Panasonic WV-NS954 manual About these operating instructions, Trademarks and registered trademarks

Page 3

Preface

About these operating instructions

There are 3 sets of operating instructions for the WV-NS954, WV-NW964 as follows.

Installation Guide

Operating instructions

Setup Instructions

WV-NS954 Network camera (for indoor use)

WV-NW964 Network camera (for outdoor use)

* The screens used in these Setup Instructions show the case of WV-NS954.

These setup Instructions contain descriptions of how to operate this product* using a PC via a network and of how to configure the settings.

Refer to the installation guide for descriptions of how to install this product and of how to connect to a network. Adobe® Reader is required to read PDF. When the Adobe® Reader is not installed on the PC, download the latest Adobe® Reader from the Adobe web site and install it.

Trademarks and registered trademarks

Microsoft, Windows, Windows Vista, Internet Explorer, ActiveX and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

SD logo is a trademark.

mini SD is a trademark.

Other names of companies and product contained in these operating instructions may be trademarks or regis- tered trademarks of their respective owners.

Viewer software

Images will not be displayed when the viewer software "Network camera View3" is not installed on the PC. This software can be installed directly from the camera or by double clicking "nwcv3setup.exe" on the CD-ROM pro- vided, and then following the on-screen instructions.

Important:

The default setting of "Automatic installation of Viewer software" is "ON". Follow the instructions on page 74 when the message is displayed on the information bar of the browser.

When the "Live" page is displayed for the first time, the install wizard of the ActiveX control required to display images from the camera will be displayed.

Follow the instructions of the wizard.

When the install wizard is displayed again even after completing the installation of the ActiveX, restart the PC.

The viewer software used on each PC should be licensed individually. The number of installations of the viewer software from the camera can be checked on the [Upgrade] tab of the "Maintenance" page (page 63). Refer to your dealer for the software licensing.

3

Image 3
Contents WV-NW964 Contents About these operating instructions Trademarks and registered trademarksViewer software Step How to display the setup menuHow to operate the setup menu About the setup menu window 3Setup Network setup buttonSchedule setup button Maintenance buttonConfigure the basic settings Basic Configure the basic settings of the camera Basic setupDefault on Alarm status update modeDefault Real time Alarm status portConfigure the settings relating to the NTP server NTP SD memory card setup SD memory card information Page Step Image capture size Qvga Image capture size VGAManual Configure the settings relating to the logs LOGAlarm FTP errorOFF SD memory Save trigger Overwrite Save logs Card LOG tab SD memory card tab Logs and associated imagesSave logs Card SD memoryRefresh interval Jpeg Jpeg setupDefault VGA Image quality Default 5 fpsMPEG-4 setup Available value 1 Default Default Unicast port2 AudioDefault Multicast address Default Multicast TTLHome position Default OFF Camera title on screen 0-9, A-ZDefault 1 min Image Hold Camera title on screenStabilizer Pan·Tilt degree/Zoom ratio displayTilt Angle Patrol Image AdjustPreset Position Auto PanAbout SUPER-D 3 Super Dynamic function Super DynamicDefault High Wait time Default AutoDefault on High Sensitivity up Black & white modeBlue Gain Default ATW1Default High Chroma gain level Red GainSet mask areas Edit the settings of the registered preset position Register the preset positionPosition No Auto pan PositionGO button Number of patrol patternLearn patrol pattern Zone select Zone settingPrivacy zone ModeAudio bit rate Configure the settings relating to audio AudioAudio mode Default 32 kbpsAudio output volume PC to Camera Mic input volume Camera to PCDefault Middle Mic input interval Camera to PC Default 40 msecConfigures the multi-screen settings Multi-screen setup IP addressNumber of characters for the IP address 1 Configure the alarm settings Alarm setup Configure the settings relating to the alarm AlarmAlarm setup Camera motion on alarm Command alarm Originating port numberAvailable port number 1 Configure the settings relating to the alarm image Alarm image setupDefault OFF Command alarm Default 1 fps Number of images To FTP setupAlarm image FTP transmission Post alarm Transmission intervalConfigure the settings relating to the alarm out terminal Alarm output terminal setupAUX name Set the VMD areas VMD area Status Default OFF Detection sensitivitySet the VMD areas for each preset position Default Middle Delete the VMD area set for the designated preset positionMail notification setup Configure the settings relating to Panasonic alarm protocol Panasonic alarm protocol setupPanasonic alarm protocol Number of characters for the password 4 32 char User authenticationDefault OFF User name Password Retype passwordDefault OFF Access level Host authenticationConfigure the settings relating to the mail server Mail Configure the settings of the servers Server setupConfigure the settings relating to the FTP server FTP Configuring the network settings Network setup Configure the network settings NetworkNetwork setup Default Manual Primary DNS, Secondary DNS Default gatewayUnavailable IP addresses for the default gate- way Available port number 1 Default Port numbers already in useWAN Number of characters for the host name 1 64 char Configure the settings relating to Ddns DdnsAccess interval Default OFF Host nameConfigure the settings relating to Snmp Snmp Number of characters for the directory name 1 Default OFF DirectoryFTP periodic transmission FTP periodic transmissionSchedule setup How to configure the schedule settingsInterval How to delete the set schedule How to set the schedules Time & date Maintenance of the camera MaintenanceError message Check the system log System logHow to upgrade the firmware Upgrade the firmware UpgradeRestart Initialize setup data and Html dataInitialize/restart the camera Initialization Initialize Html dataSetup screen Step Displaying the Help screenHelp screen Step Error indications relating to Smtp Error indications relating to FTPCategory Indication Description Error indications relating to Ddns Error indications relating to NTPError indications relating to login Troubleshooting Symptom Installation Guide Cause/solution Reference Pages Installation Guide Operation Instructions Symptom Solutions Reference Pages Directory structure of drive B Group WAN IP address Protocol LAN IP address LAN port Group LAN IP address LAN port WAN IP address ProtocolN0907-0 3TR005323AAB
Related manuals
Manual 21 pages 50.64 Kb

