Panasonic WV-NW964, WV-NS954 manual Stabilizer, Pan·Tilt degree/Zoom ratio display, Tilt Angle

Page 24

[Stabilizer]

Select whether or not to use the camera's stabilizer function. This function is effective, for example, when the camera is installed on a utility pole.

ON: Vibration is reduced.

OFF: Vibration is not reduced.

Default: OFF

Important:

When "ON" is selected for this function, the view angle becomes narrower and the image capture size is reduced. When installing the camera with this

function set to "ON", adjust the view angle. (Operating Instructions)

The stabilizer may not be effective for the following subjects:

Objects in low lighting

Non-contrast objects (white walls etc)

Fast moving periodic action, such as mechanical vibration

Large-scale amplitude vibrations

[EL-ZOOM]

Select "ON" or "OFF" to determine whether or not to use the electronic zoom.

ON (Max X10): Images can be zoomed in on with the optical zoom (1x - 30x) and the electronic zoom (23x

– 300x).

OFF: Does not use the electronic zoom.

Default: OFF

Notes:

When "ON" is selected, zooming will stop when the zoom factor has reached 30x.

When the zoom factor is increased to 30x (EL-zoom) or more, the image resolution will be lower.

When the zoom factor is 30x or more, the setting of the preset positions will become unavailable.

[Pan·Tilt degree/Zoom ratio display]

Select "ON" or "OFF" to determine whether or not to dis- play the current panning/tilting degree and the zoom factor on images when the camera is being operated manually.

ON: Displays the current panning/tilting degree and the zoom factor.

OFF: Does not display the current panning/tilting degree and the zoom factor.

Default: ON

Note:

When "ON" is selected, the panning/tilting degree and the zoom factor will be displayed at the position selected for "OSD Position" on the [Basic] tab of the "Basic setup" page. (page 9)

[Tilt Angle]

Select the maximum degree for tilting from the following. (Level = 0°)

0°/–1°/–2°/–3°/–4°/–5° Default:

Note:

When "–5°" is selected for "Tilt Angle", the upper half of images will be hidden in the WIDE mode. When "ON" is selected for "Gain" (page 23), some images become whitish due to the AGC effect. Refer to the network operating instructions (PDF) for further information about the setup menu.

