Panasonic WV-NW964, WV-NS954 manual Configure the alarm settings Alarm setup

Page 38

Configure the alarm settings [Alarm setup]

The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, the alarm occurrence notification, and the VMD area settings can be configured on this page.

The "Alarm setup" page has 3 tabs; the [Alarm] tab, the [VMD area] tab and the [Notification] tab. The terminal alarms 1, 2, and 3 indicate the EXT I/Os 1, 2, and 3, respectively (Installation Guide).

Configure the settings relating to the alarm [Alarm]

Click the [Alarm] tab on the "Alarm setup" page. (pages 4 and 5: How to display/operate the setup menu)

Alarm setup

The settings relating to the alarm can be configured in this section. Refer to pages 39, 41 and 42 for further informa- tion about the settings relating to the camera action at an alarm occurrence, the alarm image and the alarm output terminal.

[Terminal alarm 1]

Select "OFF" or "Alarm input" to determine whether or not to receive a terminal alarm 1.

OFF: Does not receive alarms.

Alarm input: Receives alarms.

BW/color select terminal: Toggles between black & white and color in accordance with input.

Note:

When an input is provided to the BW/color select ter- minal during patrol, the patrol action stops. If the patrol action is continued, select "Patrol 1" in the [Self return] box.

Default: OFF

[Terminal alarm 2]

Determine whether or not to receive a terminal alarm 2 by selecting "OFF", "Alarm input" or "Alarm output". OFF: Does not receive alarms.

Alarm input: Receives alarms.

Alarm output: Alarm output will be carried out accord- ing to the settings for "Alarm output terminal setup" (page 42).

Default: OFF

[Terminal alarm 3]

Determine whether or not to receive a terminal alarm 3 by selecting "OFF", "Alarm input" or "AUX output". OFF: Does not receive.

Alarm input: Receives alarms.

AUX output: The AUX buttons will be displayed on the "Live" page.

Default: OFF

Note:

AUX is a camera terminal that allows users to oper- ate (OPEN/CLOSE) at will from the "Live" page. For example, an operator can remotely control lights in a place where the camera is installed by connecting the terminal to the light controller.

[VMD alarm]

Select "ON" or "OFF" to determine whether or not to perform the alarm action using the VMD function. Refer to page 43 for descriptions of how to set the VMD areas.

Default: OFF

Important:

When the VMD alarm is set to "ON", the refresh interval for MPEG-4 and JPEG (QVGA) images becomes up to 15 fps.

