Panasonic WV-CS574 operating instructions Digital Flip Setting Digital Flip, Password Verification

Page 34

AUTO PAN: Assigns the auto panning function to the button.

SEQ: Assigns the SEQUENCE function to the but- ton.

SORT: Assigns the SORT function to the button.

PATROL: Assigns the PATROL PLAY function to the button.

Note:

AUTO PAN LED on the controller does not light if something other than AUTO PAN is assigned. AUTO PAN does not stop with the AUTO PAN button.

If PASSWORD LOCK is set to ON, you cannot operate AUTO PAN, SEQ, SORT, and PATROL even by pressing the AUTO button.

■Digital Flip Setting (DIGITAL FLIP)

Move the cursor to DIGITAL FLIP and select ON or OFF with the joystick.

** SET UP MENU **

PRESET 1 MAP

HOME POSITION OFF

SELF RETURN OFF

AUTO MODE OFF AUTO PAN KEY AUTO PAN DIGITAL FLIP ON SPECIAL1

CAMERA

RS485 SET UP

PASSWORD LOCK OFF

OFF: The tilt range is limited from 0 ° to 90 °.

ON: The digital flip function allows the tilt angle to widen up to 180 °. The image on the monitor screen is flipped horizontally and vertically at the tilt angle of approx. 135 ° (If the camera is installed on a ceiling).

Note:

The tilt range narrows from 0 ° to 90 ° if PAN LIMIT is set to ON.

Notes:

•Digital flip functions while moving the joystick down- wards. In case of moving the joystick to other direc- tions, it does not function.

•When OFF is selected for DIGITAL FLIP, the follow- ing operations are required to move the camera 180 ° vertically.

1)Move the joystick downwards to aim the camera down.

2)Move the joystick to the right or left to rotate the camera 180 ° horizontally.

3)Move the joystick upwards.

•To set the preset position directly from WV-CU360 System Controller, it is temporarily required to set both the electronic zoom function and digital flip function to OFF.

Tilt range setting is disabled between 90 ° and 185 °.

●Password Lock (PASSWORD LOCK)

Caution:

For security, do not operate your VCR for recording while the password menus are displayed on the monitor.

A 3-digit number is used for a password to limit access to all settings.

1.Move the cursor to PASSWORD LOCK, then select ON or OFF with the joystick.

** SET UP MENU **

PRESET 1 MAP

HOME POSITION OFF

SELF RETURN OFF

AUTO MODE OFF AUTO PAN KEY AUTO PAN DIGITAL FLIP ON SPECIAL1

CAMERA RS485 SET UP

PASSWORD LOCK ON

** PASSWORD? ** 0 1 2 3 4 5 6 7 8 9

. . .

↑

OK RESET

NEW PASSWORD

RET

Note:

ON or OFF can be selected only after going through the password verification.

OFF: You can change all settings.

ON: You cannot change settings at all nor operate AUTO PAN, SEQ, SORT, and PATROL.

2. Press the CAM (SET) button.

Password Verification

3. The password verification menu appears.

3-1 Select a numeral for the first digit with the joy- stick, and press the CAM (SET) button. Though the entered password is not displayed, the up- arrow moves one character to the right.

3-2 Repeat the above step for the 2nd and 3rd dig- its.

Default: 123

3-3 The cursor moves to OK after all the three digits have been entered. Unless you want to change the password, press the CAM (SET) button.

If the correct password is entered, the screen returns to SET UP MENU. ON and OFF settings are the same as made on the SET UP MENU menu is as set in step 1.

If a wrong password is entered, the screen returns to the verification menu. Repeat steps 3-1 to 3-3 to verify the password.

