Panasonic WV-CS574 Position Setting Position SET, To Set Panning/Tilting Positions, Pan Offset

Page 27

Notes:

•The * mark indicates that the position number has been preset.

•The character H refers to the home position.

•The second line from the bottom shows the pre- set ID corresponding to the selected number. "DOOR" next to "ID" in the example shown right is for preset position number 1.

•Preset numbers 1 to 4 are linked to alarm inputs 1 to 4 respectively. If alarm input 1 comes in, the camera turns to preset position 1, and to other positions according to alarm input 2, 3 or 4.

●Position Setting (POSITION SET)

1.Move the cursor to POSITION SET on the preset set- ting menu and press the CAM (SET) button.

The position setting menu appears.

PRESET NO. 1*

 

 

 

 

 

POSITION SET

 

 

 

PRESET ID

ON

 

ALC/MANUAL

ALC

 

DWELL TIME

10S

 

SCENE FILE

1

 

 

PRESET SPEED

••••••••

 

L

H

RET DEL

2. To Set Panning/Tilting Positions

(1)For PAN/TILT, move the cursor to PUSH SET and press the CAM (SET) button. The PAN/TILT setting menu appears.

(2)Select panning/tilting positions with the joystick, and press the CAM (SET) button.

The positions are set and the screen returns to the position setting menu.

 

** POSITION 1

**

 

PAN/TILT

→PUSH

SET

 

ZOOM/FOCUS

→PUSH

SET

 

 

 

 

 

 

PAN

U TILT D/L PAN

R

0.0

→

OFFSET SET ←

−

RET

FLOOR1

DOOR

** POSITION 1 **

PAN/TILT →PUSH SET ZOOM/FOCUS →PUSH SET

PAN OFFSET SET ← −0.0 →

RET

FLOOR1

DOOR

3.Pan Offset

If the camera is replaced with a new one, the pan offset function is used to adjust its positions to be the same as before except patrol setting.

The system controller can download or upload the preset position data.

Caution:

The preset data for other cameras (WV-CS654 for example) is incompatible with WV-CS574. WV-CS574's preset data will be destroyed if you upload the conventional data. If this happened, reset the WV-CS574 to the default settings. Download the factory settings into the controller and upload the correct preset data newly to the initialized WV-CS574.

(1) Display the PRESET NUMBER SET menu.

** PRESET NUMBER SET **

 

1*

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

ID:DOOR

RET

(2)Select a position number for the picture to be most enlarged among the numbers with the joystick. Then press the CAM (SET) button. The position setting menu appears.

(3)Move the cursor to PAN OFFSET SET and select the right or left arrow with the joystick.

** POSITION 1 **

PAN/TILT →PUSH SET ZOOM/FOCUS →PUSH SET

PAN OFFSET SET ← −0.0 →

RET

FLOOR1

DOOR

(4)Press the CAM (SET) button until the desired offset value appears.

(5)Move the cursor to an item other than PAN OFFSET SET, and press the MON (ESC) button.

Notes:

•Further adjustment of the other positions is unnecessary. This adjustment applies to all other positions.

•Make sure to move the cursor before pressing the button in step 5. Otherwise the settings will be ignored.

•Retry the loading when the camera fails to upload or download the data.

