Panasonic WV-CS574 Cleaning Cleaning, Electronic Zoom EL-ZOOM, Preset Alarm Preset ALM

Page 41

●Cleaning (CLEANING)

With CLEANING in the ON position, the camera’s built- in electromechanical contacts are cleaned at regular intervals (approx. every 7 days).

A dry contact adversely affects picture quality and motors operation.

1.Move the cursor to CLEANING and select ON or OFF with the joystick.

** SPECIAL

1 **

PRIVACY ZONE

OFF

PROPO.P/T

ON

AREA TITLE

ON(USER)

PATROL

STOP

ALARM IN/OUT

 

 

CLEANING

ON

 

EL-ZOOM

ON

PRESET ALM

OFF

IMAGE HOLD

OFF

TILT ANGLE

0°

 

RET

 

 

ON: The contacts are cleaned for approx. 1 minute. "CLEANING" disappears when the cleaning process is completed.

CLEANING

OFF: No contact cleaning.

Note:

To download or upload preset data to the system controller, set the cleaning function to “OFF”. If the cleaning function is activated during the uploading or downloading process, the upload- ing or downloading fails.

●Electronic Zoom (EL-ZOOM)

The electronic zoom magnifies a scene 10-fold. With a 22-fold optical zoom lens, the camera is capable of 220-fold zoom.

1.Move the cursor to EL-ZOOM and select ON or OFF with the joystick, and then press the CAM (SET) but- ton.

** SPECIAL

1 **

PRIVACY ZONE

OFF

PROPO.P/T

ON

AREA TITLE

ON(USER)

PATROL

STOP

ALARM IN/OUT

 

 

CLEANING

ON

EL-ZOOM

ON

 

PRESET ALM

OFF

IMAGE HOLD

OFF

TILT ANGLE

0°

 

RET

 

 

ON: 10 - fold electronic zoom is available with the ZOOM switch on the controller.

OFF: The electronic zoom function is not used.

Notes:

•A scene magnified by the electronic zoom func- tion may be inferior in picture quality to a non- magnified one.

•The electronic zoom does not function in the pre- set position setting mode.

•When trying to set preset positions directly from the WV-CU360 System Controller while ON is set for the electronic zoom function and the dis- played scene is magnified at more than x22, the INHIBIT indication will be displayed. In this case, you need to set the electronic zoom function temporarily to OFF.

●Preset Alarm (PRESET ALM)

An alarm output is sent when the camera moves to the designated position depending on the mode.

1.Move the cursor to PRESET ALM and select ON or OFF.

** SPECIAL

1 **

PRIVACY ZONE

OFF

PROPO.P/T

ON

AREA TITLE

ON(USER)

PATROL

STOP

ALARM IN/OUT

 

 

 

CLEANING

OFF

EL-ZOOM

ON

PRESET ALM

 

ON

 

IMAGE HOLD

 

OFF

TILT ANGLE

0°

 

RET

 

 

 

ON: Alarm signals are output in the following cases.

•When a preset positioning sequence is complet- ed while AUTO MODE is set to SEQ.

•When a preset positioning sequence is complet- ed while AUTO MODE is set to SORT.

•When the self-return function has returned the camera to its home position.

•Positioning is completed for a position request command.

•Positioning to the designated point is completed for ALARM IN/OUT.

•When positioning to the starting point is complet- ed while AUTO MODE is set to AUTO PAN.

•When positioning to the starting point is complet- ed while PATROL is set to PLAY.

OFF: Alarm signals are not output.

Notes:

•Select OFF when the camera downloads or uploads the preset data.

•When selecting "ON", set "AUTO" for "ALARM DATA" on the RS485 SETUP menu (page 19).

