Panasonic WV-CS574 operating instructions Patrol Learn with a Controller Having Patrol Button

Page 39

•DIGITAL FLIP

•PRIVACY ZONE

•CAMERA ID

•PROPO.PT

•PAN LIMIT

•ZOOM LIMIT

•TILT ANGLE

•CLEANING

After starting the patrol-learn, the following manual operations are stored.

•PAN/TILT/ZOOM/FOCUS operation

•IRIS operation

•Preset positioning

The auto focus function is disabled during the patrol operation. Under such circumstances, the camera goes out of focus when zooming in with WIDE selected resulting from a characteristic of a zoom lens. For storing the zoom operation, start with the TELE mode keeps the camera in focus.

The patrol operation ranges from the horizontal direction to the downward direction. The digital flip function is disabled (page 34).

2.Open the SET UP menu and move the cursor to SPECIAL 1. For PATROL, select LEARN, PLAY or STOP with the joystick.

The factory default setting is STOP.

LEARN: A series of manual operations is stored.

PLAY: Stored operations are reproduced.

STOP: LEARN or PLAY is not activated.

PATROL LEARN with a Controller Having PATROL Button

1.Press the PATROL button and the CAM (SET) button simultaneously to start patrol-learn. The setup menu displays "LEARNING(60S)", and the starting points are stored. (unit: s)

LEARNING(60S)

2.Operate patrol-learn manually. The operation data is stored. The countdown to complete learning is dis- played.

3.To stop patrol-learn, press the PATROL STOP but- ton.

Patrol-learn with a Controller not Having the PATROL Button

1.Close the SET UP or SPECIAL 1 menu to start PATROL LEARN. Starting point parameters are stored and "LEARNING(60S)" is displayed on the monitor.

2.Operate patrol-learn manually.

3.Open the SET UP menu to stop learning.

Notes:

•It is recommended to set PAN LIMIT to ON for patrol-learn. Otherwise PAN LIMIT is invalid in playback.

•If the power fails in the patrol-learn mode, start the patrol-learn function again from the starting point.

•LEARN also stops 1 minute after starting if the memory is full.

•Auto refreshing may be activated in the patrol play mode or the auto mode to calibrate the lens position.

Patrol Play with a Controller Having the PATROL Button

1.Press the PATROL PLAY button. The camera turns to the starting point and reproduces the operations stored in the memory. Iris operation is valid only in the playback mode.

2.Press the PATROL STOP button and PROGRAM button simultaneously to stop playback or press any manual operation button (e.g., PAN/TILT/ ZOOM/ FOCUS) except the iris buttons.

Patrol Play with a Controller not Having the PATROL Button

1.Select patrol play in the setup menu, and then close the menu. The camera turns to the starting point and the operations stored in memory are reproduced. Iris operation is valid only in the playback mode.

2.Open the SET UP menu, or press any of manual operation button (e.g., PAN/TILT/ZOOM/FOCUS) except the iris buttons to stop playback.

Patrol Play with the AUTO PAN Button

1.If the PATROL PLAY function is assigned to the AUTO PAN button, press the AUTO PAN button to turn the camera back to the starting point and to reproduce the operation data stored in the memory.

2.To stop playback, press the PATROL STOP button or any manual operation button (e.g., PAN/TILT/ ZOOM/FOCUS) except the iris buttons.

Notes:

•In the patrol play mode, the camera movement may occasionally deviate from the entered routine when the routine includes a move to a preset position. If this happens, re-enter the routine of manual opera- tions for patrol-learn.

•In the patrol play mode, black and white automatic switching does not work.

•In the patrol play mode, when the power of the con- troller is turned on or off, the patrol play stops. In this case, press the PATROL PLAY button again. (If SELF RETURN is set to ON, the patrol play will start again after elapsing the setting return time.)

