Panasonic WV-NW964, WV-NS954 manual Configure the settings relating to Panasonic alarm protocol

Page 48

Configure the settings relating to Panasonic alarm protocol

Click the [Notification] tab on the "Alarm setup" page. (pages 4 and 5: How to display/operate the setup menu)

Panasonic alarm protocol setup

The settings relating to Panasonic alarm protocol can be configured in this section.

[Panasonic alarm protocol]

Select "ON" or "OFF" to determine whether or not to provide notification of an alarm occurrence by Panasonic alarm protocol when an alarm is detected. Default: OFF

Note:

When "ON" is selected, notification of the alarm occurrence will be provided to the registered desti- nation addresses in order (to IP address 1 first, to IP address 8 last).

[Destination port]

Select a destination port for the Panasonic alarm proto- col from the following.

Available port number: 1 - 65535

Default: 1818

[Retry times]

Select a retry time for the Panasonic alarm protocol. Available retry times: 1 - 30

Default: 2

Panasonic alarm protocol

[Destination IP address]

Enter the destination IP address of the Panasonic alarm protocol from the following. Host name is unavailable for the destination IP address. Up to 8 destination address- es can be registered.

To provide notification at an alarm occurrence to the desired IP address using Panasonic alarm protocol, check the "Alarm" checkbox respective to the desired IP address.

To provide notification using Panasonic alarm protocol when any of the following has occurred, check the "Diag." checkbox respective to the desired address.

When notification of the remaining space of the SD memory card has been provided (page 11)

When the SD memory card has become full

When mounting of the SD memory card has failed

To delete the registered IP address, click the [DEL] but- ton respective to the desired IP address.

Important:

Confirm that the destination IP addresses are regis- tered correctly. When a registered IP address does not exist, notification may be delayed.

48

Image 48
Contents WV-NW964 Contents About these operating instructions Trademarks and registered trademarksViewer software How to display the setup menu StepHow to operate the setup menu About the setup menu window Network setup button Schedule setup buttonMaintenance button 3SetupConfigure the basic settings of the camera Basic setup Configure the basic settings BasicAlarm status update mode Default Real timeAlarm status port Default onConfigure the settings relating to the NTP server NTP SD memory card setup SD memory card information Page Step Image capture size VGA Image capture size QvgaConfigure the settings relating to the logs LOG AlarmFTP error ManualOFF LOG tab SD memory card tab Logs and associated images SD memory Save trigger Overwrite Save logs CardSD memory Save logs CardJpeg setup Default VGA Image qualityDefault 5 fps Refresh interval JpegMPEG-4 setup Default Unicast port2 Audio Default Multicast addressDefault Multicast TTL Available value 1 DefaultDefault OFF Camera title on screen 0-9, A-Z Default 1 min Image HoldCamera title on screen Home positionStabilizer Pan·Tilt degree/Zoom ratio displayTilt Angle Image Adjust Preset PositionAuto Pan PatrolSuper Dynamic About SUPER-D 3 Super Dynamic functionDefault Auto Default on High Sensitivity upBlack & white mode Default High Wait timeDefault ATW1 Default High Chroma gain levelRed Gain Blue GainSet mask areas Register the preset position Edit the settings of the registered preset positionPosition No Position Auto panGO button Number of patrol patternLearn patrol pattern Zone setting Privacy zoneMode Zone selectConfigure the settings relating to audio Audio Audio modeDefault 32 kbps Audio bit rateMic input volume Camera to PC Default Middle Mic input interval Camera to PCDefault 40 msec Audio output volume PC to CameraConfigures the multi-screen settings Multi-screen setup IP addressNumber of characters for the IP address 1 Configure the alarm settings Alarm setup Configure the settings relating to the alarm AlarmAlarm setup Camera motion on alarm Command alarm Originating port numberAvailable port number 1 Configure the settings relating to the alarm image Alarm image setupDefault OFF Command alarm To FTP setup Alarm image FTP transmissionPost alarm Transmission interval Default 1 fps Number of imagesConfigure the settings relating to the alarm out terminal Alarm output terminal setupAUX name Set the VMD areas VMD area Default OFF Detection sensitivity StatusSet the VMD areas for each preset position Delete the VMD area set for the designated preset position Default MiddleMail notification setup Configure the settings relating to Panasonic alarm protocol Panasonic alarm protocol setupPanasonic alarm protocol User authentication Default OFF User namePassword Retype password Number of characters for the password 4 32 charHost authentication Default OFF Access levelConfigure the settings of the servers Server setup Configure the settings relating to the mail server MailConfigure the settings relating to the FTP server FTP Configuring the network settings Network setup Configure the network settings NetworkNetwork setup Default gateway Unavailable IP addresses for the default gate- wayAvailable port number 1 Default Port numbers already in use Default Manual Primary DNS, Secondary DNSWAN Configure the settings relating to Ddns Ddns Access intervalDefault OFF Host name Number of characters for the host name 1 64 charConfigure the settings relating to Snmp Snmp Default OFF Directory FTP periodic transmissionFTP periodic transmission Number of characters for the directory name 1Schedule setup How to configure the schedule settingsInterval How to delete the set schedule How to set the schedules Maintenance of the camera Maintenance Error messageCheck the system log System log Time & dateUpgrade the firmware Upgrade How to upgrade the firmwareInitialize setup data and Html data Initialize/restart the camera InitializationInitialize Html data RestartSetup screen Step Displaying the Help screenHelp screen Step Error indications relating to Smtp Error indications relating to FTPCategory Indication Description Error indications relating to Ddns Error indications relating to NTPError indications relating to login Troubleshooting Symptom Installation Guide Cause/solution Reference Pages Installation Guide Operation Instructions Symptom Solutions Reference Pages Directory structure of drive B Group LAN IP address LAN port WAN IP address Protocol Group WAN IP address Protocol LAN IP address LAN portN0907-0 3TR005323AAB
Related manuals
Manual 21 pages 50.64 Kb