24

Image 24
Contents WV-NW964 Contents About these operating instructions Trademarks and registered trademarksViewer software How to display the setup menu StepHow to operate the setup menu About the setup menu window Network setup button Schedule setup buttonMaintenance button 3SetupConfigure the basic settings of the camera Basic setup Configure the basic settings BasicAlarm status update mode Default Real timeAlarm status port Default onConfigure the settings relating to the NTP server NTP SD memory card setup SD memory card information Page Step Image capture size VGA Image capture size QvgaConfigure the settings relating to the logs LOG AlarmFTP error ManualOFF LOG tab SD memory card tab Logs and associated images SD memory Save trigger Overwrite Save logs CardSD memory Save logs CardJpeg setup Default VGA Image qualityDefault 5 fps Refresh interval JpegMPEG-4 setup Default Unicast port2 Audio Default Multicast addressDefault Multicast TTL Available value 1 DefaultDefault OFF Camera title on screen 0-9, A-Z Default 1 min Image HoldCamera title on screen Home positionStabilizer Pan·Tilt degree/Zoom ratio displayTilt Angle Image Adjust Preset PositionAuto Pan PatrolSuper Dynamic About SUPER-D 3 Super Dynamic functionDefault Auto Default on High Sensitivity upBlack & white mode Default High Wait timeDefault ATW1 Default High Chroma gain levelRed Gain Blue GainSet mask areas Register the preset position Edit the settings of the registered preset positionPosition No Position Auto panGO button Number of patrol patternLearn patrol pattern Zone setting Privacy zoneMode Zone selectConfigure the settings relating to audio Audio Audio modeDefault 32 kbps Audio bit rateMic input volume Camera to PC Default Middle Mic input interval Camera to PCDefault 40 msec Audio output volume PC to CameraConfigures the multi-screen settings Multi-screen setup IP addressNumber of characters for the IP address 1 Configure the alarm settings Alarm setup Configure the settings relating to the alarm AlarmAlarm setup Camera motion on alarm Command alarm Originating port numberAvailable port number 1 Configure the settings relating to the alarm image Alarm image setupDefault OFF Command alarm To FTP setup Alarm image FTP transmissionPost alarm Transmission interval Default 1 fps Number of imagesConfigure the settings relating to the alarm out terminal Alarm output terminal setupAUX name Set the VMD areas VMD area Default OFF Detection sensitivity StatusSet the VMD areas for each preset position Delete the VMD area set for the designated preset position Default MiddleMail notification setup Configure the settings relating to Panasonic alarm protocol Panasonic alarm protocol setupPanasonic alarm protocol User authentication Default OFF User namePassword Retype password Number of characters for the password 4 32 charHost authentication Default OFF Access levelConfigure the settings of the servers Server setup Configure the settings relating to the mail server MailConfigure the settings relating to the FTP server FTP Configuring the network settings Network setup Configure the network settings NetworkNetwork setup Default gateway Unavailable IP addresses for the default gate- wayAvailable port number 1 Default Port numbers already in use Default Manual Primary DNS, Secondary DNSWAN Configure the settings relating to Ddns Ddns Access intervalDefault OFF Host name Number of characters for the host name 1 64 charConfigure the settings relating to Snmp Snmp Default OFF Directory FTP periodic transmissionFTP periodic transmission Number of characters for the directory name 1Schedule setup How to configure the schedule settingsInterval How to delete the set schedule How to set the schedules Maintenance of the camera Maintenance Error messageCheck the system log System log Time & dateUpgrade the firmware Upgrade How to upgrade the firmwareInitialize setup data and Html data Initialize/restart the camera InitializationInitialize Html data RestartSetup screen Step Displaying the Help screenHelp screen Step Error indications relating to Smtp Error indications relating to FTPCategory Indication Description Error indications relating to Ddns Error indications relating to NTPError indications relating to login Troubleshooting Symptom Installation Guide Cause/solution Reference Pages Installation Guide Operation Instructions Symptom Solutions Reference Pages Directory structure of drive B Group LAN IP address LAN port WAN IP address Protocol Group WAN IP address Protocol LAN IP address LAN portN0907-0 3TR005323AAB
Related manuals
Manual 21 pages 50.64 Kb

WV-NW964, WV-NS954 specifications

The Panasonic WV-NW964 and WV-NS954 are advanced network cameras designed for high-performance surveillance in various applications. Both models offer a remarkable combination of features, technologies, and characteristics that make them ideal for security monitoring in both indoor and outdoor environments.

The WV-NW964 is a high-definition network camera equipped with a 1/3-inch progressive scan CCD sensor, delivering exceptional image quality with resolutions up to 1280x960 pixels. It is particularly well-suited for situations where clarity and detail are paramount, such as in retail spaces or critical infrastructure facilities. The camera supports H.264 compression technology, which allows for efficient video streaming while maintaining high image quality. This feature is particularly useful for reducing bandwidth requirements and storage costs without compromising surveillance effectiveness.

On the other hand, the WV-NS954 is a PTZ (pan-tilt-zoom) network camera that provides extensive flexibility in monitoring wide areas. With its 3x optical zoom lens, it enables users to focus on specific subjects or areas of interest without loss of detail. The camera's ability to pan 360 degrees and tilt up to 90 degrees allows for comprehensive coverage of large spaces, making it ideal for applications such as parking lots, open-air venues, and warehouses.

Both cameras are equipped with advanced features such as digital noise reduction and wide dynamic range (WDR) technology, ensuring clear images in varying lighting conditions. The WDR feature is particularly beneficial in scenarios where backlighting can obscure details, allowing for better visibility of individuals or objects even in challenging environments. Additionally, the cameras support multiple streaming formats and resolutions, providing flexibility in how video feeds are accessed and managed across different network systems.

With built-in motion detection and event-triggered recording capabilities, both cameras enhance security by providing alerts when unusual activity is detected. Users can customize alert settings based on specific needs, ensuring efficient and timely response to potential security threats. Furthermore, both models are designed with robust IP66-rated weatherproofing, making them suitable for outdoor deployment in various weather conditions without the risk of damage.

In summary, the Panasonic WV-NW964 and WV-NS954 network cameras deliver outstanding performance through their advanced imaging technologies and versatile functionalities. With features tailored for high-quality surveillance, efficient data management, and user-friendly operation, they are essential tools for enhancing security in a variety of applications.