-negotiate, which means that the correct speed is automatically selected. If necessary, you can set the connection speed by selecting it from the drop-down list.

Maximum bandwidth - To minimize the impact on other services running on your network, it is possible to configure the maximum network bandwidth the product will be allowed to use. Specify the maximum bandwidth (in Mbit/s or kbit/s) allowed, or set to Unlimited.

Page 26 Page 28
Image 27
Page 26 Page 28
Contents User’s Manual Canada About this DocumentContents Glossary of Terms Index Key features Product overviewDescription Overview LED LED IndicatorsAccessing the Camera Access from a browserAxis Media Control Setting the root password Accessing the camera from the InternetLive View Video Streams How to stream MPEG-4Axis Media Control AMC Alternative methods of accessing the video streamMPEG-4 clients Motion JpegAccessing the Setup tools ConfigurationVideo Stream Video & Image SettingsText Overlay Settings Image AppearanceOverlay/Mask Type Overlay/MaskUpload and use an overlay/mask Overlay image requirementsImage Formats Image Size Advanced Camera Settings Lighting ConditionsLow Light Behavior Advanced MPEG-4 Settings GOV SettingsBit Rate Control Action Buttons Live View ConfigDefault Video Format LayoutViewer Settings Default ViewerDefinitions Event ConfigurationEvent Servers Event TypesPre-trigger and Post-trigger buffers How to set up a triggered eventTriggered Events Click Add triggered on the Event typesCamera Tampering Axis 209 FD-R/FD-R M12 Scheduled EventsObject Size Motion DetectionReferrals System OptionsSecurity IP Address FilteringDate & Time Network Basic TCP/IP SettingsIP Address Configuration ServicesNetwork Advanced TCP/IP Settings WAN internet Network TrafficQoS Quality of service QoS SettingsSmtp email Bonjour LED SettingsMaintenance UPnPUsing the Control Button Resetting to the factory default settingsUnit connectors ConfigurationAxis 209FD/FD-R/FD-R M12 Upgrading the firmware TroubleshootingEmergency recovery procedure Checking the firmwareAxis Support Browser Symptoms, Possible Causes and Remedial ActionsCamera is accessible locally, but not externally Camera is inaccessiblePoor quality snapshot images Browser freezesMotion Detection triggers unexpectedly Specification Models Technical SpecificationsSpecification Installation General performance considerations Optimizing your systemBandwidth Axis 209FD/FD-R/FD-R M12 Etrax Ethernet Token Ring Axis Axis own microprocessor Glossary of TermsSee also IP Internet Protocol VOP See VOP Megapixel See PixelURL Uniform Resource Locator An address on the network SSL/TSL Secure Socket Layer/Transport Layer SecurityAxis 209FD/FD-R/FD-R M12 AMC Index
Top Page Image Contents