-27-

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Operating Instructions English Version English Important Safety InstructionsLimitation of Liability Disclaimer of WarrantyFeatures AccessoriesOptional Accessories Precautions About the Camera Cleaning Function Contents Construction Noise interference considerations Installation PrecautionsCamera Installation Location Wiring the CameraDIP Switch Settings Communication Parameters DIP SwitchBeware of high humidity Unit Number DIP Switch RS485 Communication Parameters DIP Switch Cutout in Decoration Cover Camera InstallationInstalling the Camera Cutout in Diecast CaseTop Cable Exit Sideway Cable ExitUninstalling the Camera Uninstalling the CameraConnections PrecautionsAccessory Connector Information How to Assemble the Cable with the Accessory ConnectorRS485 Connection OFF ↔ 100MS ↔ 200MS ↔ 400MS ↔ 1000MS RS485 SetupSetup Menu Using the Setup MenuPage Setup Menu Description Camera Special 1 MenuSynchronization Sync ALC Mode with BLC OFFShutter Speed Shutter Gain Control AGC11Self-diagnosis Function Auto Focus AF ModeRS485 Communication 10Special 2 Menu SPECIAL2Setting Procedures Preset MenuMenu Display Position Setting Position SET To Set Panning/Tilting PositionsPan Offset To Set the Lens Zoom and Focus Positions Preset Identification Setting Preset IDTo Enter a New Preset ID To Copy a Preset ID from Another PositionTo Set a Display Position for a Preset ID Light Control Setting ALC/MANUALTo Change an Entered Preset ID To Delete an Entered Preset IDTo Return to the Setup Menu Scene File Setting Scene FilePreset Speed Setting Preset Speed To Return to the Preset Number Set MenuDeleting Preset Positions Home Position Setting HomeSelf Return Setting Self Mode Auto Mode Selection AutoSEQ Sort Patrol Auto Pan Key Setting Auto PAN KEYPassword Verification Digital Flip Setting Digital FlipSpecial 1 Menu Setting Special New PasswordPrivacy Zone Privacy Zone Zoom ratio Proportional Pan/Tilt PROPO. P/TSettings for on Nesw Setting for on UserArea Title Area Title Patrol-learn and Patrol Play Patrol To Quit EditingArea Title Editing Patrol Play with a Controller not Having the Patrol Button Patrol Learn with a Controller Having Patrol ButtonPatrol-learn with a Controller not Having the Patrol Button Patrol Play with a Controller Having the Patrol ButtonCNT-CLS 1, 2 Output Alarm Input/Output Alarm IN/OUTCleaning Cleaning Preset Alarm Preset ALMElectronic Zoom EL-ZOOM Tilt Angle Tilt Angle 0 /5 Camera SettingTo Display the Camera Setting Menu Image Hold Image HoldMove the cursor to the BLC parameter and select on Shutter Speed Setting Shutter Synchronization Sync Line-lock Sync Mode LLGain Control AGC on LOW/ MID/ HIGH/OFF Electronic Sensitivity Enhancement Sens UPWhite Balance White BAL Auto-Tracing White Balance Mode ATW1/ ATW2Motion Detector Motion DET Automatic White Balance Control Mode AWCAuto S Auto M Auto L Manual L Manual M Manual S Auto Focus Setting AF ModeDigital Noise Reduction DNR Special 2 Menu SPECIAL2Reset to the Factory Default Settings To Restore the Camera Default Position RefreshMenu Setting Factory Default SettingHigh SpecificationsPage Shortcuts Controller Operation SettingIris Close Problem TroubleshootingProblem Periodically check the power cord and plug Page Panasonic Canada Inc

WV-CS574 specifications

The Panasonic WV-CS574 is a sophisticated surveillance camera renowned for its advanced features and versatile technologies designed to enhance security applications. This camera is particularly well-suited for both indoor and outdoor use, making it a popular choice for monitoring public spaces, commercial properties, and other critical areas.

One of the standout features of the WV-CS574 is its exquisite image quality. Equipped with a high-resolution 1/4-inch CCD sensor, the camera delivers clear and crisp images at a resolution of 480 TV lines. This ensures that even in challenging lighting conditions, the camera can maintain its performance, providing reliable surveillance footage for security personnel.

The WV-CS574 incorporates a powerful 18x optical zoom lens combined with a 12x digital zoom, allowing for detailed close-ups of objects or individuals that may be far from the camera. This flexibility is crucial for identifying faces and license plates from a considerable distance. The camera also supports automatic focus, which simplifies the process of capturing sharp images, minimizing the chances of blurry footage.

Panasonic ensures that the WV-CS574 can adapt to a variety of environmental conditions through features like automatic backlight compensation and digital noise reduction. These technologies work together to optimize the camera's performance in varying light situations, whether it’s bright sunlight or dimly lit areas. Additionally, the camera’s wide dynamic range (WDR) capability helps balance the exposure levels in scenes with both bright and dark areas, resulting in clear images without loss of detail.

The WV-CS574 is designed with ease of use in mind, featuring a user-friendly interface that simplifies configuration and operation. Its pan-tilt-zoom (PTZ) capabilities offer a comprehensive monitoring solution, allowing operators to remotely control the camera's movement for real-time surveillance. The camera can pan 360 degrees and tilt 90 degrees, providing extensive coverage of the monitored area.

Moreover, the Panasonic WV-CS574 is built to withstand harsh environments, with an IP66 rating for weather resistance. This makes it suitable for outdoor installations where exposure to rain, dust, and extreme temperatures is a concern.

The camera supports various video formats, ensuring compatibility with different surveillance systems. Additionally, features like alarm inputs and outputs facilitate integration with other security devices, enhancing overall monitoring capabilities. With its combination of high-quality imaging, robust design, and versatile functionality, the Panasonic WV-CS574 stands out as an exceptional choice for any surveillance needs.
Top Page Image Contents