Panasonic WV-CL920A Setting Procedures, Camera Identification Camera ID Setting

SETTING PROCEDURES

1.Camera Identification (CAMERA ID) Setting

You can use the camera identification (CAMERA ID) to assign a name to the camera. The camera ID consists of up to 16 alphanumeric characters. The camera ID display can be switched on or off on the monitor screen.

** CAM SET UP **

CAMERA ID		OFF	↵
ALC/ELC		ALC	↵
SHUTTER		OFF
AGC		ON (DNR-H)
SENS UP		OFF
SYNC		INT
WHITE BAL		ATW1 ↵
MOTION DET		OFF
LENS DRIVE		DC
END	SET UP ENABLE

To edit the CAMERA ID

1. Move the cursor to the CAMERA ID parameter.

2. Press . The CAMERA ID menu appears. The cursor on the letter “0” is highlighted.

-21-

Character Cursor

		0	123456789
			ABCDEFGHIJKLM	Character
		NOPQRSTUVWXYZ
().,'":;&#!?=				Area
+-*/%$
	SPACE			Command
	POSI RET END RESET
................				Editing
Pointer
				Area

CAMERA ID menu

3.Move the cursor to the character you want to edit

by pressing / / / .

4.After selecting the character, press . The selected character appears in the editing area. (The pointer in the editing area moves to the right automatically at this moment.)

5.Repeat the steps above until all characters are edited.

To enter a blank space in the CAMERA ID

Move the cursor to SPACE and press .

To replace a specific character in the CAMERA ID

1.Move the cursor to the editing area by pressing

.