Panasonic WV-CS574 Preset Identification Setting Preset ID, To Enter a New Preset ID

Page 28

4. To Set the Lens Zoom and Focus Positions

(1)Move the cursor to PUSH SET for ZOOM/FOCUS and press the CAM (SET) button. The ZOOM/ FOCUS setting menu appears.

** POSITION 1 **

PAN/TILT →PUSH SET ZOOM/FOCUS →PUSH SET

PAN OFFSET SET ← −0.0 →

RET

FLOOR1

DOOR

(2)Select zoom/focus positions with the joystick, and then press the CAM (SET) button.

 

** POSITION 1 **

 

PAN/TILT

→PUSH

SET

 

ZOOM/FOCUS

→PUSH

SET

 

 

 

 

 

 

 

PAN

U ZOOM D/L FOCUS R

 

→

OFFSET SET ← −0.0

RET

FLOOR1

DOOR

The positions are set and the screen returns to the position setting menu.

Notes:

•When the camera is used at a nearly horizontal angle, the focus may not be adjustable to a high level of accuracy because of the molding distor- tion of the dome cover.

•If you move the cursor to the position number and move the joystick right or left, the position number can be selected.

The selected preset position number can also be set after pressing the CAM (SET) button.

•The preset and camera IDs appear in the lower- left corner of the position setting menu after set- ting them.

5.Move the cursor to RET and press the CAM (SET) button to return to the preset setting menu.

** POSITION 1 **

PAN/TILT →PUSH SET ZOOM/FOCUS →PUSH SET

PAN OFFSET SET ← −0.0 →

RET

FLOOR1

DOOR

●Preset Identification Setting (PRESET ID)

1.Move the cursor to PRESET ID on the preset setting menu and select ON or OFF with the joystick.

The factory default setting is OFF.

PRESET NO. 1*

 

POSITION SET

 

 

PRESET ID

ON

 

ALC/MANUAL

ALC

 

DWELL TIME

10S

 

SCENE FILE

1

 

PRESET SPEED

••••••••

 

L

H

RET DEL

ON: Preset ID appears on the monitor screen.

OFF: Preset ID does not appear.

2.Press the CAM (SET) button to display the preset ID setting menu.

To Enter a New Preset ID

(1)Move the cursor to the desired character using the joystick, and press the CAM (SET) button.

(2)The selected character appears in the editing area. (The pointer in the editing area moves to the right automatically at this moment.) To enter a blank, select SPACE.

(3)Repeat the above procedure until all characters are entered.

Character Cursor

PRESET NO. 1* 0123456789

ABCDEFGHIJKLM

NOPQRSTUVWXYZCharacter

().,'":;&#!?=Area

+-*/%$

SPACE

 

 

Command

COPY POSI RET RESET

 

 

DOOR

 

 

Editing

 

 

 

 

Area

 

 

 

 

Pointer

To Copy a Preset ID from Another Position

(1)Move the cursor to COPY and press the CAM (SET) button. The preset ID in the preceding position is immediately shown. Each consecutive pressing of the CAM (SET) button displays the ID preceding the one currently displayed.

PRESET NO. 1* 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ().,'":;&#!?= +-*/%$

SPACE

COPY POSI RET RESET

DOOR............

