Panasonic WV-CS574 Motion Detector Motion DET, Automatic White Balance Control Mode AWC

Page 47

(2) Automatic White Balance Control Mode (AWC)

1.Move the cursor to WHITE BAL and select AWC → PUSH SET with the joystick.

** SET UP **

CAMERA ID

OFF

ALC/MANUAL

ALC

SHUTTER

 

AUTO

AGC

 

ON(MID)

SENS UP

 

OFF

SYNC

 

INT

WHITE BAL

AWC→PUSH SET

MOTION DET

OFF

AF MODE

 

AUTO L

RET

SPECIAL2

2.Press the CAM (SET) button to start the white bal- ance setup. PUSH SET is highlighted to indicate that white balance is being set.

3.PUSH SET returns to normal when balance setting is completed.

4.For fine adjustment of the AWC, move the cursor to AWC and press the CAM (SET) button. The AWC fine adjustment menu appears on the monitor screen.

** AWC **

R••••••••

- +

B••••••••

- +

RET

5.Move the cursor to RET with the joystick and press the CAM (SET) button to return to the SET UP menu.

●Motion Detector (MOTION DET)

1.Move the cursor to MOTION DET and select ON or OFF with the joystick.

** SET UP **

CAMERA ID

OFF

ALC/MANUAL

ALC

SHUTTER

 

AUTO

AGC

 

ON(MID)

SENS UP

 

OFF

SYNC

 

INT

WHITE BAL

ATW1

MOTION DET

ON

 

AF MODE

 

AUTO L

RET

SPECIAL2

2.If ON is selected, press the CAM (SET) button. The MOTION DETECT menu appears.

You can mask the areas in this menu.

3.Move the cursor to MASK SET and press the CAM (SET) button. 48 mask areas appear on the monitor screen.

Refer to Light Control Setting on page 43 for mask- ing operations.

4.After masking areas, press the MON (ESC) button. The MOTION DETECT menu appears on the monitor screen.

5.Move the cursor to ALARM and select ON or OFF with the joystick.

ON: The alarm signal is supplied while the display mode is activated.

OFF: The alarm signal is not supplied while the dis- play mode is activated.

6.Move the cursor to DISPLAY MODE.

Press the CAM (SET) button to see the present set- ting. The areas that detect the motions blink.

7.Move the cursor to LEVEL with the joystick.

Obtain the optimum detection level with the joystick.

** MOTION DETECT **

LEVEL

••••••••

 

 

-

+

DWELL TIME

 

2S

DISPLAY MODE

 

 

 

ALARM

 

OFF

MASK SET

 

 

 

RECOVER TIME

 

1MIN

RET

 

 

 

Note:

Repeat the above procedure until you obtain the adjusted results.

8.Dwell Time

Move the cursor to DWELL TIME, and select a time with the Joystick.

When the time specified here elapses after motion detection, the camera will notify the connected device of the alarm activation. The default setting is 2 seconds.

Selectable times (unit: s): 2S, 5S, 10S, 30S

9.Move the cursor to RECOVER TIME with the joystick. You can select the following recover times. (unit: min)