38

Image 38
Contents WV-NW964 Contents Viewer software About these operating instructionsTrademarks and registered trademarks How to display the setup menu StepHow to operate the setup menu About the setup menu window Maintenance button Network setup buttonSchedule setup button 3SetupConfigure the basic settings of the camera Basic setup Configure the basic settings BasicAlarm status port Alarm status update modeDefault Real time Default onConfigure the settings relating to the NTP server NTP SD memory card setup SD memory card information Page Step Image capture size VGA Image capture size QvgaFTP error Configure the settings relating to the logs LOGAlarm ManualOFF LOG tab SD memory card tab Logs and associated images SD memory Save trigger Overwrite Save logs CardSD memory Save logs CardDefault 5 fps Jpeg setupDefault VGA Image quality Refresh interval JpegMPEG-4 setup Default Multicast TTL Default Unicast port2 AudioDefault Multicast address Available value 1 DefaultCamera title on screen Default OFF Camera title on screen 0-9, A-ZDefault 1 min Image Hold Home positionTilt Angle StabilizerPan·Tilt degree/Zoom ratio display Auto Pan Image AdjustPreset Position PatrolSuper Dynamic About SUPER-D 3 Super Dynamic functionBlack & white mode Default AutoDefault on High Sensitivity up Default High Wait timeRed Gain Default ATW1Default High Chroma gain level Blue GainSet mask areas Register the preset position Edit the settings of the registered preset positionPosition No Position Auto panLearn patrol pattern GO buttonNumber of patrol pattern Mode Zone settingPrivacy zone Zone selectDefault 32 kbps Configure the settings relating to audio AudioAudio mode Audio bit rateDefault 40 msec Mic input volume Camera to PCDefault Middle Mic input interval Camera to PC Audio output volume PC to CameraNumber of characters for the IP address 1 Configures the multi-screen settings Multi-screen setupIP address Alarm setup Configure the alarm settings Alarm setupConfigure the settings relating to the alarm Alarm Available port number 1 Camera motion on alarmCommand alarm Originating port number Default OFF Command alarm Configure the settings relating to the alarm imageAlarm image setup Post alarm Transmission interval To FTP setupAlarm image FTP transmission Default 1 fps Number of imagesAUX name Configure the settings relating to the alarm out terminalAlarm output terminal setup Set the VMD areas VMD area Default OFF Detection sensitivity StatusSet the VMD areas for each preset position Delete the VMD area set for the designated preset position Default MiddleMail notification setup Panasonic alarm protocol Configure the settings relating to Panasonic alarm protocolPanasonic alarm protocol setup Password Retype password User authenticationDefault OFF User name Number of characters for the password 4 32 charHost authentication Default OFF Access levelConfigure the settings of the servers Server setup Configure the settings relating to the mail server MailConfigure the settings relating to the FTP server FTP Network setup Configuring the network settings Network setupConfigure the network settings Network Available port number 1 Default Port numbers already in use Default gatewayUnavailable IP addresses for the default gate- way Default Manual Primary DNS, Secondary DNSWAN Default OFF Host name Configure the settings relating to Ddns DdnsAccess interval Number of characters for the host name 1 64 charConfigure the settings relating to Snmp Snmp FTP periodic transmission Default OFF DirectoryFTP periodic transmission Number of characters for the directory name 1Interval Schedule setupHow to configure the schedule settings How to delete the set schedule How to set the schedules Check the system log System log Maintenance of the camera MaintenanceError message Time & dateUpgrade the firmware Upgrade How to upgrade the firmwareInitialize Html data Initialize setup data and Html dataInitialize/restart the camera Initialization RestartHelp screen Step Setup screen StepDisplaying the Help screen Category Indication Description Error indications relating to SmtpError indications relating to FTP Error indications relating to login Error indications relating to DdnsError indications relating to NTP Troubleshooting Symptom Installation Guide Cause/solution Reference Pages Installation Guide Operation Instructions Symptom Solutions Reference Pages Directory structure of drive B Group LAN IP address LAN port WAN IP address Protocol Group WAN IP address Protocol LAN IP address LAN portN0907-0 3TR005323AAB
Related manuals
Manual 21 pages 50.64 Kb

WV-NW964, WV-NS954 specifications

The Panasonic WV-NW964 and WV-NS954 are advanced network cameras designed for high-performance surveillance in various applications. Both models offer a remarkable combination of features, technologies, and characteristics that make them ideal for security monitoring in both indoor and outdoor environments.

The WV-NW964 is a high-definition network camera equipped with a 1/3-inch progressive scan CCD sensor, delivering exceptional image quality with resolutions up to 1280x960 pixels. It is particularly well-suited for situations where clarity and detail are paramount, such as in retail spaces or critical infrastructure facilities. The camera supports H.264 compression technology, which allows for efficient video streaming while maintaining high image quality. This feature is particularly useful for reducing bandwidth requirements and storage costs without compromising surveillance effectiveness.

On the other hand, the WV-NS954 is a PTZ (pan-tilt-zoom) network camera that provides extensive flexibility in monitoring wide areas. With its 3x optical zoom lens, it enables users to focus on specific subjects or areas of interest without loss of detail. The camera's ability to pan 360 degrees and tilt up to 90 degrees allows for comprehensive coverage of large spaces, making it ideal for applications such as parking lots, open-air venues, and warehouses.

Both cameras are equipped with advanced features such as digital noise reduction and wide dynamic range (WDR) technology, ensuring clear images in varying lighting conditions. The WDR feature is particularly beneficial in scenarios where backlighting can obscure details, allowing for better visibility of individuals or objects even in challenging environments. Additionally, the cameras support multiple streaming formats and resolutions, providing flexibility in how video feeds are accessed and managed across different network systems.

With built-in motion detection and event-triggered recording capabilities, both cameras enhance security by providing alerts when unusual activity is detected. Users can customize alert settings based on specific needs, ensuring efficient and timely response to potential security threats. Furthermore, both models are designed with robust IP66-rated weatherproofing, making them suitable for outdoor deployment in various weather conditions without the risk of damage.

In summary, the Panasonic WV-NW964 and WV-NS954 network cameras deliver outstanding performance through their advanced imaging technologies and versatile functionalities. With features tailored for high-quality surveillance, efficient data management, and user-friendly operation, they are essential tools for enhancing security in a variety of applications.