-28-

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Operating Instructions English Version Important Safety Instructions EnglishDisclaimer of Warranty Limitation of LiabilityAccessories FeaturesOptional Accessories Precautions About the Camera Cleaning Function Contents Construction Installation Precautions Camera Installation LocationWiring the Camera Noise interference considerationsCommunication Parameters DIP Switch DIP Switch SettingsBeware of high humidity Unit Number DIP Switch RS485 Communication Parameters DIP Switch Camera Installation Installing the CameraCutout in Diecast Case Cutout in Decoration CoverSideway Cable Exit Top Cable ExitUninstalling the Camera Uninstalling the CameraPrecautions Accessory Connector InformationHow to Assemble the Cable with the Accessory Connector ConnectionsRS485 Connection RS485 Setup OFF ↔ 100MS ↔ 200MS ↔ 400MS ↔ 1000MSUsing the Setup Menu Setup MenuPage Setup Menu Description Special 1 Menu CameraALC Mode with BLC OFF Shutter Speed ShutterGain Control AGC Synchronization SyncAuto Focus AF Mode RS485 Communication10Special 2 Menu SPECIAL2 11Self-diagnosis FunctionPreset Menu Setting ProceduresMenu Display To Set Panning/Tilting Positions Position Setting Position SETPan Offset Preset Identification Setting Preset ID To Enter a New Preset IDTo Copy a Preset ID from Another Position To Set the Lens Zoom and Focus PositionsLight Control Setting ALC/MANUAL To Change an Entered Preset IDTo Delete an Entered Preset ID To Set a Display Position for a Preset IDScene File Setting Scene File Preset Speed Setting Preset SpeedTo Return to the Preset Number Set Menu To Return to the Setup MenuHome Position Setting Home Deleting Preset PositionsSelf Return Setting Self Auto Mode Selection Auto ModeAuto Pan Key Setting Auto PAN KEY SEQ Sort PatrolDigital Flip Setting Digital Flip Password VerificationNew Password Special 1 Menu Setting SpecialPrivacy Zone Privacy Zone Proportional Pan/Tilt PROPO. P/T Zoom ratioSetting for on User Settings for on NeswArea Title Area Title To Quit Editing Patrol-learn and Patrol Play PatrolArea Title Editing Patrol Learn with a Controller Having Patrol Button Patrol-learn with a Controller not Having the Patrol ButtonPatrol Play with a Controller Having the Patrol Button Patrol Play with a Controller not Having the Patrol ButtonAlarm Input/Output Alarm IN/OUT CNT-CLS 1, 2 OutputPreset Alarm Preset ALM Cleaning CleaningElectronic Zoom EL-ZOOM Camera Setting To Display the Camera Setting MenuImage Hold Image Hold Tilt Angle Tilt Angle 0 /5Move the cursor to the BLC parameter and select on Shutter Speed Setting Shutter Line-lock Sync Mode LL Gain Control AGC on LOW/ MID/ HIGH/OFFElectronic Sensitivity Enhancement Sens UP Synchronization SyncAuto-Tracing White Balance Mode ATW1/ ATW2 White Balance White BALAutomatic White Balance Control Mode AWC Motion Detector Motion DETAuto Focus Setting AF Mode Auto S Auto M Auto L Manual L Manual M Manual SSpecial 2 Menu SPECIAL2 Digital Noise Reduction DNRTo Restore the Camera Default Position Refresh Reset to the Factory Default SettingsFactory Default Setting Menu SettingSpecifications HighPage Controller Operation Setting ShortcutsIris Close Troubleshooting ProblemProblem Periodically check the power cord and plug Page Panasonic Canada Inc

WV-CS574 specifications

The Panasonic WV-CS574 is a sophisticated surveillance camera renowned for its advanced features and versatile technologies designed to enhance security applications. This camera is particularly well-suited for both indoor and outdoor use, making it a popular choice for monitoring public spaces, commercial properties, and other critical areas.

One of the standout features of the WV-CS574 is its exquisite image quality. Equipped with a high-resolution 1/4-inch CCD sensor, the camera delivers clear and crisp images at a resolution of 480 TV lines. This ensures that even in challenging lighting conditions, the camera can maintain its performance, providing reliable surveillance footage for security personnel.

The WV-CS574 incorporates a powerful 18x optical zoom lens combined with a 12x digital zoom, allowing for detailed close-ups of objects or individuals that may be far from the camera. This flexibility is crucial for identifying faces and license plates from a considerable distance. The camera also supports automatic focus, which simplifies the process of capturing sharp images, minimizing the chances of blurry footage.

Panasonic ensures that the WV-CS574 can adapt to a variety of environmental conditions through features like automatic backlight compensation and digital noise reduction. These technologies work together to optimize the camera's performance in varying light situations, whether it’s bright sunlight or dimly lit areas. Additionally, the camera’s wide dynamic range (WDR) capability helps balance the exposure levels in scenes with both bright and dark areas, resulting in clear images without loss of detail.

The WV-CS574 is designed with ease of use in mind, featuring a user-friendly interface that simplifies configuration and operation. Its pan-tilt-zoom (PTZ) capabilities offer a comprehensive monitoring solution, allowing operators to remotely control the camera's movement for real-time surveillance. The camera can pan 360 degrees and tilt 90 degrees, providing extensive coverage of the monitored area.

Moreover, the Panasonic WV-CS574 is built to withstand harsh environments, with an IP66 rating for weather resistance. This makes it suitable for outdoor installations where exposure to rain, dust, and extreme temperatures is a concern.

The camera supports various video formats, ensuring compatibility with different surveillance systems. Additionally, features like alarm inputs and outputs facilitate integration with other security devices, enhancing overall monitoring capabilities. With its combination of high-quality imaging, robust design, and versatile functionality, the Panasonic WV-CS574 stands out as an exceptional choice for any surveillance needs.
Top Page Image Contents