-34-

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Operating Instructions English Version Important Safety Instructions EnglishDisclaimer of Warranty Limitation of LiabilityAccessories FeaturesOptional Accessories Precautions About the Camera Cleaning Function Contents Construction Wiring the Camera Installation PrecautionsCamera Installation Location Noise interference considerationsCommunication Parameters DIP Switch DIP Switch SettingsBeware of high humidity Unit Number DIP Switch RS485 Communication Parameters DIP Switch Cutout in Diecast Case Camera InstallationInstalling the Camera Cutout in Decoration CoverSideway Cable Exit Top Cable ExitUninstalling the Camera Uninstalling the CameraHow to Assemble the Cable with the Accessory Connector PrecautionsAccessory Connector Information ConnectionsRS485 Connection RS485 Setup OFF ↔ 100MS ↔ 200MS ↔ 400MS ↔ 1000MSUsing the Setup Menu Setup MenuPage Setup Menu Description Special 1 Menu CameraGain Control AGC ALC Mode with BLC OFFShutter Speed Shutter Synchronization Sync10Special 2 Menu SPECIAL2 Auto Focus AF ModeRS485 Communication 11Self-diagnosis FunctionPreset Menu Setting ProceduresMenu Display To Set Panning/Tilting Positions Position Setting Position SETPan Offset To Copy a Preset ID from Another Position Preset Identification Setting Preset IDTo Enter a New Preset ID To Set the Lens Zoom and Focus PositionsTo Delete an Entered Preset ID Light Control Setting ALC/MANUALTo Change an Entered Preset ID To Set a Display Position for a Preset IDTo Return to the Preset Number Set Menu Scene File Setting Scene FilePreset Speed Setting Preset Speed To Return to the Setup MenuHome Position Setting Home Deleting Preset PositionsSelf Return Setting Self Auto Mode Selection Auto ModeAuto Pan Key Setting Auto PAN KEY SEQ Sort PatrolDigital Flip Setting Digital Flip Password VerificationNew Password Special 1 Menu Setting SpecialPrivacy Zone Privacy Zone Proportional Pan/Tilt PROPO. P/T Zoom ratioSetting for on User Settings for on NeswArea Title Area Title To Quit Editing Patrol-learn and Patrol Play PatrolArea Title Editing Patrol Play with a Controller Having the Patrol Button Patrol Learn with a Controller Having Patrol ButtonPatrol-learn with a Controller not Having the Patrol Button Patrol Play with a Controller not Having the Patrol ButtonAlarm Input/Output Alarm IN/OUT CNT-CLS 1, 2 OutputPreset Alarm Preset ALM Cleaning CleaningElectronic Zoom EL-ZOOM Image Hold Image Hold Camera SettingTo Display the Camera Setting Menu Tilt Angle Tilt Angle 0 /5Move the cursor to the BLC parameter and select on Shutter Speed Setting Shutter Electronic Sensitivity Enhancement Sens UP Line-lock Sync Mode LLGain Control AGC on LOW/ MID/ HIGH/OFF Synchronization SyncAuto-Tracing White Balance Mode ATW1/ ATW2 White Balance White BALAutomatic White Balance Control Mode AWC Motion Detector Motion DETAuto Focus Setting AF Mode Auto S Auto M Auto L Manual L Manual M Manual SSpecial 2 Menu SPECIAL2 Digital Noise Reduction DNRTo Restore the Camera Default Position Refresh Reset to the Factory Default SettingsFactory Default Setting Menu SettingSpecifications HighPage Controller Operation Setting ShortcutsIris Close Troubleshooting ProblemProblem Periodically check the power cord and plug Page Panasonic Canada Inc

WV-CS574 specifications

The Panasonic WV-CS574 is a sophisticated surveillance camera renowned for its advanced features and versatile technologies designed to enhance security applications. This camera is particularly well-suited for both indoor and outdoor use, making it a popular choice for monitoring public spaces, commercial properties, and other critical areas.

One of the standout features of the WV-CS574 is its exquisite image quality. Equipped with a high-resolution 1/4-inch CCD sensor, the camera delivers clear and crisp images at a resolution of 480 TV lines. This ensures that even in challenging lighting conditions, the camera can maintain its performance, providing reliable surveillance footage for security personnel.

The WV-CS574 incorporates a powerful 18x optical zoom lens combined with a 12x digital zoom, allowing for detailed close-ups of objects or individuals that may be far from the camera. This flexibility is crucial for identifying faces and license plates from a considerable distance. The camera also supports automatic focus, which simplifies the process of capturing sharp images, minimizing the chances of blurry footage.

Panasonic ensures that the WV-CS574 can adapt to a variety of environmental conditions through features like automatic backlight compensation and digital noise reduction. These technologies work together to optimize the camera's performance in varying light situations, whether it’s bright sunlight or dimly lit areas. Additionally, the camera’s wide dynamic range (WDR) capability helps balance the exposure levels in scenes with both bright and dark areas, resulting in clear images without loss of detail.

The WV-CS574 is designed with ease of use in mind, featuring a user-friendly interface that simplifies configuration and operation. Its pan-tilt-zoom (PTZ) capabilities offer a comprehensive monitoring solution, allowing operators to remotely control the camera's movement for real-time surveillance. The camera can pan 360 degrees and tilt 90 degrees, providing extensive coverage of the monitored area.

Moreover, the Panasonic WV-CS574 is built to withstand harsh environments, with an IP66 rating for weather resistance. This makes it suitable for outdoor installations where exposure to rain, dust, and extreme temperatures is a concern.

The camera supports various video formats, ensuring compatibility with different surveillance systems. Additionally, features like alarm inputs and outputs facilitate integration with other security devices, enhancing overall monitoring capabilities. With its combination of high-quality imaging, robust design, and versatile functionality, the Panasonic WV-CS574 stands out as an exceptional choice for any surveillance needs.
Top Page Image Contents