Panasonic WV-CS574 operating instructions Proportional Pan/Tilt PROPO. P/T, Zoom ratio

•When 5 privacy zones or more are framed on the displayed screen in the same time, the whole screen will be masked. In this case, diminish the number of the zones and set the privacy zones larger.

•The privacy zone may appear on the monitor screen depending on the direction of the camera.

•The privacy zone function will not work at start-up immediately after turning the power on.

3. To register a new zone

3-1 For PAN/TILT, move the cursor to PUSH SET and press the CAM (SET) button.

** ZONE NUMBER 3*/8 **

PAN/TILT →PUSH SET ZOOM/FOCUS →PUSH SET

ZONE SCALE	••••••••
SET DEL	L	H
RET

3-2 Adjust the pan and tilt position so that the desired position comes into the zone frame with the joystick.

** ZONE NUMBER 3*/8 **

PAN/TILT →PUSH SET ZOOM/FOCUS →PUSH SET

U TILT D/L PAN R

** ZONE NUMBER 3*/8 **

PAN/TILT →PUSH SET ZOOM/FOCUS →PUSH SET

ZONE SCALE	••••••••
SET DEL	L	H
RET

Moving the joystick in the L direction decreases the zone frame, and moving it in the H direction increases it. However, the aspect ratio is fixed at 3 to 4.

The privacy zone setting has been completed. The menu returns to the ZONE NUMBER setting menu.

3-6

•To complete new settings and repeat other set- tings, move the cursor to SET and press the CAM (SET) button. The ZONE NUMBER setting menu reappears.

•To cancel new settings and return to the SPE- CIAL 1 menu, move the cursor to DEL and press the CAM (SET) button. New settings are not reg- istered.

•To complete new settings and return to the SPE- CIAL 1 menu, move the cursor to RET and press the CAM (SET) button.

ZONE SCALE	••••••••
SET DEL	L	H
RET

3-3 For ZOOM/FOCUS, move the cursor to PUSH SET , and press the CAM (SET) button.

** ZONE NUMBER 3*/8 **
PAN/TILT		→PUSH SET
ZOOM/FOCUS		→PUSH SET
	U ZOOM D/L FOCUS R
ZONE SCALE		••••••••
SET DEL		L	H
RET

3-4 Adjust zoom and focus, and press the CAM (SET) button.

Zoom can be adjusted within the range of 1 to 10 magnifications.

3-5 Move the cursor to ZONE SCALE, and move the joystick to the right or left to adjust the zone frame. Press the CAM (SET) button after the adjustment.

●Proportional Pan/Tilt (PROPO. P/T)

Move the cursor to PROPO. P/T and select either ON or OFF with the joystick.

Factory default setting: ON

** SPECIAL	1 **
PRIVACY ZONE	OFF
PROPO.P/T	ON
AREA TITLE	ON(USER)
PATROL	STOP
ALARM IN/OUT
CLEANING	OFF
EL-ZOOM	ON
PRESET ALM	OFF
IMAGE HOLD	OFF
TILT ANGLE	0°
RET

ON: Pan/tilt speed is in inverse proportion to the zoom ratio as follows:

Zoom ratio	Speed level
x1	7	(fastest)
x2	5
x4	3
x8	1
x15 or more	0	(slowest)

* The speed level values are approximate.

OFF: The speed is constant at the fastest level regardless of the zoom ratio.

-36-