-39-

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Operating Instructions English Version English Important Safety InstructionsLimitation of Liability Disclaimer of WarrantyFeatures AccessoriesOptional Accessories Precautions About the Camera Cleaning Function Contents Construction Noise interference considerations Installation PrecautionsCamera Installation Location Wiring the CameraDIP Switch Settings Communication Parameters DIP SwitchBeware of high humidity Unit Number DIP Switch RS485 Communication Parameters DIP Switch Cutout in Decoration Cover Camera InstallationInstalling the Camera Cutout in Diecast CaseTop Cable Exit Sideway Cable ExitUninstalling the Camera Uninstalling the CameraConnections PrecautionsAccessory Connector Information How to Assemble the Cable with the Accessory ConnectorRS485 Connection OFF ↔ 100MS ↔ 200MS ↔ 400MS ↔ 1000MS RS485 SetupSetup Menu Using the Setup MenuPage Setup Menu Description Camera Special 1 MenuSynchronization Sync ALC Mode with BLC OFFShutter Speed Shutter Gain Control AGC11Self-diagnosis Function Auto Focus AF ModeRS485 Communication 10Special 2 Menu SPECIAL2Setting Procedures Preset MenuMenu Display Position Setting Position SET To Set Panning/Tilting PositionsPan Offset To Set the Lens Zoom and Focus Positions Preset Identification Setting Preset IDTo Enter a New Preset ID To Copy a Preset ID from Another PositionTo Set a Display Position for a Preset ID Light Control Setting ALC/MANUALTo Change an Entered Preset ID To Delete an Entered Preset IDTo Return to the Setup Menu Scene File Setting Scene FilePreset Speed Setting Preset Speed To Return to the Preset Number Set MenuDeleting Preset Positions Home Position Setting HomeSelf Return Setting Self Mode Auto Mode Selection AutoSEQ Sort Patrol Auto Pan Key Setting Auto PAN KEYPassword Verification Digital Flip Setting Digital FlipSpecial 1 Menu Setting Special New PasswordPrivacy Zone Privacy Zone Zoom ratio Proportional Pan/Tilt PROPO. P/TSettings for on Nesw Setting for on UserArea Title Area Title Patrol-learn and Patrol Play Patrol To Quit EditingArea Title Editing Patrol Play with a Controller not Having the Patrol Button Patrol Learn with a Controller Having Patrol ButtonPatrol-learn with a Controller not Having the Patrol Button Patrol Play with a Controller Having the Patrol ButtonCNT-CLS 1, 2 Output Alarm Input/Output Alarm IN/OUTCleaning Cleaning Preset Alarm Preset ALMElectronic Zoom EL-ZOOM Tilt Angle Tilt Angle 0 /5 Camera SettingTo Display the Camera Setting Menu Image Hold Image HoldMove the cursor to the BLC parameter and select on Shutter Speed Setting Shutter Synchronization Sync Line-lock Sync Mode LLGain Control AGC on LOW/ MID/ HIGH/OFF Electronic Sensitivity Enhancement Sens UPWhite Balance White BAL Auto-Tracing White Balance Mode ATW1/ ATW2Motion Detector Motion DET Automatic White Balance Control Mode AWCAuto S Auto M Auto L Manual L Manual M Manual S Auto Focus Setting AF ModeDigital Noise Reduction DNR Special 2 Menu SPECIAL2Reset to the Factory Default Settings To Restore the Camera Default Position RefreshMenu Setting Factory Default SettingHigh SpecificationsPage Shortcuts Controller Operation SettingIris Close Problem TroubleshootingProblem Periodically check the power cord and plug Page Panasonic Canada Inc

WV-CS574 specifications

The Panasonic WV-CS574 is a sophisticated surveillance camera renowned for its advanced features and versatile technologies designed to enhance security applications. This camera is particularly well-suited for both indoor and outdoor use, making it a popular choice for monitoring public spaces, commercial properties, and other critical areas.

One of the standout features of the WV-CS574 is its exquisite image quality. Equipped with a high-resolution 1/4-inch CCD sensor, the camera delivers clear and crisp images at a resolution of 480 TV lines. This ensures that even in challenging lighting conditions, the camera can maintain its performance, providing reliable surveillance footage for security personnel.

The WV-CS574 incorporates a powerful 18x optical zoom lens combined with a 12x digital zoom, allowing for detailed close-ups of objects or individuals that may be far from the camera. This flexibility is crucial for identifying faces and license plates from a considerable distance. The camera also supports automatic focus, which simplifies the process of capturing sharp images, minimizing the chances of blurry footage.

Panasonic ensures that the WV-CS574 can adapt to a variety of environmental conditions through features like automatic backlight compensation and digital noise reduction. These technologies work together to optimize the camera's performance in varying light situations, whether it’s bright sunlight or dimly lit areas. Additionally, the camera’s wide dynamic range (WDR) capability helps balance the exposure levels in scenes with both bright and dark areas, resulting in clear images without loss of detail.

The WV-CS574 is designed with ease of use in mind, featuring a user-friendly interface that simplifies configuration and operation. Its pan-tilt-zoom (PTZ) capabilities offer a comprehensive monitoring solution, allowing operators to remotely control the camera's movement for real-time surveillance. The camera can pan 360 degrees and tilt 90 degrees, providing extensive coverage of the monitored area.

Moreover, the Panasonic WV-CS574 is built to withstand harsh environments, with an IP66 rating for weather resistance. This makes it suitable for outdoor installations where exposure to rain, dust, and extreme temperatures is a concern.

The camera supports various video formats, ensuring compatibility with different surveillance systems. Additionally, features like alarm inputs and outputs facilitate integration with other security devices, enhancing overall monitoring capabilities. With its combination of high-quality imaging, robust design, and versatile functionality, the Panasonic WV-CS574 stands out as an exceptional choice for any surveillance needs.
Top Page Image Contents