-41-

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Operating Instructions English Version English Important Safety InstructionsLimitation of Liability Disclaimer of WarrantyOptional Accessories FeaturesAccessories Precautions About the Camera Cleaning Function Contents Construction Camera Installation Location Installation PrecautionsWiring the Camera Noise interference considerationsBeware of high humidity DIP Switch SettingsCommunication Parameters DIP Switch Unit Number DIP Switch RS485 Communication Parameters DIP Switch Installing the Camera Camera InstallationCutout in Diecast Case Cutout in Decoration CoverTop Cable Exit Sideway Cable ExitUninstalling the Camera Uninstalling the CameraAccessory Connector Information PrecautionsHow to Assemble the Cable with the Accessory Connector ConnectionsRS485 Connection OFF ↔ 100MS ↔ 200MS ↔ 400MS ↔ 1000MS RS485 SetupSetup Menu Using the Setup MenuPage Setup Menu Description Camera Special 1 MenuShutter Speed Shutter ALC Mode with BLC OFFGain Control AGC Synchronization SyncRS485 Communication Auto Focus AF Mode10Special 2 Menu SPECIAL2 11Self-diagnosis FunctionMenu Display Setting ProceduresPreset Menu Pan Offset Position Setting Position SETTo Set Panning/Tilting Positions To Enter a New Preset ID Preset Identification Setting Preset IDTo Copy a Preset ID from Another Position To Set the Lens Zoom and Focus PositionsTo Change an Entered Preset ID Light Control Setting ALC/MANUALTo Delete an Entered Preset ID To Set a Display Position for a Preset IDPreset Speed Setting Preset Speed Scene File Setting Scene FileTo Return to the Preset Number Set Menu To Return to the Setup MenuSelf Return Setting Self Deleting Preset PositionsHome Position Setting Home Mode Auto Mode Selection AutoSEQ Sort Patrol Auto Pan Key Setting Auto PAN KEYPassword Verification Digital Flip Setting Digital FlipPrivacy Zone Privacy Zone Special 1 Menu Setting SpecialNew Password Zoom ratio Proportional Pan/Tilt PROPO. P/TArea Title Area Title Settings for on NeswSetting for on User Area Title Editing Patrol-learn and Patrol Play PatrolTo Quit Editing Patrol-learn with a Controller not Having the Patrol Button Patrol Learn with a Controller Having Patrol ButtonPatrol Play with a Controller Having the Patrol Button Patrol Play with a Controller not Having the Patrol ButtonCNT-CLS 1, 2 Output Alarm Input/Output Alarm IN/OUTElectronic Zoom EL-ZOOM Cleaning CleaningPreset Alarm Preset ALM To Display the Camera Setting Menu Camera SettingImage Hold Image Hold Tilt Angle Tilt Angle 0 /5Move the cursor to the BLC parameter and select on Shutter Speed Setting Shutter Gain Control AGC on LOW/ MID/ HIGH/OFF Line-lock Sync Mode LLElectronic Sensitivity Enhancement Sens UP Synchronization SyncWhite Balance White BAL Auto-Tracing White Balance Mode ATW1/ ATW2Motion Detector Motion DET Automatic White Balance Control Mode AWCAuto S Auto M Auto L Manual L Manual M Manual S Auto Focus Setting AF ModeDigital Noise Reduction DNR Special 2 Menu SPECIAL2Reset to the Factory Default Settings To Restore the Camera Default Position RefreshMenu Setting Factory Default SettingHigh SpecificationsPage Shortcuts Controller Operation SettingIris Close Problem TroubleshootingProblem Periodically check the power cord and plug Page Panasonic Canada Inc

WV-CS574 specifications

The Panasonic WV-CS574 is a sophisticated surveillance camera renowned for its advanced features and versatile technologies designed to enhance security applications. This camera is particularly well-suited for both indoor and outdoor use, making it a popular choice for monitoring public spaces, commercial properties, and other critical areas.

One of the standout features of the WV-CS574 is its exquisite image quality. Equipped with a high-resolution 1/4-inch CCD sensor, the camera delivers clear and crisp images at a resolution of 480 TV lines. This ensures that even in challenging lighting conditions, the camera can maintain its performance, providing reliable surveillance footage for security personnel.

The WV-CS574 incorporates a powerful 18x optical zoom lens combined with a 12x digital zoom, allowing for detailed close-ups of objects or individuals that may be far from the camera. This flexibility is crucial for identifying faces and license plates from a considerable distance. The camera also supports automatic focus, which simplifies the process of capturing sharp images, minimizing the chances of blurry footage.

Panasonic ensures that the WV-CS574 can adapt to a variety of environmental conditions through features like automatic backlight compensation and digital noise reduction. These technologies work together to optimize the camera's performance in varying light situations, whether it’s bright sunlight or dimly lit areas. Additionally, the camera’s wide dynamic range (WDR) capability helps balance the exposure levels in scenes with both bright and dark areas, resulting in clear images without loss of detail.

The WV-CS574 is designed with ease of use in mind, featuring a user-friendly interface that simplifies configuration and operation. Its pan-tilt-zoom (PTZ) capabilities offer a comprehensive monitoring solution, allowing operators to remotely control the camera's movement for real-time surveillance. The camera can pan 360 degrees and tilt 90 degrees, providing extensive coverage of the monitored area.

Moreover, the Panasonic WV-CS574 is built to withstand harsh environments, with an IP66 rating for weather resistance. This makes it suitable for outdoor installations where exposure to rain, dust, and extreme temperatures is a concern.

The camera supports various video formats, ensuring compatibility with different surveillance systems. Additionally, features like alarm inputs and outputs facilitate integration with other security devices, enhancing overall monitoring capabilities. With its combination of high-quality imaging, robust design, and versatile functionality, the Panasonic WV-CS574 stands out as an exceptional choice for any surveillance needs.
Top Page Image Contents