Panasonic WV-CS574 operating instructions RS485 Connection

Page 18

• RS485 Connection

Red

Data transmission

 

Orange

 

Yellow

Data reception

Green

 

T(B) T (A) R (B) R (A)

Note:

Use the cable that is described below for RS485 site communication.

•Shielded, twisted pair cable

•Low impedance

•Wire gauge size is thicker than AWG #22 (0.33 mm2).

Alarm OUT (4-pin)

Wire color

Function

 

 

Gray

OUT 1

White

GND

Pink

OUT 2

Yellow green or light blue

GND

 

 

• ALARM IN Connections

An 8-pin and a 4-pin harness are supplied with the camera as standard accessories. Connect external sensors to this connector. Input specifications are low- active, non-voltage contact (ON when active) or open collector (Low when active). The table below shows wire colors versus pin functions.

 

Alarm IN (8-pin)

Wire color

 

Function

 

 

 

Black

 

IN 1

Brown

 

GND

Red

 

IN 2

Orange

 

GND

Yellow

 

IN 3

Light blue or green

 

GND

Blue

 

IN 4

Purple

 

GND

 

 

 

• ALARM OUT Connections

Connect an external device, for example, a buzzer or lamp, to this connector. Output specifications are low- active, open-collector and a drive capacity of 16 V DC 100 mA maximum. The table below shows wire colors versus pin functions.

Note:

Use a relay if the voltage or current of the connected device exceeds the ratings.

-18-

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Operating Instructions English Version Important Safety Instructions EnglishDisclaimer of Warranty Limitation of LiabilityFeatures AccessoriesOptional Accessories Precautions About the Camera Cleaning Function Contents Construction Wiring the Camera Installation PrecautionsCamera Installation Location Noise interference considerationsDIP Switch Settings Communication Parameters DIP SwitchBeware of high humidity Unit Number DIP Switch RS485 Communication Parameters DIP Switch Cutout in Diecast Case Camera InstallationInstalling the Camera Cutout in Decoration CoverSideway Cable Exit Top Cable ExitUninstalling the Camera Uninstalling the CameraHow to Assemble the Cable with the Accessory Connector PrecautionsAccessory Connector Information ConnectionsRS485 Connection RS485 Setup OFF ↔ 100MS ↔ 200MS ↔ 400MS ↔ 1000MSUsing the Setup Menu Setup MenuPage Setup Menu Description Special 1 Menu CameraGain Control AGC ALC Mode with BLC OFFShutter Speed Shutter Synchronization Sync10Special 2 Menu SPECIAL2 Auto Focus AF ModeRS485 Communication 11Self-diagnosis FunctionSetting Procedures Preset MenuMenu Display Position Setting Position SET To Set Panning/Tilting PositionsPan Offset To Copy a Preset ID from Another Position Preset Identification Setting Preset IDTo Enter a New Preset ID To Set the Lens Zoom and Focus PositionsTo Delete an Entered Preset ID Light Control Setting ALC/MANUALTo Change an Entered Preset ID To Set a Display Position for a Preset IDTo Return to the Preset Number Set Menu Scene File Setting Scene FilePreset Speed Setting Preset Speed To Return to the Setup MenuDeleting Preset Positions Home Position Setting HomeSelf Return Setting Self Auto Mode Selection Auto ModeAuto Pan Key Setting Auto PAN KEY SEQ Sort PatrolDigital Flip Setting Digital Flip Password VerificationSpecial 1 Menu Setting Special New PasswordPrivacy Zone Privacy Zone Proportional Pan/Tilt PROPO. P/T Zoom ratioSettings for on Nesw Setting for on UserArea Title Area Title Patrol-learn and Patrol Play Patrol To Quit EditingArea Title Editing Patrol Play with a Controller Having the Patrol Button Patrol Learn with a Controller Having Patrol ButtonPatrol-learn with a Controller not Having the Patrol Button Patrol Play with a Controller not Having the Patrol ButtonAlarm Input/Output Alarm IN/OUT CNT-CLS 1, 2 OutputCleaning Cleaning Preset Alarm Preset ALMElectronic Zoom EL-ZOOM Image Hold Image Hold Camera SettingTo Display the Camera Setting Menu Tilt Angle Tilt Angle 0 /5Move the cursor to the BLC parameter and select on Shutter Speed Setting Shutter Electronic Sensitivity Enhancement Sens UP Line-lock Sync Mode LLGain Control AGC on LOW/ MID/ HIGH/OFF Synchronization SyncAuto-Tracing White Balance Mode ATW1/ ATW2 White Balance White BALAutomatic White Balance Control Mode AWC Motion Detector Motion DETAuto Focus Setting AF Mode Auto S Auto M Auto L Manual L Manual M Manual SSpecial 2 Menu SPECIAL2 Digital Noise Reduction DNRTo Restore the Camera Default Position Refresh Reset to the Factory Default SettingsFactory Default Setting Menu SettingSpecifications HighPage Controller Operation Setting ShortcutsIris Close Troubleshooting ProblemProblem Periodically check the power cord and plug Page Panasonic Canada Inc

WV-CS574 specifications

The Panasonic WV-CS574 is a sophisticated surveillance camera renowned for its advanced features and versatile technologies designed to enhance security applications. This camera is particularly well-suited for both indoor and outdoor use, making it a popular choice for monitoring public spaces, commercial properties, and other critical areas.

One of the standout features of the WV-CS574 is its exquisite image quality. Equipped with a high-resolution 1/4-inch CCD sensor, the camera delivers clear and crisp images at a resolution of 480 TV lines. This ensures that even in challenging lighting conditions, the camera can maintain its performance, providing reliable surveillance footage for security personnel.

The WV-CS574 incorporates a powerful 18x optical zoom lens combined with a 12x digital zoom, allowing for detailed close-ups of objects or individuals that may be far from the camera. This flexibility is crucial for identifying faces and license plates from a considerable distance. The camera also supports automatic focus, which simplifies the process of capturing sharp images, minimizing the chances of blurry footage.

Panasonic ensures that the WV-CS574 can adapt to a variety of environmental conditions through features like automatic backlight compensation and digital noise reduction. These technologies work together to optimize the camera's performance in varying light situations, whether it’s bright sunlight or dimly lit areas. Additionally, the camera’s wide dynamic range (WDR) capability helps balance the exposure levels in scenes with both bright and dark areas, resulting in clear images without loss of detail.

The WV-CS574 is designed with ease of use in mind, featuring a user-friendly interface that simplifies configuration and operation. Its pan-tilt-zoom (PTZ) capabilities offer a comprehensive monitoring solution, allowing operators to remotely control the camera's movement for real-time surveillance. The camera can pan 360 degrees and tilt 90 degrees, providing extensive coverage of the monitored area.

Moreover, the Panasonic WV-CS574 is built to withstand harsh environments, with an IP66 rating for weather resistance. This makes it suitable for outdoor installations where exposure to rain, dust, and extreme temperatures is a concern.

The camera supports various video formats, ensuring compatibility with different surveillance systems. Additionally, features like alarm inputs and outputs facilitate integration with other security devices, enhancing overall monitoring capabilities. With its combination of high-quality imaging, robust design, and versatile functionality, the Panasonic WV-CS574 stands out as an exceptional choice for any surveillance needs.
Top Page Image Contents