1MIN 2MIN3MIN 5MIN 10MIN

OFF 60MIN 30MIN20MIN

-47-

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Operating Instructions English Version English Important Safety InstructionsLimitation of Liability Disclaimer of WarrantyOptional Accessories FeaturesAccessories Precautions About the Camera Cleaning Function Contents Construction Noise interference considerations Installation PrecautionsCamera Installation Location Wiring the CameraBeware of high humidity DIP Switch SettingsCommunication Parameters DIP Switch Unit Number DIP Switch RS485 Communication Parameters DIP Switch Cutout in Decoration Cover Camera InstallationInstalling the Camera Cutout in Diecast CaseTop Cable Exit Sideway Cable ExitUninstalling the Camera Uninstalling the CameraConnections PrecautionsAccessory Connector Information How to Assemble the Cable with the Accessory ConnectorRS485 Connection OFF ↔ 100MS ↔ 200MS ↔ 400MS ↔ 1000MS RS485 SetupSetup Menu Using the Setup MenuPage Setup Menu Description Camera Special 1 MenuSynchronization Sync ALC Mode with BLC OFFShutter Speed Shutter Gain Control AGC11Self-diagnosis Function Auto Focus AF ModeRS485 Communication 10Special 2 Menu SPECIAL2Menu Display Setting ProceduresPreset Menu Pan Offset Position Setting Position SETTo Set Panning/Tilting Positions To Set the Lens Zoom and Focus Positions Preset Identification Setting Preset IDTo Enter a New Preset ID To Copy a Preset ID from Another PositionTo Set a Display Position for a Preset ID Light Control Setting ALC/MANUALTo Change an Entered Preset ID To Delete an Entered Preset IDTo Return to the Setup Menu Scene File Setting Scene FilePreset Speed Setting Preset Speed To Return to the Preset Number Set MenuSelf Return Setting Self Deleting Preset PositionsHome Position Setting Home Mode Auto Mode Selection AutoSEQ Sort Patrol Auto Pan Key Setting Auto PAN KEYPassword Verification Digital Flip Setting Digital FlipPrivacy Zone Privacy Zone Special 1 Menu Setting SpecialNew Password Zoom ratio Proportional Pan/Tilt PROPO. P/TArea Title Area Title Settings for on NeswSetting for on User Area Title Editing Patrol-learn and Patrol Play PatrolTo Quit Editing Patrol Play with a Controller not Having the Patrol Button Patrol Learn with a Controller Having Patrol ButtonPatrol-learn with a Controller not Having the Patrol Button Patrol Play with a Controller Having the Patrol ButtonCNT-CLS 1, 2 Output Alarm Input/Output Alarm IN/OUTElectronic Zoom EL-ZOOM Cleaning CleaningPreset Alarm Preset ALM Tilt Angle Tilt Angle 0 /5 Camera SettingTo Display the Camera Setting Menu Image Hold Image HoldMove the cursor to the BLC parameter and select on Shutter Speed Setting Shutter Synchronization Sync Line-lock Sync Mode LLGain Control AGC on LOW/ MID/ HIGH/OFF Electronic Sensitivity Enhancement Sens UPWhite Balance White BAL Auto-Tracing White Balance Mode ATW1/ ATW2Motion Detector Motion DET Automatic White Balance Control Mode AWCAuto S Auto M Auto L Manual L Manual M Manual S Auto Focus Setting AF ModeDigital Noise Reduction DNR Special 2 Menu SPECIAL2Reset to the Factory Default Settings To Restore the Camera Default Position RefreshMenu Setting Factory Default SettingHigh SpecificationsPage Shortcuts Controller Operation SettingIris Close Problem TroubleshootingProblem Periodically check the power cord and plug Page Panasonic Canada Inc

WV-CS574 specifications

The Panasonic WV-CS574 is a sophisticated surveillance camera renowned for its advanced features and versatile technologies designed to enhance security applications. This camera is particularly well-suited for both indoor and outdoor use, making it a popular choice for monitoring public spaces, commercial properties, and other critical areas.

One of the standout features of the WV-CS574 is its exquisite image quality. Equipped with a high-resolution 1/4-inch CCD sensor, the camera delivers clear and crisp images at a resolution of 480 TV lines. This ensures that even in challenging lighting conditions, the camera can maintain its performance, providing reliable surveillance footage for security personnel.

The WV-CS574 incorporates a powerful 18x optical zoom lens combined with a 12x digital zoom, allowing for detailed close-ups of objects or individuals that may be far from the camera. This flexibility is crucial for identifying faces and license plates from a considerable distance. The camera also supports automatic focus, which simplifies the process of capturing sharp images, minimizing the chances of blurry footage.

Panasonic ensures that the WV-CS574 can adapt to a variety of environmental conditions through features like automatic backlight compensation and digital noise reduction. These technologies work together to optimize the camera's performance in varying light situations, whether it’s bright sunlight or dimly lit areas. Additionally, the camera’s wide dynamic range (WDR) capability helps balance the exposure levels in scenes with both bright and dark areas, resulting in clear images without loss of detail.

The WV-CS574 is designed with ease of use in mind, featuring a user-friendly interface that simplifies configuration and operation. Its pan-tilt-zoom (PTZ) capabilities offer a comprehensive monitoring solution, allowing operators to remotely control the camera's movement for real-time surveillance. The camera can pan 360 degrees and tilt 90 degrees, providing extensive coverage of the monitored area.

Moreover, the Panasonic WV-CS574 is built to withstand harsh environments, with an IP66 rating for weather resistance. This makes it suitable for outdoor installations where exposure to rain, dust, and extreme temperatures is a concern.

The camera supports various video formats, ensuring compatibility with different surveillance systems. Additionally, features like alarm inputs and outputs facilitate integration with other security devices, enhancing overall monitoring capabilities. With its combination of high-quality imaging, robust design, and versatile functionality, the Panasonic WV-CS574 stands out as an exceptional choice for any surveillance needs.
Top Page Image Contents