WV-NW964, WV-NS954 specifications

The Panasonic WV-NW964 and WV-NS954 are advanced network cameras designed for high-performance surveillance in various applications. Both models offer a remarkable combination of features, technologies, and characteristics that make them ideal for security monitoring in both indoor and outdoor environments.

The WV-NW964 is a high-definition network camera equipped with a 1/3-inch progressive scan CCD sensor, delivering exceptional image quality with resolutions up to 1280x960 pixels. It is particularly well-suited for situations where clarity and detail are paramount, such as in retail spaces or critical infrastructure facilities. The camera supports H.264 compression technology, which allows for efficient video streaming while maintaining high image quality. This feature is particularly useful for reducing bandwidth requirements and storage costs without compromising surveillance effectiveness.

On the other hand, the WV-NS954 is a PTZ (pan-tilt-zoom) network camera that provides extensive flexibility in monitoring wide areas. With its 3x optical zoom lens, it enables users to focus on specific subjects or areas of interest without loss of detail. The camera's ability to pan 360 degrees and tilt up to 90 degrees allows for comprehensive coverage of large spaces, making it ideal for applications such as parking lots, open-air venues, and warehouses.

Both cameras are equipped with advanced features such as digital noise reduction and wide dynamic range (WDR) technology, ensuring clear images in varying lighting conditions. The WDR feature is particularly beneficial in scenarios where backlighting can obscure details, allowing for better visibility of individuals or objects even in challenging environments. Additionally, the cameras support multiple streaming formats and resolutions, providing flexibility in how video feeds are accessed and managed across different network systems.

With built-in motion detection and event-triggered recording capabilities, both cameras enhance security by providing alerts when unusual activity is detected. Users can customize alert settings based on specific needs, ensuring efficient and timely response to potential security threats. Furthermore, both models are designed with robust IP66-rated weatherproofing, making them suitable for outdoor deployment in various weather conditions without the risk of damage.

In summary, the Panasonic WV-NW964 and WV-NS954 network cameras deliver outstanding performance through their advanced imaging technologies and versatile functionalities. With features tailored for high-quality surveillance, efficient data management, and user-friendly operation, they are essential tools for enhancing security in a variety of applications.