Panasonic WV-CS574 operating instructions Auto Pan Key Setting Auto PAN KEY, SEQ Sort Patrol

Page 33

OFF: The camera pans from the starting point to the endpoint, and rotates backward to the starting point.

This movement is repeated over and over.

6.To set a dwell time

Move the cursor to DWELL TIME and select a dwell time with the joystick.

** AUTO PAN **

 

POSITION

START

 

 

END

 

SPEED

••••••••

 

L

H

ENDLESS

OFF

 

DWELL TIME

1S

 

 

PAN LIMIT

OFF

 

ZOOM LIMIT

OFF

 

RET

Dwell time changes as follows: (unit: s)

0S 1S 2S 3S

30S20S 10S 5S

7.To set pan limit ON/OFF

Move the cursor to PAN LIMIT and select ON or OFF with the joystick.

The factory default setting is OFF.

ON: Manual pan is limited from the starting point to the endpoint specified by position setting. Set ENDLESS to OFF before PAN LIMIT is set to ON.

OFF: Manual pan is not limited.

Note:

When ON is selected for PAN LIMIT, manual pan moves the camera away from the other side (PAN LIMIT) of the start-end range.

8.To set zoom limit ON/OFF

Move the cursor to ZOOM LIMIT and select ON or OFF with the joystick.

 

** ZOOM LIMIT **

ZOOM

 

 

 

→PUSH SET

RET

ON: Limits the manual zoom operation by following the procedure below.

(1)Move the cursor to ZOOM LIMIT, select ON and press the CAM (SET) button.

The ZOOM LIMIT setting menu appears.

(2)Move the cursor to ZOOM, press the CAM (SET) button, move the joystick to settle the ZOOM position and return to the AUTO PAN menu. The manual zoom operation is not available in the TELE direction beyond the settled zoom position.

 

** ZOOM LIMIT **

 

 

→ PUSH SET

ZOOM

 

 

 

 

 

 

 

U ZOOM D

 

RET

OFF: Does not limit the manual zoom operation.

Notes:

•When the panning, tilting, zooming or focusing in the SEQ, SORT or PATROL mode is controlled manually, the auto mode function should be can- celled.

To activate the auto mode, select the desired auto mode again or set a time for SELF RETURN in the SET UP menu.

•When 0S is selected, the camera stops without dwelling and starts.

•Auto refreshing may be activated during the patrol play or the auto mode to calibrate the lens position.

■Auto Pan Key Setting (AUTO PAN KEY)

This is used for assigning one of the following auto functions to the AUTO button on the controller. Pressing the AUTO button activates the assigned function after this setting.

•Move the cursor to AUTO PAN KEY and select an auto function with the joystick.

The factory default setting is AUTO PAN.

** SET UP MENU **

PRESET 1 MAP

HOME POSITION OFF

SELF RETURN OFF

AUTO MODE OFF AUTO PAN KEY AUTO PAN DIGITAL FLIP ON SPECIAL1

CAMERA

RS485 SET UP

PASSWORD LOCK OFF

The mode changes as follows:

SEQ SORT PATROL

AUTO PAN

-33-

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Operating Instructions English Version English Important Safety InstructionsLimitation of Liability Disclaimer of WarrantyFeatures AccessoriesOptional Accessories Precautions About the Camera Cleaning Function Contents Construction Camera Installation Location Installation PrecautionsWiring the Camera Noise interference considerationsDIP Switch Settings Communication Parameters DIP SwitchBeware of high humidity Unit Number DIP Switch RS485 Communication Parameters DIP Switch Installing the Camera Camera InstallationCutout in Diecast Case Cutout in Decoration CoverTop Cable Exit Sideway Cable ExitUninstalling the Camera Uninstalling the CameraAccessory Connector Information PrecautionsHow to Assemble the Cable with the Accessory Connector ConnectionsRS485 Connection OFF ↔ 100MS ↔ 200MS ↔ 400MS ↔ 1000MS RS485 SetupSetup Menu Using the Setup MenuPage Setup Menu Description Camera Special 1 MenuShutter Speed Shutter ALC Mode with BLC OFFGain Control AGC Synchronization SyncRS485 Communication Auto Focus AF Mode10Special 2 Menu SPECIAL2 11Self-diagnosis FunctionSetting Procedures Preset MenuMenu Display Position Setting Position SET To Set Panning/Tilting PositionsPan Offset To Enter a New Preset ID Preset Identification Setting Preset IDTo Copy a Preset ID from Another Position To Set the Lens Zoom and Focus PositionsTo Change an Entered Preset ID Light Control Setting ALC/MANUALTo Delete an Entered Preset ID To Set a Display Position for a Preset IDPreset Speed Setting Preset Speed Scene File Setting Scene FileTo Return to the Preset Number Set Menu To Return to the Setup MenuDeleting Preset Positions Home Position Setting HomeSelf Return Setting Self Mode Auto Mode Selection AutoSEQ Sort Patrol Auto Pan Key Setting Auto PAN KEYPassword Verification Digital Flip Setting Digital FlipSpecial 1 Menu Setting Special New PasswordPrivacy Zone Privacy Zone Zoom ratio Proportional Pan/Tilt PROPO. P/TSettings for on Nesw Setting for on UserArea Title Area Title Patrol-learn and Patrol Play Patrol To Quit EditingArea Title Editing Patrol-learn with a Controller not Having the Patrol Button Patrol Learn with a Controller Having Patrol ButtonPatrol Play with a Controller Having the Patrol Button Patrol Play with a Controller not Having the Patrol ButtonCNT-CLS 1, 2 Output Alarm Input/Output Alarm IN/OUTCleaning Cleaning Preset Alarm Preset ALMElectronic Zoom EL-ZOOM To Display the Camera Setting Menu Camera SettingImage Hold Image Hold Tilt Angle Tilt Angle 0 /5Move the cursor to the BLC parameter and select on Shutter Speed Setting Shutter Gain Control AGC on LOW/ MID/ HIGH/OFF Line-lock Sync Mode LLElectronic Sensitivity Enhancement Sens UP Synchronization SyncWhite Balance White BAL Auto-Tracing White Balance Mode ATW1/ ATW2Motion Detector Motion DET Automatic White Balance Control Mode AWCAuto S Auto M Auto L Manual L Manual M Manual S Auto Focus Setting AF ModeDigital Noise Reduction DNR Special 2 Menu SPECIAL2Reset to the Factory Default Settings To Restore the Camera Default Position RefreshMenu Setting Factory Default SettingHigh SpecificationsPage Shortcuts Controller Operation SettingIris Close Problem TroubleshootingProblem Periodically check the power cord and plug Page Panasonic Canada Inc

WV-CS574 specifications

The Panasonic WV-CS574 is a sophisticated surveillance camera renowned for its advanced features and versatile technologies designed to enhance security applications. This camera is particularly well-suited for both indoor and outdoor use, making it a popular choice for monitoring public spaces, commercial properties, and other critical areas.

One of the standout features of the WV-CS574 is its exquisite image quality. Equipped with a high-resolution 1/4-inch CCD sensor, the camera delivers clear and crisp images at a resolution of 480 TV lines. This ensures that even in challenging lighting conditions, the camera can maintain its performance, providing reliable surveillance footage for security personnel.

The WV-CS574 incorporates a powerful 18x optical zoom lens combined with a 12x digital zoom, allowing for detailed close-ups of objects or individuals that may be far from the camera. This flexibility is crucial for identifying faces and license plates from a considerable distance. The camera also supports automatic focus, which simplifies the process of capturing sharp images, minimizing the chances of blurry footage.

Panasonic ensures that the WV-CS574 can adapt to a variety of environmental conditions through features like automatic backlight compensation and digital noise reduction. These technologies work together to optimize the camera's performance in varying light situations, whether it’s bright sunlight or dimly lit areas. Additionally, the camera’s wide dynamic range (WDR) capability helps balance the exposure levels in scenes with both bright and dark areas, resulting in clear images without loss of detail.

The WV-CS574 is designed with ease of use in mind, featuring a user-friendly interface that simplifies configuration and operation. Its pan-tilt-zoom (PTZ) capabilities offer a comprehensive monitoring solution, allowing operators to remotely control the camera's movement for real-time surveillance. The camera can pan 360 degrees and tilt 90 degrees, providing extensive coverage of the monitored area.

Moreover, the Panasonic WV-CS574 is built to withstand harsh environments, with an IP66 rating for weather resistance. This makes it suitable for outdoor installations where exposure to rain, dust, and extreme temperatures is a concern.

The camera supports various video formats, ensuring compatibility with different surveillance systems. Additionally, features like alarm inputs and outputs facilitate integration with other security devices, enhancing overall monitoring capabilities. With its combination of high-quality imaging, robust design, and versatile functionality, the Panasonic WV-CS574 stands out as an exceptional choice for any surveillance needs.
Top Page Image Contents