WV-NW964, WV-NS954 specifications

The Panasonic WV-NW964 and WV-NS954 are advanced network cameras designed for high-performance surveillance in various applications. Both models offer a remarkable combination of features, technologies, and characteristics that make them ideal for security monitoring in both indoor and outdoor environments.

The WV-NW964 is a high-definition network camera equipped with a 1/3-inch progressive scan CCD sensor, delivering exceptional image quality with resolutions up to 1280x960 pixels. It is particularly well-suited for situations where clarity and detail are paramount, such as in retail spaces or critical infrastructure facilities. The camera supports H.264 compression technology, which allows for efficient video streaming while maintaining high image quality. This feature is particularly useful for reducing bandwidth requirements and storage costs without compromising surveillance effectiveness.

On the other hand, the WV-NS954 is a PTZ (pan-tilt-zoom) network camera that provides extensive flexibility in monitoring wide areas. With its 3x optical zoom lens, it enables users to focus on specific subjects or areas of interest without loss of detail. The camera's ability to pan 360 degrees and tilt up to 90 degrees allows for comprehensive coverage of large spaces, making it ideal for applications such as parking lots, open-air venues, and warehouses.

Both cameras are equipped with advanced features such as digital noise reduction and wide dynamic range (WDR) technology, ensuring clear images in varying lighting conditions. The WDR feature is particularly beneficial in scenarios where backlighting can obscure details, allowing for better visibility of individuals or objects even in challenging environments. Additionally, the cameras support multiple streaming formats and resolutions, providing flexibility in how video feeds are accessed and managed across different network systems.

With built-in motion detection and event-triggered recording capabilities, both cameras enhance security by providing alerts when unusual activity is detected. Users can customize alert settings based on specific needs, ensuring efficient and timely response to potential security threats. Furthermore, both models are designed with robust IP66-rated weatherproofing, making them suitable for outdoor deployment in various weather conditions without the risk of damage.

In summary, the Panasonic WV-NW964 and WV-NS954 network cameras deliver outstanding performance through their advanced imaging technologies and versatile functionalities. With features tailored for high-quality surveillance, efficient data management, and user-friendly operation, they are essential tools for enhancing security in a variety of applications.